Prensas automáticas de estampación (26)

Fuerza de punzonado 45 t. 2 uds. disponibles en stock (Video bajo alimentación a pedido)

pressure: 130 tno. of strokes: 50-250 Hub/minsheet width: 250mm mmstroke: 8-120 mmram - range of adjustment: 100 mmtable surface area: 1600x800 mmram surface: 1600x800 mmhole in the table: 1100x250 mmtable height: 1000 mm: 370 mmweight of the machine ca.: 24 tdimensions of the machine ca.: BxTxH 3900x2500x3800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 75 t, 80 mm, 120 1/min

Presión 75 t Velocidad de carrera 120-600 / min Ancho de la hoja 10-300 mm Tamaño de la mesa 1050 x 820 mm Superficie de sujeción del empujador 960x820 mm Tabla de distancias - Émbolo UK 380 mm Carrera ajustable - máx. 80 mm Longitud de alimentación 0-150 mm Potencia total requerida 20 kW Peso de la máquina aprox. 13 t Unidad de alimentación con velocidad máxima de la cinta 70 m/min Eje excéntrico con cojinetes de 4 pliegues 2 bielas Lubricación central incl. cinta transportadora magnética - En uso hasta 2020 -Instrucciones -Manual - Diagrama de circuitos, etc.

pressure: 75 tstroke: 8-80 mmno. of strokes: 80-200 Hub/minram - range of adjustment: 70 mmtable surface area: 900x600 mmram surface: 900x470 mmhole in the table: 450x180 mmdist. between columns - front to rear: 500x350 mmdist. between pillars (front to rear): 788 mmtotal power requirement: 10 kWweight of the machine ca.: 10 tdimensions of the machine ca.: BxTxH 1600x1200x2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 30 t, 100 1/min

Características técnicas Fuerza de prensado 30 t Velocidad de carrera 100 – 600 mm Carrera del émbolo ajustable hasta 40 mm Altura de montaje 300 mm con placa de sujeción incorporada

pressure: 10 tstroke: 8-40 mmno. of strokes: 120-600 Hub/minram - range of adjustment: 40 mmtable surface area: 380x240 mmram surface: 220x140 mmhole in the table: 220x110 mmtable height: 910 mmtool hole in ram: Ø 30 mmthroat: 135 mmtotal power requirement: kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: BxTxH 1000x1500x2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 75 t, 80 mm, 250 1/min

Fuerza de presión: 75t Mesa: 650 x 560 mm Área del émbolo: 500 x 300 mm Frecuencia de carrera: 50-250 carrera/min Altura de elevación: 8-80 mm Altura máxima de montaje: 400 mm Paso entre las gradas laterales: 300 milímetros Alimentador: Fabricante: GSW Tipo: WV32/80 Ancho de banda: máx. 320 mm Grosor de la cinta: máx. 3,5 mm Diámetro del rodillo: 80 mm

pressure: 25 tno. of strokes: 1500 Hub/minsheet width: mmtotal power requirement: 20 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

máquina automática muy bien conservada con / sin carrete de motor

pressure: 25 tno. of strokes: 1500 Hub/minsheet width: mmtotal power requirement: 20 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

STANZNIETZUF-HRER Fabricante: EM HART Teknologies (Tucker GmbH) Tipo: ERF230000/3 3x5

presión: 40 tNº de carreras: 500 Ancho de la chapa:mmPotencia total requerida: 5,5 kWPeso de la máquina aprox.: TDimensiones de la máquina aprox.: M

pressure: 250 tstroke: 37 mmno. of strokes: 30-240 Hub/minram adjustment: 150 mmtable surface area: 1200x1000 mmhole in the table: 500x180 mmtool hole in ram: Ø52 mmtotal power requirement: 50 kWweight of the machine ca.: 35 tdimensions of the machine ca.: LxBxH 3700x2300x3900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Presión: 25 tNº de carreras: 60-300 Ancho de la hoja de cubo/min: 150 mmRAM - rango de ajuste: 6-50 mmSuperficie de la mesa: 350x400 mmSuperficie del ariete: 250x250 mmOrificio en la mesa: 130x150 mmPeso de la máquina aprox.: 3 t

