prensas usadas para la venta (1,621)

pressure: 175 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secwork speed: 12.0 mm/minreturn speed: 190 mm/secwork stroke: 275 mmdayligth: 550 mmoil volume: 300 ltr.table height: 900 mmtable width: 90.0 mmvoltage: 400 Volttotal power requirement: 15.0 kWweight: 9800 kgrange L-W-H: 4150 x 2150 x 2800 mm-------------------------------------------------- HIGH-SPEED hydraulic press brake withincreased installation heightincreased cylinder strokeenlarged projection-------------------------------------------------- Furnishing:- DELEM CNC control model DA 66T- swiveling touchscreen control unit- 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning- electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm- on ball screws- controlled electr. Stop fingers Z1 + Z2- split upper deer foot tool Roleri 135.85.R08, System A-  ...

pressure: 200 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 250 mmram stroke speed: 100 mm/secreturn speed: 75,0 mm/secwork speed: 7,0 mm/minwork stroke: 180 mmdayligth: 415 mmoil volume: 200 ltr.table height: 900 mmvoltage: 400 Voltrange L-W-H: 4450x2050x2650 mmFurnishing:- DELEM - CNC control model DA-58T- controlled axes: Y1 - Y2 and X- FIESSLER AKAS - laser protection in front of the machine- Deer foot upper tool- Universal die block- manual table crowning- Safety device: light barrier behind the machine- 2 front support arms- SIEMENS - electrical system- BOSCH / HOERBIGER hydraulic system- CE mark / declaration of conformity- Operating manual: machine and control- Safety manual: press brakes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 tchamfer lenght: 4100 mmdistance between columns: 3550 mmcolumn arm: 510 mmram stroke speed: 110 mm/secwork speed: 8.4 mm/secreturn speed: 130 mm/secwork stroke: 375 mmdayligth: 650 mmtable height: 1000 mmtable width: 240 mmback stop - adjustable: max. 800 mmoil volume: 400 ltr.voltage: 400 Volttotal power requirement: 30.0 kWweight: 26409 kgrange L-W-H: 5450 x 2650 x 3470 mm-------------------------------------------------- HIGH-SPEED hydraulic press brake withincreased installation heightincreased cylinder strokeenlarged projection-------------------------------------------------- Furnishing:- DELEM CNC control model DA 66T- swiveling touchscreen control unit- 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning- electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm- on ball screws- controlled electr. Stop fingers Z1 + Z2- split upper deer foot ...

pressure: 40.0 tstroke: 285 mmflat steel: 250 x 24 mmworking feed: 10.0 mm/secreturn speed: 10.0 mm/minwork height max.: 930 mmtable:: 660 x 1250 mmtotal power requirement: 4.0 kWmotor: 400 Volt 50 Hzoil volume: 40.0 lweight: 800 kgrange L-W-H: 1450 x 800 x 1300 mmFurnishing :- electro-hydraulic horizontal bending machine- large, robust machine table made of hardened steel- Machine made of hardened and ground forged steel- Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible- 1x tool set (1x bending punch / 1x 1V die)- infinitely variable adjustment of the bending speed and pressing force- 1x manual material stop- Free-moving dual footswitch- Machine can be moved with a pallet truck/stacker- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40.0 tchamfer lenght: 1600 mmdistance between columns: 1200 mmcolumn arm: 200 mmram stroke speed: 60.0 mm/secreturn speed: 80. mm/secwork speed: 60.0 mm/secwork stroke: 100 mmtable height: 760 mmtable width: 150 mmoil volume: 130 ltr.voltage: 400 VoltControl: ESA E21 total power requirement: 4.0 kWweight: 3030 kgrange L-W-H: 2050 x 1800 x 2030 mm Demonstration/demo machine () From our showroom (like new) With very few operating hoursFurnishing:- compact hydraulic press brake- BERNARDO NC control model E21- swiveling control panel- electrical adjustment of the backgauge- Back stop on recirculating ball spindles- electrical adjustment of the immersion depth- Laser protection device in front- Upper deer foot tool - divided- Tool holder with quick change system- Universal die block- side + rear protective device- 2x front support arms- movable double foot switch (operation)The data ...

