prensas usadas para la venta (1,621)

Fuerza de prensado: 3150 kN, dimensiones de la mesa X/Y: 2500 mm/1600 mm, carrera (fija): 280 mm, velocidad de carrera: 20-80 carreras/min, peso: aprox. 68000 kg. Incluye línea de transferencia y alimentación Dreher. El sistema de control está defectuoso. Documentación disponible. Es posible realizar una inspección in situ.

Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible.

Tendríamos todas estas máquinas como un paquete a la venta. 1x Plegadora de 160 a 3 m 1x Prensa plegadora de 60 a 2 m 1x robot KRC 150 1x célula de robot de soldadura con robot Kuka y Fronius TPS4000 1x micra

Carrera: 135 mm, espesor máximo de la hoja: 20 mm, longitud máxima de plegado: 3050 mm, fuerza de prensado: 80 t, presión máxima de funcionamiento: 2975 psi, apertura máxima del troquel: 250 mm, rango de ángulo de flexión: 1-42, capacidad de aceite: 150 L, peso máximo de la herramienta superior/inferior: 40 kg / 115 kg. Dimensiones de la máquina X/Y/Z: aprox. 4000 mm/2050 mm/2450 mm, peso: aprox. 6000 kg. Documentación disponible. Es posible realizar una inspección in situ.

Descripción: Prensa hidráulica de una sola columna con alimentación cíclica Tipo: HEP 100 Características técnicas Conexión eléctrica: 400 voltios/50 Hz +/- 3 % Potencia de accionamiento: 5,5 kW Potencia total requerida: aprox. 6,5 kW Tensión de control: 24 voltios/50 Hz +/- 3 % Hidr. Conexión máx.: 210 bar Juego: 200 bar Datos de rendimiento Velocidades de ariete AB: aprox. 48 mm/seg. con una fuerza de compresión máxima de 100 kN Velocidad de trabajo AB reducida ajustable a: aprox. 10 mm/seg. con una fuerza de compresión máxima de 100 kN Velocidad de ariete activada aprox. 96 mm/seg. con una fuerza de retracción máxima de aprox. 50 kN Carrera del émbolo: máx. 200 mm Caudal de la bomba: aprox. 15 l/min.

Dunkes de prensa de una sola columna TIPO: HZS 160 Características técnicas: Fabricante: Dunkes Modelo: HZS 160 Horas de funcionamiento: aprox. 2250 La máquina está en buenas condiciones y es completamente funcional.

Está disponible una plegadora Durmazlar distribuida por Knuth. Fuerza de prensado: 35t, longitud de plegado: 1350mm, potencia del motor: 5,5kW, carrera: 100mm, velocidad de carrera: 17/min, presión máxima de funcionamiento: 240bar, capacidad de aceite: 150l. Dimensiones de la máquina X / Y / Z: aprox. 1400 mm / 1400 mm / 2100 mm, peso: aprox. 1750 kg, horas de funcionamiento: 1258 h. Es posible realizar una inspección in situ.

- Capacidad de presión: 22 t - Proyección: 175 mm - Carrera: 120 1/min - Ajuste del émbolo: 50 mm - Ajuste de altura de la mesa 50 mm - Ajuste de carrera: 8-80 mm - Mesa: 520 x 400 mm - Émbolo: 250 x 160 mm - Tensor con sujeción de muñón, D35 mm - Potencia del motor 1,5 kW - Funcionamiento muy suave - Desacoplamiento mecánico del acoplamiento de cuña giratoria a través de cilindro neumático - Interruptor de pie neumático - Sin UVV - 4 piezas de pies de máquina - Cable de conexión enchufe CEE 16 A - Conexión de aire con acoplamiento rápido - Peso: aprox. 2.000 kg - Dimensiones: Ancho 820 x Fondo 1100 x Alto 1800 mm

Está disponible una antigua prensa excéntrica de una sola columna WMW. Fuerza de prensado: 25 Mp, par: 25 kpm, área de corte: 630 mm², espesor máximo de la hoja: 3,2 mm, capacidad de trabajo: 50 kpm, espesor de la hoja de paso: 1,6 mm, capacidad de trabajo: 25 kpm, carrera del pistón: 5 mm-60 mm, distancia máxima entre la mesa y el pistón: 400 mm, velocidad de carrera: 112 golpes / min, peso de la máquina: aprox. 1300 kg. Es posible realizar una inspección in situ.

Key data: 630 t, 275 mm

Se vende una prensa de descenso usada, fabricante Sack + Kiesselbach, tipo EP 630. La máquina está en muy buenas condiciones. La prensa trabajó en una empresa de grabado como prensa de prueba. Datos técnicos: Fuerza de prensado: máx. 630 toneladas. Altura de instalación: máx. 325 mm Carrera: máx. 275 mm Peso: 4.000 kg

Key data: 100 t

Venta por cambio a prensa excéntrica Fuerza de prensado 100 toneladas Profundidad de carga 360 mm Carrera 500 mm Luz diurna 800 mm Área del émbolo 530 x 400 mm Altura de la mesa sobre el suelo 710 mm Velocidad de trabajo 10 mm / seg Velocidad de aproximación 150 mm/seg Velocidad de retorno 150 mm/seg Potencia requerida 17 kW Dimensiones L x W x H 1.400 x 2.000 x 3.200 mm Peso de la máquina aprox. 5,1 t Año de fabricación 2001 El precio es neto, se puede reclamar el IVA. Instalaciones de carga disponibles Toda la información sin garantía

Prensa Walter

gebr. Prensa post-plegadora Fabr. Graebener, Tipo GRNM, YOC 2005 fuerza máxima de flexión 16 t. Longitud de la herramienta 1.600 mm Ajuste de la oscilación inferior, hidráulico 2 cilindros Dimensiones 5080 x 3290 x 2540 mm Kj Uovvlllerhyxkenb Peso 65 t.

Fuerza de prensado: 4000 kN, presión de prensado: 320 bar, presión de aceite: 250 bar, fuerza del soporte de la pieza en bruto: 1600 kN, carrera del soporte de la pieza en bruto: 200 mm, dimensiones del soporte de la pieza en bruto X/Y: 1000 mm/800 mm, fuerza de expulsión del soporte de la pieza en bruto: 160 kN, fuerza de expulsión: 63 kN, carrera del eyector: 100 mm, distancia de rebasamiento: 40 mm, tiempo de rebasamiento: 190 ms. Documentación disponible. Es posible realizar una inspección in situ.

Fuerza de punzonado 45 t. 2 uds. disponibles en stock (Video bajo alimentación a pedido)

pressure: 80.0 tstroke: 250 mmtable surface area: 1040 x 260 mmcolumn travel between the guideways: 1040 mmajustment speed: 8.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secengine output: 5.5 kWweight of the machine ca.: 835 kg.dimensions of the machine ca.: 1810 x 700 x 2100 mmFurnishing:- Robust electro-hydraulic workshop press, with fixed cylinder- Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more.- Robust welded steel construction for high demands- Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket- 1x set of V-block prism supports- Manometer for pressure display- simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed- Piston can be stopped in any position- Hydraulic tank mounted on the side- Operation manua ...

pressure: 20 tthroat: 200 mmstroke: 0 - 50 mmtable:: 360 x 550 mmtable:: 140 mm - Bohrung no. of strokes: 160 Hub/minbore: 35,0 mm - Werkzeug compressed air: max. 6,0 bardayligth: 240 mmtotal power requirement: 2,2 kWweight: 1.250 kgrange L-W-H: 1310 x 1250 x 1860 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 tthroat: 200 mmstroke: 0 - 60 mmtable:: 400 x 600 mmtable:: 150 mm - Bohrung no. of strokes: 140 Hub/minbore: 40,0 mm - Werkzeug compressed air: max. 6,0 bardayligth: 300 mmtotal power requirement: 3,0 kWweight: 1.670 kgrange L-W-H: 1150 x 1350 x 2050 mmFurnishing:- Welded steel structure body frame- AISI 4140 (42CrMo4) alloy steel crankshaft- CNC ground for maximum precision SnBz-12 quality- Bronze bearings, ground for minimal surface resistance- 4 sides pneumatic clutch-brake combination- PLC control for safety (PILZ Germany)- Photo cell light barriers around the work table (PILZ Germany)- Two-hand and foot pedal control- Adjustable stroke- Central lubrication system- CE safety approval by TÜV- electrical equipment SIEMENS, SCHNEIDER, PHOENIX, OMRONThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 tthroat: 160 mmstroke: 0 - 40 mmtable:: 270 x 370 mmtable:: 100 mm - Bohrung no. of strokes: 200 Hub/minbore: 25,0 mm - Werkzeug compressed air: max. 6,0 bardayligth: 180 mmtotal power requirement: 0,75 kWweight: 590 kgrange L-W-H: 1.168 x 1.010 x 1.670 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20,0 tstroke: 185 mmtable surface area: 170 mm Breitecolumn travel between the guideways: 510 mmweight of the machine ca.: 112 kgdimensions of the machine ca.: 1630 x 560 x 730 mmFurnishing:- Standard with pressure cylinder that can be moved to the left and right- For aligning, pressing, bending, assembling gears, discs, etc.- Standard with foot pedal and hydraulic hand pump for piston delivery- Standard with support prism for aligning shafts- With automatic piston retraction by integrated return spring as standard- Height-adjustable press table with locking bolts- Large manometer for reading the compressive force- Including two-stage hydraulic pump- Robust construction with welded steel frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 tstroke: 150 mmtable surface area: 185 mm Breitecolumn travel between the guideways: 530 mmweight of the machine ca.: 162 kgdimensions of the machine ca.: 800 x 700 x 1805 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50 tstroke: 200 mmtable surface area: 730 x 205 mmdayligth: 1050 mmcolumn travel between the guideways: 730 mmweight of the machine ca.: 288 kg.Description :- Standard with cable winch- for easy height adjustment of the support table- Piston delivery either manually or pneumatically- Powerful workshop presses for craft and repair businesses- Optimum price-performance ratio thanks to rational design- The standard foot pedal keeps your hands free for the workpiece- Increased range of application thanks to the optionally. available pressure mandrel set (10 pieces).- Pressure cylinder with integrated return spring for piston return- Welded steel frame for heavy use and high stability- Versatile in use thanks to the pressure cylinder that can. be moved to the left and rightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50.0 tchamfer lenght: 2090 mmdistance between columns: 1665 mmcolumn arm: 400 mmtable width: 60.0 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 92.0 mm/secstroke: 200 mmtable height: 910 mmdayligth: 470 mmNumber of working hours: 36.160 htotal power requirement: 6.0 KWweight of the machine ca.: 4850 kgrange L-W-H: 3458 x 2450 x 2450 mm with only approximately 36.160 operating hours ()- Inspected condition - Machine video -https://www.youtube.com/watch?v=x8Z0h2_wA6sEquipment:- CNC electro-hydraulic press brake- CNC control type OPERATEUR 2 with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) CNC-controlled backgauge adjustment (X-axis) CNC-controlled vertical adjustment of the stop fingers (R1+R2) CNC-controlled left-right adjustment of the stop fingers (Z1+Z2) Hand control unit for manual axes movement Pivoting control, front left- AMADA/PROMECAM quick clamping system ...

pressure: 160 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 400 mmram stroke speed: 200 mm/secwork speed: 10.0 mm/minreturn speed: 165 mm/secwork stroke: ca. 350 mmdayligth: ca. 660 mmoil volume: 450 ltr.table height: 830 / 950 mmtable width: 75.0 / 60.0 mmvoltage: 400 Volttotal power requirement: 18.5 kWweight: 13440 kgrange L-W-H: 5150 x 2050 x 3150 mm current new price approx. 90.000 euros special price on request------------------------------------------------------ULTIMA PLUS electro-hydraulic press brake with: increased installation height .. approx. 660 mm increased cylinder stroke .. approx. 350 mm------------------------------------------------------ in checked condition - machine video -https://www.youtube.com/watch?v=chgCaXLnpa8Equipment:- CNC electro-hydraulic die/press brake- CYBELEC CNC control DNC 880 S swiveling control panel, front right 2D graphic ...

pressure: 60.0 tchamfer lenght: 1270 mmdistance between columns: 1000 mmcolumn arm: 410 mmram stroke speed: 160 mm/secwork speed: 10.0 mm/secreturn speed: 165 mm/secwork stroke: 275 mmdayligth: 530 mmtable height: 900 mmtable width: 90.0 mmback stop - adjustable: max. 800 mmoil volume: 150 ltr.voltage: 400 Vengine output: 7.5 kWWeight: 4320 kgrange L-W-H: 2250 x 1960 x 2750 mm Demonstration/demo machine () From our showroom (like new) With very few operating hours--------------------------------------------------CNC press brake with special equipment Version ERGO - knee room for the operator flexible articulated arm mount for the controller increased installation height increased cylinder stroke as well as increased bending beam speeds-------------------------------------------------- Furnishing:- DELEM CNC control model DA-66T graphic/touch screen 2D graphical programming 17 TFT color s ...

