otras máquinas para el procesado de metales usadas para la venta (11,464)

Basic set 1 / 24 piecesfor table top thickness 15 and 25mm4 pcs clamps clamping height 300mm, projection variable8 pcs clamping bolts2 pcs stop 100mm4 pcs stop 150mm2 pcs stop 225mm1 piece torch holder1 pc hole brush 30mm1 pc release lotion 500ml1 pc welding table cleaner on a natural, biological basis 500mlNumber 24 positionsWeight 22 kg

Pipe bender>br>- performance 3/8" to 2" pipe>br>- tools for 3/8">br>- incl. base>br>see pictures

Pneumatic press>br>incl. tool and foot pedal>br>see pictures >br>condition: untested (6)

Technical data Note: There was no original machine documentation. All subsequent technical data were read from the nameplate to the best of our knowledge and taken from publicly available sources. Manufacturer: COMCO Type: WE 680/4 Year of Make: 1987 Serial Number: 100 Machine Type: Hydraulic Press Operating voltage: 380 V Frequency: 50 Hz Motor power: 11 kW Max. pressure: 200 bar Press force: 300 kN Air pressure: 6 – 10 bar Machine weight: approx. 3,000 kg Configuration 4-post design Hydraulic power unit Safety Light Curtain (SICK) Protective grille / enclosure Electrical control cabinet with control panel Pressure gauge (pressure gauge) Hydraulic control with valve block

Pneumatic press>br>pressure max. 7.5t>br>table 250 x 200mm>br>projection 100mm>br>incl. tool and foot pedal>br>see pictures >br>

Equipment/accessories: - Footswitch - Mobile base frame With a lot of bending tools See pictures Bending capacity steel pipe 2" Dimensions 1300 x 8000 x 1300 mm Machine weight approx. 250 kg

x-travel:3.000 mmy-travel:700 mmz-travel:1.200 mmSpindle RPM:2.500 1/mintool taper:SK50

Special Set 70 / 28 70-piece, 28mm system, consisting of: 3x Pipe Screw Clamp D28 90° – Art.Nr. 4028397 3x Pipe Screw Clamp D28 180° – Art.Nr. 4028396 3x Pipe Screw Clamp D28 45° – Art.Nr. 4028398 3x Pipe Screw Clamp D28 300x150 – Art.Nr. 4028399 3x Pipe Screw Clamp D28 300x200 – Art.Nr. Reference 4028400 15x Ball Lock Pin D28x50 – Art.Nr. 4027663 10x Stake-out bolts D28x80 – Art.Nr. 4028876 4x Universal Stop D28 100x50x25 mm – Art.Nr. 4028469 4x Universal Stop D28 150x50x25 mm – Art.Nr. 4028470 4x Universal Stop D28 225x50x25 mm – Art.Nr. 4027657 2x Universal Stop D28 300x50x25 mm – Art.Nr. 4027659 2x Stop Clamping Bracket D28 75x50x75x25 mm – Art.Nr. 4028657 2x Stop Clamping Bracket D28 175x50x75x25 mm – Art.Nr. 4028658 2x Stop Clamping Bracket D28 175x50x175x25 mm – Art.Nr. 4028649 2x Stop Clamping Bracket D28 175x50x75x25 mm – Art.Nr. 4028652 2x Stop  ...

Jaw width: 125 mm With hydraulic connection

SICK Optex VT 180-N410 Optic Electronic, 6 008 790 , 0426S 12563 , Made in Japan

Electrode furnace:Capacity 5 KgInner dimension (LxWxD) 100 x 75 x 450 mmPower 0.4 kwConnection voltage 220 - 240 VSetting device 30 - 180 degreesWeight 10 kgDimensions L x W x H 570 x 200 x 150 mm Condition: never used / new (5)

Welding turntable with - foot switch- tilt/swivel by hand - speed infinitely adjustable - 250 Ampere welding current transmission Table diameter 300 mmTable load 50 KgSwivel range 90 degreesSpeed 1 - 12 infinitely variable rpmTable load 50 kg verticalTotal power requirement 220 kWMachine weight approx. 0.036 tSpace requirement approx. 0.45 x 0.43 x 0.38 m Condition: never used / new (5)

2 tension blocks: Base plate: 370mmx370mm Grid spacing 40mm Clamping surface 300mmx450mm Clamping width 300mmx300mm M12 Thread 2 tension blocks: Base plate 280mmx280mm Grid spacing 40mm Clamping surface 220mmx450mm Clamping width 220mmx220mm M12 Thread 1 grid plate: 360mmx360mm Grid spacing 40mm Base dimension 460mmx460mm M12 Thread

EBU 80 – Single-column eccentric press – Year of construction 1971 • Manufacturer: EBU Pressen • Machine type: Single-column eccentric press • Type: EBU 80 • Year of construction: 1971 • Machine number: 293 • Press force: 80 t (at 30° before subtitles) • Adjustable stroke: 12–60 mm • Plunger adjustment: 80 mm • Plunger stroke rate: 37–147 strokes/min • Weight: approx. 5,200 kg Dimensions (approx.) • Height: 2,500 mm • Width: 1,500 mm • Depth: 1,800 mm Equipment & Design • Mechanical eccentric press in heavy casting design • Large work table with T-slots • Adjustable stroke • Pneumatic unit with pressure regulator and pressure gauge • Side-mounted control cabinet with controls • Flywheel with protective cover • Tool holder on the ram Condition • Used machine • Signs of wear and tear due to age and use • Paint chipping and dirt  ...

