otras máquinas para el procesado de metales usadas para la venta (11,092)

Se ofrece una máquina de taladrar de montaje automático. Tamaño de la pieza L: 100-1350mm, An: 100-600mm, D: 16-25mm, presión de funcionamiento: 6-7 bar, velocidad de extracción del aire: 30 m/s, caudal volumétrico de extracción: 70 m³/min, altura de trabajo: 1000 mm, velocidad de giro eje X: 60 m/min, velocidad de giro eje Y: 50 m/min, sistema de control: Ferrocontrol CNC. Equipado con alimentador vibratorio para bisagras, alimentador vibratorio en espiral para amortiguadores, unidades de perforación e inserción, monitorización de barreras de luz. Peso: aprox. 6000 kg, dimensiones totales X/Y/Z: aprox. 5500 mm/2200 mm/2400 mm. Inspección posible con acordo.

Se ofrece una máquina de perforación e inserción controlada por CNC. Tamaño máximo de la pieza de trabajo: 1350 mm x 600 mm x 25 mm, presión de funcionamiento: 6-7 bar, velocidad de extracción: 32 m/s, altura de trabajo: 1000 mm, sistema de control: Ferrocontrol. Equipado con máquina de dos estaciones para carga alternada, sistema de alimentación para piezas, alimentador vibratorio con campana aislante acústica para bisagras, unidad de perforación e inserción, armario de control y colector de extracción. Peso: aprox. 6000 kg, dimensiones totales X/Y/Z: aprox. 6240 mm/4500 mm/2200 mm. Inspección posible con acordo.

Se ofrece una máquina de corte láser de tubos. Longitud de procesamiento X: 6500mm, diámetro máximo de la pieza de trabajo: 220mm, potencia láser: 3500W, fuente de haz: CO2, horas de encendido: 48817h, horas de haz láser: 9403h, tubo RF: renovado 01/2023. Equipado con cargador en bundle, estación de descarga, sistema de extracción, unidad de refrigeración, mantenimiento anual del fabricante documentado. Peso: aprox. 9000 kg, dimensiones totales X/Y/Z: aprox. 10500 mm/4600 mm/2200 mm. Inspección posible con acordo.

Processes: nickel strike, alkaline/cyanide zinc plating, base material: steel, stainless steel, throughput capacity for racks: approx. 11/h, production time: operating time minus rack cycle time, drums per rack: 1, internal drum length: 870mm, width across flats: 350mm, average loading weight per drum: approx. 37kg, max. loading weight per drum: approx. 50kg, the loading weight depends on the geometric surface area of the parts, anode distance: 650mm (700mm for electrolytic degreasing), operating voltage: 3x 220/380V, 50Hz, Mp/SL (-15 to +10%), heating: electric, heating-up time: approx. 5h at an initial temperature of approx. 15°C, cooling: cooling water, supply: 8°C, return: 12°C, city water: 2bar, circulating water: 2bar, compressed air: 8bar, drive/control power: approx. 166kVA, rectifier power: approx. 240kVA, heating power: approx. 136kW, extracted air volume: cyan./alk. 12,000m ...

Suitable for automatic machining of PCD-tipped milling cutters, shank tools, disc-shaped tools, and optionally profile tools using the disc electroerosion process. Accessories:, Total enclosure,, SK 40 or 50 workpiece carrier according to preference,, Cooling unit for dielectric,, Automatic fire extinguishing system,, Measuring probe,, SK 40 or 50 measuring mandrel depending on workpiece carrier,, Alphanumeric keyboard for data management,, Software package for peripheral machining of end mills and jointing cutters, linear machining in all common axis directions,, Software package for compact and radius machining, profile cutters in path-travel and plunge-cutting processes,, Software package for profile tools, 4-path program for peripheral electrodes,, Software package for circular saws for complete machining of tooth backs and flanks of all common geometries,, Automatic central lubricat ...

Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically -Year of manufacture: 1995

Conjunto completo compuesto por: Long 12 x Tensor 125 mm 48205-125 Placas base largas 12 x QuickPoint 75748 Placa de 1 base larga de la torre QuickTower 70005 Torre de tensión Lang QuickTower 70650

Tool holder, milling holder, milling tool, milling mandrel -Milling tool holder: SK40 tool holders -Cutter holder: Ø 6 mm -Number: 35 milling tool holders available Price: per piece -Dimensions: Ø 64 / 120 mm -Weight: 0.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, soft -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 85/67/H55 mm -Total weight: 1.9 kg

Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Clamping sleeves: Length 78 mm -Clamping size: Ø 32 mm, dimensions see photos -Price/Fee: complete -Dimensions: Ø 55/78 mm -Weight: 0.4 kg

Clamping plate, welding table, welding table, straightening plate -Clamping plate: solid design, with large vise -Clamping surface: 1200 x 1100 mm -Table height: 850 mm -Sheet thickness: 105 mm -Vise: Jaws 150 x 30 mm, clamping range 245 mm -Overall dimensions: 1300/1200/H1060 mm -Weight: 1100 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/80/H66 mm -Total weight: 2.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/80/H66 mm -Total weight: 2.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 85/65/H55 mm -Total weight: 1.6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 75/65/H57 mm -Total weight: 1.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 75/65/H55 mm -Total weight: 1.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 70/65/H57 mm -Total weight: 1.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/80/H65 mm -Total weight: 2.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 20 mm -Dimensions: see photo technical drawing -Overall dimensions: 75/80/H50 mm -Total weight: 1.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 85/65/H55 mm -Total weight: 1.6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 75/65/H57 mm -Total weight: 1.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 25 mm -Dimensions: see photo technical drawing -Overall dimensions: 105/75/H65 mm -Total weight: 2.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 18 mm -Dimensions: see photo technical drawing -Overall dimensions: 60/73/H48 mm -Total weight: 1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 18 mm -Dimensions: see photo technical drawing -Overall dimensions: 60/73/H47 mm -Total weight: 1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 90/90/H55 mm -Total weight: 2.1 kg

A complete Schleuniger cable processing system for processing large cables and wires is available. 1) Cutting and stripping machine Schleuniger MegaStrip 9600, year of manufacture: 2008, cable cross-section range: 0.5mm²-100mm², max. conductor cross-section: 240mm², max. cable diameter: 25.4mm, max. stripping length front/right: 300mm, max. stripping length rear/left: 150mm, max. feed: 2m/s, belt width: 30mm, blade pairs: 4, machine dimensions X/Y/Z: approx. 900mm/800mm/1300mm, weight: approx. 320kg. 2) Rotary cutting unit Schleuniger RU 9600, year of manufacture: 2007, max. opening: 27mm, number of blades: 2, blade system: rotating diametrical blades, max. cutting depth: 6mm, clamping jaws: 4. 3) Cable payoff and feeding unit Schleuniger PF 4600/406.00, year of manufacture: 2010, max. roll weight: 600kg, max. roll diameter: 1050mm, max. roll width: 750mm, roll bore range: 38mm-125mm, ...

Está disponible una máquina de procesamiento de cables totalmente automática Schleuniger con dos estaciones y una estación compacta Strunk. Rango de longitud del cable: 55mm-65000mm, rango de sección transversal del conductor: 0,13mm²-6mm², longitud máxima de desmontado: 18mm, velocidad máxima: 12m/s. Dimensiones de la máquina X/Y/Z: aprox. 3750mm/1450mm/1850mm, peso: aprox. 950kg. Documentación disponible. Es posible realizar una inspección in situ.

Está disponible una máquina de procesamiento de cables Schleuniger totalmente automática con dos estaciones. Estaciones: 2, sistema: Corte-Tira-Terminación, rango de sección transversal del conductor: 0,15mm²-6mm², rango AWG: 26-10, longitud mínima del cable: 60mm, longitud máxima: 65000mm, velocidad máxima: 12 m/s, longitud de desmontaje: 0 mm-45 mm, rango de movimiento giratorio: 0-90, fuerza de crimpado: 20 kN. Dimensiones de la máquina X/Y/Z: aprox. 3650mm/1850mm/1300mm, peso: aprox. 900kg. Documentación disponible. Es posible realizar una inspección in situ.

Reversible clamping device, 4th axis, rotary table, rotary indexing table, controlled rotary table, dividing head, dividing head, rotary indexing table, rotary coupling -Manufacturer: NIKKEN Rotary table with drive -Type: CNC-100 -Recording: SK40 -Clamping: pneumatic -Control: Z3BF UNIT -Tailstock: 2 pieces type P-105 -Dimensions of transport trolley: 600/940/H720 mm -Weight: 119 kg

Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: Straightening plate with support ribs and adjustable feet -Length: 3000 mm -Width: 1250 mm -Sheet thickness: 48 mm -Adjustable feet: Ø 300 x 670 mm -Transport dimensions: 3000/1255/H900 mm -Weight: 3500 kg