tornos usadas para la venta (3,062)

diámetro de torneado: 950 / 650 mmlongitud de torneado: 2000 / 2500 mmcontrol: HEIDENHAIN Manual Plus Diámetro del mandril de 3 mordazas: 800 mmrango de velocidad de torneado: 40 - 1000 U/minpotencia total: 35 kWpeso de la máquina aprox.: 12 tdimensiones de la máquina aprox.: 8 x 3 x 3,5 m12 x estación TorretaContrapunto2 x Transportadores de virutasPrecio EXW 17036 NeubrandenburgLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning length: 1.300 mmspindle diameter: 120 mmspindle bore: 38 mmcontrol: SIEMENS - 840 D numbers of positions in the tool changer: 12 tool taper: VDI 30 CNC Turning- and Milling Center | NILES-SIMMONS - N10 equipped with Y-axis, turret for driven tools, steady rest, and tailstock.The machine is in well-maintained condition.For further technical details, please refer to the attached offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: N-10 | N 10 | N10/2 | N10-2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0554 mm: 370 mm: 2000 mm: 280 mm: 104 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm: 240 mm: 1250 mm: 190 mm: 54 mm: 5,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 3.000 mmgreates pass round over bed: 810 - 760 mmswing diameter over slide rest: 740 mmcontrol: SIEMENS - 840 C max. turning diameter: 800 mmturning diameter over slide: 740 mmtravel -x2 axis: 875 mmtravel -z2 axis: 3.700 mmCNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000equipped with a well as travelling lynette and tailstock.Additional equipment:- Centering points,- Jaw sets,- Clamping jaws,The machine is in a well-maintained condition andcan be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: N-40 | N 40 | N40MC3000 | N40MCThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mandril de planeado y mandrinado de precisiónWMWA 100 - 4 ( A100-4 )TGL 32680 ( TGL32680 )Dimensiones: 210 x 100 x 85 mm

Herramienta de mandrinado, cepillado y cabezal de mandrinadoPAGUSMK4Diámetro del soporte de la barra de perforación: 25 mmen caja de maderausado, probado !Dimensiones: 390 x 210 x 230 mm

Plancha automática, rectificadora de ejes, MAE-25RH, 1996, usada Fabricante: Maschinen- & Apparatebau Götzen GmbH, Alemania Carga conectada: 14,5kva, Dim.: 2,5 x 1,5 x 1,8 m, Peso: 5000 kg

Weiler DA 180 / 1000 - Tornos universales - Indicador de posición ACU-RITE - Fusil de 3 mandíbulas 200 mm - Portaherramientas de cambio rápido - Dispositivo de refrigerante - Iluminación de lugares de trabajo - Protección de alimentación - Pared trasera de apagones - diversos portaherramientas y herramientas - Manual de instrucciones - Año de construcción 2000 Datos técnicos Husillo principal: - Cabeza de husillo según DIN 55027: Gr. 6 - Diámetro del husillo: 52 mm - en el rodamiento delantero: 83 mm - Cono interior: metr. 57 - Número de velocidades: 12 - Rango de velocidad: 33–1500 rpm Contrapunta: - Diámetro de la punta de la pala trasera: 65 mm - Afilado Morse: Mk 4 - Paso del tornillo de avance: 6 mm - Sección transversal de la broca de torno: 20 × 20 mm Áreas de trabajo: - Circulación sobre lecho: 380 mm - Deslizador giratorio so ...

Intos Zebrak S 32 - Torno universal - INDICADOR DE POSICIÓN ACU-RITE DRO 200S - 2 mandrillas de 3 mandíbulas 160 mm - 1x mandril de 4 mordazas 140 mm - Chuck Collet - Lynetta fija - Portaherramientas de cambio rápido - Dispositivo de refrigerante - Protección de alimentación - Pared trasera de apagones - Iluminación de lugares de trabajo - Diversos accesorios como portaherramientas, collares, herramientas y engranajes de repuesto Datos técnicos - Ancho central / longitud de giro: 1000 mm - Giratorio sobre la cama: 320 mm - Soporte rotatorio / corredera transversal: 190 mm - Diámetro del husillo: 36 mm - Montura de husillo: M40 (1:2) - Quill de contrapunta: MK3 - Ancho de cama: 250 mm - Velocidades del husillo: 20 - 3200 rpm (54 pasos) - Avances longitudinales: 0,03 – 3,52 mm/revoluciones (36 escalones) - Avances transversales: 0,015 – 1,76 mm/rev ( ...

This 4-axis Okuma LB200-MW was manufactured in 2006. It features a tool turret with 12 positions and driven tools, providing versatility for various machining tasks. The machine has a spindle bore of approximately 42 mm and includes optional equipment such as a chip conveyor and coolant tray. If you are looking to get high-quality turning capabilities, consider the Okuma LB200-MW horizontal turning machine we have for sale. Contact us for further details.

This 3-axis Okuma GENOS L3000-e (Mx450) was manufactured in 2022. It features a powerful 22 kW main spindle motor with a maximum speed of 3,800 rpm. The machine includes a V12 radial turret for milling, a chip conveyor, and a touch setter for tool presetting. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L3000-e (Mx450) horizontal turning machine we have for sale. Contact us for further details.

This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine.

Key data: 12 mm

Stohm 125 NAR, # 10594, sin tubería de alimentación por varilla

Tornos automáticos suizos MS 7, sin tubo de alimentación de barra