pressure: 20.0 tstroke: 185 mmflat steel: 200 x 12 mmworking feed: 10.0 mm/secreturn speed: 10.0 mm/minwork height max.: 930 mmtable:: 480 x 1060 mmtotal power requirement: 2.2 kWmotor: 400 Volt 50 Hzoil volume: 12.0 ltr.weight: 530 kgrange L-W-H: 1150 x 480 x 1400 mmFurnishing :- electro-hydraulic horizontal bending machine- large, robust machine table made of hardened steel- Machine made of hardened and ground forged steel- Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible- 1x tool set (1x bending punch / 1x 1V die)- infinitely variable adjustment of the bending speed and pressing force- 1x manual material stop- Free-moving dual footswitch- Machine can be moved with a pallet truck/stacker- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 3050 mmdistance between columns: 2550 mmajustment speed: 90.0 mm/secworking feed: 10.0 mm/secreturn speed: 75.0 mm/secstroke: 140 mmdayligth: 375 mmcolumn arm: 250 mmtable width: 90.0 mmwork height max.: ca. 950 mmNumber of working hours: 14.100 htotal power requirement: 13.5 kWweight: 8500 kgrange L-W-H: 3630 x 2300 x 2505 mm From a maintenance workshop Good / well-maintained condition With only approx. 14.100 operating hours ()Equipment:- CNC electro-hydraulic press brake- DELEM CNC control - model DA 58 Swiveling control panel, front left 2D graphic programming & product display Tool & program library- CNC-controlled axes: Y1+Y2 / X1+X2 / R1+R2 / Z1+Z2 / CNC crowning- CNC electro-motorized backgauge (X axes) Stop system with 2x CNC-controlled gantries- CNC electro-motorized height adjustment of the backgauge (R axes)- CNC electro-motorized adjustment of  ...

pressure: 125 tchamfer lenght: 3100 mmdistance between columns: 2550 mmthroat: 250 mmstroke: 120 mmajustment speed: 70.0 mm/secworking feed: 7.0 mm/secreturn speed: 60.0 mm/secdayligth: 325 mmtable width: 180 mmwork height max.: 915 mmoil volume: 150 ltr.total power requirement: 12.5 kWweight of the machine ca.: 9100 kg.range L-W-H: 3200 x 1325 x 2470 mm well-maintained condition from a maintenance workshop ()Equipment:- simple, conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam- electro-motor-driven back stop, with ball screws (X axis) with 2x manually adjustable stop fingers fine adjustment via handwheel at the front, with analog position display- electro-motor-driven adjustment of the immersion depth (Y1+Y2 axis) with digital position display- swiveling operation, left-hand side- split deer foot + pointing tool- 1x rotatable Multi V univers ...

pressure: 175 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 410 mmram stroke speed: 160 mm/secwork speed: 10.0 mm/secreturn speed: 120 mm/secwork stroke: 265 mmdayligth: 480 mmtable height: 900 mmtable width: 90.0 mmoil volume: 230 ltr.voltage: 400 Volttotal power requirement: 18.5 kWweight: 10500 kgrange L-W-H: 4100 x 2000 x 2820 mm Demonstration/demo machine () from our exhibition (like NEW) with very few operating hoursALPMAC manufacturer video:https://www.youtube.com/watch?v=_FxXyPAcxlEhttps://www.youtube.c om/watch?v=YfkX9RwWv_0ALPMAC product video Model B:https://www.youtube.com/watch?v=lmT1tfy43WE------------------------- --------------------------------MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: increased installation height increased cylinder stroke increased projection---------------------------------------------------------! MANUFACT ...

pressure: 56.0 tchamfer lenght: 1400 mmdistance between columns: 1300 mmthroat: 220 mmstroke: 200 mmdayligth: 485 mmwork speed: 8.0 - 10.0 m/minreturn speed: 35.0 mm/secControl: CNC Boschert back stop - adjustable: 0 - 370 mmwork height max.: 915 mmCylinders :: 2 Stückvoltage: 3x 400 Vconnected load: 8.0 kVAweight: 3700 kgrange L-W-H: 2320 x 1280 x 2030 mm very good / well-maintained condition () with lots of bending tools- in checked conditions - machine video -https://www.youtube.com/watch?v=NrpZs6Ar0VoEquipment:- NC electro-hydraulic press brake- BOSCHERT NC control unit, front- NC electro-motorized back stop (X axis) with 2x manually adjustable stop fingers (R+Z axis)- AMADA PROMECAM (SYSTEM A) upper tool holder- AMADA PROMECAM (SYSTEM A) lower tool holder- Handwheel with analog display for adjusting the bending angle- lots of insert tools, including tool cabinet- 1x working cylinde ...