turning diameter over bed:1000 mmturning diameter over slide rest:750 mmturning length:3000 mmweight of the machine ca.:12 tdimensions of the machine ca.:6x2,5x1,8 mspindle bore:110 mmturning speed range:900 U/minYear:1986 Equipment:- Coolant device- 1 static steady rest- 1 rotating steady rest- Faceplate 1.000 mm- Digital display- Rapid traverse

Workstation- Hole diameter: 28mm- Grid 100 x 100mm- Side walls 150mm- Table thickness 10mmTable length 1200 mmTable width 800 mmTable height 980 mmLoad capacity kgMachine weight approx. 0.95 t

Included: 1 Probe Arm Holder Computer with monitor Mahr Perthometer PAV-CV Granite measuring plate 500 mm x 700mm

Hand-held machine is equipped with:>br>- 8 pcs. Roll sets>br>sheet thickness 0.8 mm>br>projection 180 mm>br>Roll diameter mm>br>Machine weight approx. 22 Kg>br> space requirement approx. 500 x 450 x 160 mm

faceplate diameter:1400 mmswing diameter:2000 mmturning height:1500 mmmain drive:80 kWfaceplate speeds from - to:1 - 365 U/minmilling motor:37 kWram head dimension:240 x 240 mmmax. ram stroke:1250 mmtotal power requirement:133 kVAweight of the machine ca.:50 tdimensions of the machine ca.:11 x 5 x 6,4 mMachine was overhauled in 2008 by OEMNew control CNC SIEMENS 840 Dautomatic tool changer 72-pcsC-axis with driven toolsAngle-, straight tool holders with CAPTO holder Coolant deviceChipconveyour

Power: 1800W

x-travel:6.300 mmy-travel:2.000 mmz-travel:2.700 mmtool taper:ISO 50 surface area:7.000 x 3.000 mmturning speed range:60 - 4.000 U/minpower capacity:22/30 kWfeeds:0 - 10.000 mm/minrapid traverse:20.000 mm/minTool changer:80 max. workpiece weight:8.000 kgPlate clamping area 7,000 x 3,000 mmCNC rotary table 1,500 mmOrthogonal milling headDeep drilling unitIKZPaper belt filterMeasuring probe

Contents: 2 x manual Rothenberger RP 50, 8x electric water pumps made of stainless steel

x-travel:1660 mmy-travel:760 mmz-travel:660 mmweight of the machine ca.:8700 tdimensions of the machine ca.:4.320 x 3.380 mmdistance spindlenose - table min./max.:808 mmdistance work spindle /surface of the table:155 - 815 mmMachine height:2850 mmfloor space required (w/o switchgear cabinet):4.320 x 3.380 mmspindle motor:11 (10 Minuten) /7,5 (30 Minuten)/ 5,5 (Dauerbetrieb) kWtool taper:SK 40 Spindle RPM:40 - 7.000 (Standard ) / 40 - 10.000 ( Option ) 1/minsurface area:2.000 x 760 mmmax. table load:1.000 kgfeeds X-axis:1 - 5.000 mm/minrapid traverse X-axis:24.000 m/minrapid traverse Y-axis:24.000 feeds Y-axis:1 - 5.000 mm/minfeeds Z-axis:1 - 5.000 mm/minrapid traverse Z-axis:20.000 m/min

TIG welding machine, delivery incl.- Earthing clamp 300 A with 1.5 meters Welding cable electrode holder Italian design 200 A with 2 meters Welding cable - Carrying strapWelding current 10 - 200 AConnection voltage 230 VWeight 16 kgDimensions LxWxH 600 x 300 x 400 mm Condition: never used / new (5)

turning diameter:145 mmturning length:210 mmtotal power requirement:40 kWswing diameter:145 mmSpindle bore sp. 1:56 mm Spindle bore sp. 2:56 mm swing diameter over face slide:145 mmgreates pass round over bed:145 mmRPM Main Spindle:7.000 1/minnumber of workpiece supports:12 Shank diameter:25 mmC-axis RPM:2.000 1/minChuck diameter spindle 1:140 mmChuck diameter Spindle 2:140 mmNumber of tools:12 fach St.Tool bore:VDI 25 Shank diameter:25 mmweight of the machine ca.:5.300 kgdimensions of the machine ca.:5.000 x 4.100 x 2.050 mmSlide path flat: X1, X2, X3: 220mm, 120mm ( 145mm )Longitudinal slide travel: Z1, Z2, Z3: 320mm, 345mm, 380mmVertical slide travel Y1: +/- 30mmLongitudinal spindle travel Z3: 380mmClamping tube inner draw tube 46mm diameterSpeed range main drive 1+2 up to 7,000 rpmSpeed of driven tools up to 6,000 rpmMain and counter spindle collet chuck1 axial driven tool1 radial to ...

spindle diameter:150 mmx-travel:10000 mmy-travel:2500 mmbore spindle stroke:700 mmSpeed of boring spindles:1,25 - 1250 U/min.ram stroke:700 mmdimension of the ram:340 x 340 mm mmspindle taper ISO:50 rapid traverse:5 m/mintotal power requirement:120 kWweight of the machine ca.:115 tdimensions of the machine ca.:15,1 x 10 x 6,4 mCNC control Siemens 840 Dsl completely modernized 2010FIBRO CNC drilling work table 2500 x 2500 mm50 to. workpiece weightLongitudinal travel 2500 mmAngular milling head 4 x 90°Universal angular milling headPanel area approx. 10000 x 5000 mmChip conveyor and coolant deviceAerostatic guides

Includes: Cable protector ducts and LEP Soft Shell outer part