pressure: 125 tstroke: 10-80 mmno. of strokes: 240 Hub/minram - range of adjustment: 80 mmtable surface area: 850x600 mmram surface: 760x550 mmhole in the table: 850x130 verstellbar mmtable height: 1100 mmtool hole in ram: Ø 50 mmtotal power requirement: kWweight of the machine ca.: 13 tdimensions of the machine ca.: BxTxH: 3000x2000x3300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 tstroke: 8-140 mmno. of strokes: 105 Hub/minram - range of adjustment: 100 mmtable surface area: 900x625 mmram surface: 600x280 mmhole in the table: Ø 150 mmtable height: 1000 mmtool hole in ram: Ø 40 mm: 490 mmweight of the machine ca.: 7 tdimensions of the machine ca.: BxTxH 1800x2200x2600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 315 tstroke: 40-200 mmno. of strokes: 20-100 Hub/minram - range of adjustment: 120 mmram surface: 2000x1100 mmtable surface area: 2000x1200 mmhole in the table: 1700x250 mm: 500 mmcolumn travel -side: 820x650 mmtotal power requirement: 45 kWweight of the machine ca.: 44 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presión: 20 tcarrera: 8-38 mmNº de carreras: 100-1800 Cubo/minsuperficie de la mesa: 400x400 mmpaso de mesa: 380x80 mmaltura de la mesa: 1000 mmpeso de la máquina aprox.: 4 tdimensiones de la máquina aprox.: BxTxH 1600x1600x3100mm m

pressure: 63 tstroke: 10-80 mmno. of strokes: 65-400 Hub/minram - range of adjustment: 80 mmtable surface area: 1030x550 mmram surface: 920x450 mmhole in the table: 700x200 mm: 420 mmweight of the machine ca.: 10 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tstroke: 10-130 mmno. of strokes: 30-90 Hub/minthroat: 330 mmram - range of adjustment: 100 mmtable surface area: 950x660 mmram surface: 540x440 mmhole in the table: Ø 230 mmtable height: 1000 mmtool hole in ram: Ø 50 mmtotal power requirement: 7,5 kWweight of the machine ca.: 7 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presión: 63 tcarrera: 6-60 mmNº de carreras: 90-550 Buje/min: 300 mmsuperficie de la mesa: 780x600 mmsuperficie del ariete: 807x460 mmorificio de la herramienta en el ariete: 40 mmariete - rango de ajuste: 80 mmrequisito de potencia total: 15 kWpeso de la máquina aprox.: 8 tdimensiones de la máquina aprox.: BxTxH 2900x2000x3000 m

pressure: 63 tstroke: 4-60 mmno. of strokes: 85-500 Hub/minram - range of adjustment: 80 mm: 320 mmtable surface area: 750x600 mmram surface: 750x600 mmtotal power requirement: 31 kWweight of the machine ca.: 8,2 tdimensions of the machine ca.: BxTxH 2900x1900x2900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 75 tstroke: 8-80 mmno. of strokes: 80-200 Hub/minram - range of adjustment: 70 mmtable surface area: 900x600 mmram surface: 900x470 mmhole in the table: 450x180 mmdist. between columns - front to rear: 500x350 mmdist. between pillars (front to rear): 788 mmtotal power requirement: 10 kWweight of the machine ca.: 10 tdimensions of the machine ca.: BxTxH 1600x1200x2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 tstroke: 37 mmno. of strokes: 30-240 Hub/minram adjustment: 150 mmtable surface area: 1200x1000 mmhole in the table: 500x180 mmtool hole in ram: Ø52 mmtotal power requirement: 50 kWweight of the machine ca.: 35 tdimensions of the machine ca.: LxBxH 3700x2300x3900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Presión: 40 tDistancia entre columnas: 450 mmCarrera: 20-50 mmAriete - Rango de ajuste: 60 mmSuperficie de la mesa: 370x400 mmSuperficie del ariete: 250x370 mmOrificio en la mesa: 120x280 mmAltura de la mesa: 850 mmPeso de la máquina aprox.: 2,5 tdimensiones de la máquina aprox.: BxTxH 1600x1300x2800 mm

pressure: 100 tno. of strokes: 30-70 Hub/minMax ram stroke: 130 mmram adjustment: 100 mmtable surface area: 950x630 mmram surface: 630x600 mmthroat: 340 mmdayligth: 480 mmcoil: GSW total power requirement: kWweight of the machine ca.: 8,9 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.