Capacidad de prensa: 63 toneladas Carrera del pistón ajustable: 8 - 60 mm Ajuste de la corredera: 80 mm Altura de cierre (carrera hacia abajo, ajuste hacia arriba): 300 mm Superficie de la mesa: 810 x 550 mm Área de la corredera: 700 x 420 mm Agujero en la mesa: 550 x 140 mm Distancia entre la bandeja de aceite: 700 mm Altura de la mesa sobre el suelo: 920 mm Número de carreras: 65 - 400 s.p.m. Peso de la máquina aprox.: 8 toneladas Dimensiones L x W x H: 2935 x 1170 x 3000 mm Motor principal: 11 kW

Capacidad: 35 toneladas Profundidad de garganta: 225 mm Carrera del pistón: 8 - 80 mm Ajuste de la corredera: 50 mm Altura de cierre (carrera hacia abajo, ajuste hacia arriba): 325 mm Superficie de la mesa: 600 x 450 mm Área de la guía: 300 x 225 mm Número de carreras: 160 s.p.m. Potencia requerida: 2,2 kW Dimensiones L x W x H: 1000 x 1600 x 2200 mm Peso de la máquina aprox.: 1,9 ton

Plegadora con prensa robotizada Stäubli Fabricante: LA G Modelo: GBS R 1250 50 La máquina solo se utilizó durante un período de tiempo muy corto.

CONTROLS  PC controller BECKHOFF PRESS DESIGN  drive system: servohydraulic   frame design: H-frame, tie rod   quick die change system: yes   feedstock transport direction: left to right SLIDE  total force (nominal): 1100 to  stroke: 130 mm  stroke rate (max.): 60 /minCOUNTER RAM  nominal force: 330 to  stroke: 40 mmV-RING  nominal force: 500 to  stroke: 40 mmTOOL DIMENSIONS  lower table (left-right): 960 mm  lower table (front-back): 960 mm  upper table (left-right): 960 mm  upper table (front-back): 960 mm  shut height max.: 470 mmOVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 500 mm  sheet thickness max.: 16 mm  coil weight max.: 8 to  feedstock transport direction: left ...

pressure: 1000 tdistance between columns: 5000 mmstroke: 500 mmHeight of centres: 400 mmMotor output: kWreus: U/minOverall size: 6000 x 2500 mmWeight: 1000 kgDistance between centres: 3500 mmtotal power requirement: kWweight of the machine ca.: 220 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Presión: 200 tLongitud de la mesa: 1600 mmAnchura de la mesa: 1300 mmLuz: 1700 mmPotencia total: kWPeso de la máquina aprox.: 19 tDimensiones de la máquina aprox.: 2,95 5 6 mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Working width: 2500mm, max. sheet thickness aluminium/steel/stainless steel: 3mm/2mm/1.25mm, feeding length range: 575mm-2500mm, feeding width range: 210mm-1500mm, max. bending height: 200mm, max. negative bend: 35mm, max. diagonal twist: 3300mm, rotary table position: 0°/90°/180°/270°, working height: 1150mm. Clamping stroke: 210mm, clamping force: 240kN, clamping lowering and return speed: 50mm/s, upper beam swivel range: 135°, upper beam swivel speed: 90°/s, lower beam swivel range: 135°, lower beam swivel speed: 90°/s. Machine dimensions X/Y/Z: approx. 4050mm/1600mm/2400mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible.

DISEÑO  DE LA PRENSA Sistema de accionamiento: diseño del bastidor hidráulico   : bastidor en C, de un solo lado FUERZAS DE  LA PRENSA Fuerza total (nominal): 12 toCarrera de deslizamiento  : 200 mmESPECIFICACIONES ELÉCTRICAS  Tensión de red: 380 V  Frecuencia de red: 50 HzDIMENSIONES / PESOS Peso total aprox.: 1000 kgContador de  horas: 30'181 HLAST Comprobación de seguridad: 27.07.2023, tiempo de rebasamiento 38 ms, distancia de rebasamiento 60 mm