pressure: 150 tstroke: 300 mmtable surface area: 1070 x 290 mmcolumn travel between the guideways: 1070 mmajustment speed: 9.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secengine output: 11.0 kWweight of the machine ca.: 1870 kg.range L-W-H: 2200 x 1300 x 2300 mm Exhibition machine from 2021 with only approximately 2 operating hours Condition as new Special price upon requestFeatures:- Robust electro-hydraulic workshop press with fixed cylinder- Ideal for aligning axles, shafts, etc., but also for pressing in. and out bolts, bearings, bushings, and much more.- Robust welded steel construction for heavy-duty use- Table height adjustment via piston rod Includes round steel chain and 2 locking pins Piston rod with metric mount- 1 set of V-block prism supports- Pressure gauge for pressure display- Simple manual control with: 1 feed speed 1 working speed 1 retraction speed- Piston c ...

pressure: 60.0 tchamfer lenght: 2600 mmdistance between columns: 2050 mmcolumn arm: 310 mmworking feed: 10.0 mm/secreturn speed: 61.0 mm/secstroke: 100 - 140 mmdayligth: 450 mmtable height: 860 mmoil volume: 100 ltr.Control: ELGO P8822 operating pressure: max. 200 barNumber of working hours: ca. 2.370 hvoltage: 380 Vtotal power requirement: 5.5 kWweight of the machine ca.: 5000 kg.range L-W-H: 3000 x 1850 x 2050 mm good / well-maintained condition () with only approx. 2,370 operating hours current new price approx. 60.000 euros special price on requestin checked conditions - machine video -https://www.youtube.com/watch?v=PsUeM3O5wAMEquipment:- NC electro-hydraulic press brake- with ELGO NC control unit P8822 Input of target/actual values for back stop Input of target/actual values for depth adjustment ` swiveling operation, front left manual mode selectable- NC controlled axes: Y1 + Y2 + ...

pressure: 80.0 tchamfer lenght: 2050 mmdistance between columns: 1550 mmcolumn arm: 250 mmtable width: 85.0 / 135 mmstroke: ca. 390 mmdayligth: ca. 585 mmajustment speed: 180 mm/secworking feed: 1.0 - 10.0 mm/secreturn speed: 135 mm/secwork height max.: 1050 mmNumber of working hours: 32.495 hoil volume: 200 loperating pressure: 320 bartotal power requirement: 11.6 KWweight of the machine ca.: 7300 kgrange L-W-H: 3700 x 2000 x 3000 mm Good/well-maintained condition ()- in checked conditions - machinevideo -https://www.youtube.com/watch?v=IKyUmzB0WTI-------------------------- -----------------------CNC electro-hydraulic press brake with: Increased installation height .. approx. 550 mm Increased cylinder stroke .. approx. 390 mm-------------------------------------------------Features:- Robust electro-hydraulic press brake MADE IN GERMANY ()- CYBELEC CNC control DNC 904 PS-A (SN 0332) Pivo ...

pressure: 135 tchamfer lenght: 3050 mmdistance between columns: 2600 mmcolumn arm: 410 mmajustment speed: 160 mm/secworking feed: 10.0 mm/secreturn speed: 120 mm/secstroke: 265 mmdayligth: 530 mmtable height: 900 mmoil volume: 200 ltr.control: DNC 880 S Number of working hours: ~ 17.200 htotal power requirement: 15.0 kWweight of the machine ca.: 10250 kg.range L-W-H: 4570 x 2360 x 2900 mm good condition () current new price approx. 80.000 euros special price on request- in checked condition - machine video -https://www.youtube.com/watch?v=dyv7iQXcRt4Equipment:- electro-hydraulic CNC press brake- two synchronized cylinders with HIGH PERFORMANCE hydraulic components- with CYBELEC CNC control - DNC 880S 2D graphic display for display and multiple simulation graphic 2D programming easy handling automatic bending sequence calculation and collision detection large product and tool library aut ...

pressure: 300 tchamfer lenght: 4100 mmdistance between columns: 3710 mmstroke - stepless adjustable: 250 mmcolumn arm: 330 mmdayligth: 500 mmtable height: 940 mmtable width: 250 mmworking feed: 7.0 mm/secreturn speed: 90.0 mm/secControl: konv. operating pressure: max. 305 barvoltage: 380 Vtotal power requirement: 22.5 kWweight: 25200 kgrange L-W-H: 4320 x 2100 x 3500 mm well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=rPOBwTfVReoEquipment:- simple, conventional hydraulic press brake- swiveling control panel, left front- electro-motoric back stop (X axis) adjustment via front control panel (button) with analog position display fine adjustment via handwheel, front- with 3x stop fingers, manually adjustable- electro-motoric depth adjustment (Y1+Y2 axis) with analog position display- 1x split set of 85° deer foot upper tool- 1x MultiV - uni ...