CONTROLS  PLC SIEMENS S7 PRESS DESIGN  drive system: knuckle-joint   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   feedstock transport direction: left to right PRESS FORCES  total force (nominal): 315 to  nominal work capacity: 38 kNmPRESS TABLE  table surface (left-right): 2000 mm  table surface (front-back): 1200 mm  thickness of bolster plate: 200 mmSLIDE  slide force: 315 to  table surface (left-right): 1995 mm  table surface (front-back): 1100 mm  stroke: 160 mm  stroke rate (max.): 80 /minSLIDE (MECHAN. PRESS)  slide adjustment: 140 mm  stroke rate (min.): 20 /min  stroke rate (max.): 80 /min  main drive power: 90 kWTOOL ASSEMBLY DIMENSIONS& ...

pressure: 100 tthroat: 355 mmstroke: mmtotal power requirement: 11,5 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Oferta 25247 Características técnicas: - Fuerza máxima de prensado 50 t - Carrera máxima del pistón aprox. 260 milímetros - Velocidad de elevación rápida aprox. 1540 mm/min - Velocidad de elevación lenta aprox. 210 mm/min - Ancho del soporte aprox. 770 milímetros - Profundidad del soporte aprox. 195 milímetros - Altura mínima / máxima de instalación aprox. 200 / 1100 milímetros - Mesa ajustable en altura con 5 rejillas de pernos enchufables cada una aprox. 180 milímetros - Placa de soporte aprox. 450 x 450 mm - Ajuste de altura de la mesa con cable de manivela - Accionamiento 400 V / 1,5 kW - Requisito de espacio aprox. L 1750 x Al 2100 x Pr 850 mm - Peso aprox. 600 kg

pressure: 60 tthroat: 280 mmstroke: 10-140 mmno. of strokes: 110 Hub/minram - range of adjustment: 60 mmtable surface area: 740x560 mmram surface: 380x195 mmhole in the table: 300x200 mmtable height: 760 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 35 tthroat: 220 mmstroke: 8-96 mmno. of strokes: 120 Hub/minram - range of adjustment: 50 mmtable surface area: 580x440 mmram surface: 305x170 mmhole in the table: 215x175 mmtable height: 870 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 45 tthroat: 230 mmstroke: 4-80 mmno. of strokes: 120 Hub/minram - range of adjustment: 55 mmtable surface area: 695x455 mmram surface: 365x180 mmhole in the table: 220x180 mmtable height: 890 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: 300 mmstroke: 10-140 mmno. of strokes: 60 Hub/minram - range of adjustment: 60 mmtable surface area: 800x500 mmram surface: 430x230 mmhole in the table: Ø150 mmtable height: 860 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Presión: 25 tThroat: 200 mmCarrera: mmPresión: 25 tNo. Número de carreras: 140 Hub/minventana en el marco: 240 mmajuste de la carrera: 8...80 mmram - rango de ajuste: 50 mmsuperficie del ariete: 355 x 220 mmtamaño de la mesa: 560 x 400 mmagujero en la mesa: 160 mmpotencia total: 3 kWpeso de la máquina aprox.: 2,23 tdimensiones de la máquina aprox.: m- distancia de la mesa deslizante: 250 mmLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Hay disponible una plegadora hidráulica Hämmerle. Fuerza de prensado: 2000kN, longitud de trabajo: 2600mm, altura de instalación: 830mm, carrera: 265mm, profundidad de garganta: 300mm, recorrido rápido: 100mm/s. Dimensiones de la máquina X/Y/Z: aprox. 3750 mm/2600 mm/3600 mm, peso: aprox. 16000 kg. La máquina no funciona. Documentación disponible. Es posible realizar inspecciones in situ.

Prensa de 4 columnas Tox MAg 008288A001 BJ 2016

presión: 200 tchamfer longitud: 3050 mmdistancia entre columnas: 2550 mm carrera del ariete: 274 mmcontrol: Cybelec ModEva Pac requisito de potencia total: kWpeso de la máquina aprox.: 17.000 kgdimensiones de la máquina aprox.: mLos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

pressure: 62 tdistance between columns: . mmstroke: 360 mmTable area: 2500x580 mmdayligth: 400 mmdiameter - coniflex cutter: Zilinderdurchmesser 200 mm0: 200 barStud passage: 590 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mVideo: https://www.youtube.com/watch?v=gkuLoo7ABkcThe tech. Data aremanufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ...