trabajo con chapas de metal usadas para la venta (3,285)

diámetro del tubo: 4-28 mmpotencia total requerida: 1,5 kWpeso de la máquina aprox.: tdimensiones de la máquina aprox.: m- tipo de curvatura: 4-28 mm- ángulo de curvatura: 190 (ohne Rohr)- radio de curvatura: 1,5 x D – 2,0 x D- presión nominal: 250 bar- presión de funcionamiento: 3095 mm n. re.- tasa de entrega: 4,5 l/minLos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

ancho de banda: 850 mmpotencia total requerida: 3,8 kW5 a. Bobina Schleicher- carga máxima: 5 a- Ancho de la banda: 1500 mm- Espesor de la cinta: 1 mm- Año de construcción: 23/04/92- Tensión: 24/380 V 50 Hz- Potencia: 3,8 KWIncluyendo: Elevador de bobinas, unidad de alimentación, panel de control, unidad hidráulica, armario de controlLos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

sheet width: 3100 mmplate thickness: 16 mmdistance between columns: 60 mmtotal power requirement: 30 kWweight of the machine ca.: 13,2 tdimensions of the machine ca.: m- thickness at max. cutting length:16 mm(mild steel 12 mm high grade steel)- cutting length: 3100 mm- cutting angle: max. 2° 25 - depth of gap of standards: 60 mm- rear stop behind blades: 01100 mm- backstop Motor. motoric blade gap adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ángulo de flexión máx. +/-: 180 + 10 tubo: 4100 mm- Tubo redondo de acero hasta 30 x 2,2 mm ²- Tubo redondo de acero inoxidable hasta 30 x 1,5 mm- Tubos cuadrados 20 x 2,5 mm- Tiempo de flexión 90 grados: 1,5 seg (alimentación)- Longitud velocidad de alimentación: 450 mm- Rango de radio máx. 125 mm- Cabezal de flexión independiente de 850 mm de largo- Accionamiento del eje de flexión electrohidráulicoLos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

ancho de banda: 200 mmvelocidad de banda: 20 m/min: 150 kg- Rango de sujeción interno: 200- 550 mmLos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

sheet width: 1020 mmplate thickness: 2,5 mmdistance between columns: 1045 mmdaylight opening: max. 47 mmbending angle max.: 135 °weight of the machine ca.: 290 kgdimensions of the machine ca.: 1,35 x 0,86 x 1,17 mUnused exhibition machine at a special price:Sengmentable upper rail, upper clamping foot-operated, manual bending clampingoperate. The bending performance refers to 380 N/mm² strength.This is an exhibition machine at a special price, so we are selling it without any warranty.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacidad máx. de punzonado y cizallamiento: 400 kN Por ejemplo, perfora agujeros de 20 mm en acero de 15 mm Cizallas en la cizalla plana de acero en acero de 120 mm a 12 mm Más datos técnicos a petición Con un surtido de sellos y troqueles según se desee

Key data: 2040 mm, 4 mm, 1000 mm

Longitud máx. de corte: 2040 mm Espesor máx. de la chapa: 4 mm de acero Tope trasero controlado hasta 1000 mm Tope lateral y extensiones de mesa Limitación de la longitud de corte Iluminación de borde cortado Cuchillo afilado Peso aprox. 3000 kg

Ancho de la hoja: 700 mmEspesor de la placa: 4,0 mmDistancia entre columnas: 720 mmDiámetro de los rodillos superiores: 95 mmPotencia total requerida: 1,1 KWpeso de la máquina aprox.: 0,37 tdimensiones de la máquina aprox.: 0,95 x 0,76 x 1,25 mm

diameter: -- mmworkpiece length: -- mmwork piece width: 15 mmrange of angles: 15-50 °plate thickness: 6-40 mmtotal power requirement: 1,5 kWFeed speed: 3,5 m/min.dimensions: 530 x 395 x 860 mmweight of the machine ca.: 94 kgThe UZ15 RAPID machine is one of the fastest beveling machines withautomatic feed on the market. It is not only suitable forworkshops, but also for assembly work. It has a steplessBevel angle adjustment system. Also, the machine with an automaticfeed equipped. Working with the UZ15 Rapid is therefore very convenient.- For conventional steel (up to a strength of 600 MPA/87022PSI), brass, copper and aluminum materials- For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm- Application range of sheet thickness 6 - 40 mm- The bevel angle can be easily adjusted from 15° to 50° continuously withoutthat a part needs to be replaced- Double-sided bevel (X ...

tube diameter: 60 mmwall strength: 3 mmbending radius min.: 2 x Rohr-Ø ÷ R200 mmbending angle: 0 - 180 °gas tube pipelines: 2 (60.,3mm) mmspeed: stufenlos 0,5 - 2,0 total power requirement: 1,5 kWweight of the machine ca.: 0,7 t- Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length)- Electromechanical drive of the bending axis- hydraulic clamping- mandrel feed / extract- 30 programs x 9 bending angle + correction angleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 950 mmworkpiece width - max.: 1,0 - 50 mmsandingbelt width: 970 mmsandingbelt length: 1900 mmweight of the machine ca.: 1,8 tThe SMD 123 RE is a universal entry-level machine for all-round deburringUniform edge rounding and surface grinding of sheet metaldry process. Suitable for processing steel, stainless steel and aluminium. The non-slip conveyor belt enables safe transport and theMachining even of small workpieces. The two rotor heads ensure an all-round uniformEdge rounding and a directionless finish. The intuitive operation via touch panel allows every employeeget to grips with the machine quickly. The SMD 1 models are installed and ready for operation in a short time. The compact design saves valuable production space. Low acquisition and operating costs lead to shortamortization periods and guarantee economical processing of yourworkpieces.consisting of:- Grinding  ...

x-travel: 1200 mmy-travel: 600 mmz-travel: 600 mmControl: Heidenhain iTNC 530 spindle speed:: 6000 1/min.spindle taper: 50 SKspindle drive: (S1) 10 kWtable surface area: 1300 x 600 mmtable load: 1200 kgfeed speeds: 1-10000 mm/minrapid travel x/y/z: 20/20/15 m/mindistance table - lower edge spindle: 125-725 mmtotal power requirement: 25 kVAweight of the machine ca.: 7,5 tdimensions of machine: 3600 x 2300 x 3000 mmEquipped with: CNC control Heidenhain iTNC 530 Electr. portable handwheel Spindle oil cooler Tool changer 24-pos., double arm changer- Max. tool diameter 80/150 mm- Max. tool length 250 mm- Max. tool weight 8 kg Preparation for hydraulic machine vice Preparation for 3-D measuring probes Chip conveyor Coolant system, coolant through spindle 20 bar Machine documentationWorking hours (date 1st. November 2024):- Control on: 60.818 h- Machine on: 59.598 h- Program cycle: 22.283 h- Sp ...

sheet width: 3100 mmplate thickness: 50 mmpre-bending: 40 mmtotal power requirement: kWweight of the machine ca.: 40 tdimensions of the machine ca.: 6,7 x 3,0 x 3,0 m4-ROLL Hydraulic Plate Rolling MachineWorking length 3100 mmMaximum thickness Pre-bending 40 mmBending 50 mmYield Point: 240 N/mm2Number of rolls 4Motor Power 55 kWMin. diameter mm - Ø Top Roll Diameter x 3Top roll Ø 540 mmBottom roll Ø 510 mmSide roll Ø 440 mmLength 6700 mmHeight 3000 mmWidth 3000 mmWeight 40.000 kgWith:Cone bending deviceInduction hardened rollsDigital readout for side rollsFully welded steel (St-52) frameSeparate moveable control panelDual bending speedsElectronic ParallelismAll rolls are mounted in spherical roller bearingsHydraulically opened/closed drop end controlled from control panelActivation of cone rolling function and position adjustment via buttons onthe control panelCentral rolls ...

ancho de la hoja: 1000 mmespesor de la placa: 3,3 mmdistancia entre columnas: 1050 mmdiámetro de los rodillos superiores: 90 mmrequisito de potencia total: 1,1 KWpeso de la máquina aprox.: 0,39 tdimensiones de la máquina aprox.: 1,4 x 0,9 x 1,2 mmDobladora de chapa con dimensiones especiales:- Capacidad 700 x 4 mm- Doblado cónico- Rodillo superior abatible- Dispositivo de seguridad de liberación de emergencia- Documentación- 400V

sheet width: 700 mmplate thickness: 4,0 mmdistance between columns: 720 mmdiameter of upper rolls: 95 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: 0,95 x 0,76 x 1,25 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 10 tworkpiece diameter: 320 - 3200 mmdrum diameter: 300 x 120 mmfeed: 100 - 1000 mm/mintotal power requirement: 1,1 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ancho de la hoja: 5 mmespesor de la placa: 1000 mmdistancia entre columnas: mmrequisito de potencia total: 4 kWpeso de la máquina aprox.: 2,8 tdimensiones de la máquina aprox.: m

sheet width: 1070 mmplate thickness: 3,0 mmdistance between columns: 1100 mmdiameter of upper rolls: 95 mmtube diameter: 140 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: 1,35 x 0,76 x 1,25 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Espesor de la placa: 8 mmLongitud de la hoja: 250 mmÁngulo ajustable desde - hasta: Mesa Fest Superficie: 840 x 750 mmPotencia total requerida: 3,0 kWPeso de la máquina aprox.: 1,3 tDimensiones: 1,4 x 1,1 x 1,5 mMáquina de entallado hidráulica- Interruptor de pedal- 2 piezas de tope de chapa

Espesor de la placa: 2,5 mmDiámetro del rollo: 98 mmGarganta: 160 mmPotencia total requerida: 1,5 kWPeso de la máquina aprox.: 0,35 tDimensiones de la máquina aprox.: 550x1400x1500 mSe entrega con:• Versión hidráulica• 4 juegos de ruedas• Pedal de control• Motor de freno• Parada de emergencia

round bar steel: 30 mmsquare edge steel: 25 mmL-beam: 80 x 80 x 8 mm: 200 x 13 / 350 x 6 mm: 40 tthroat: 175 mmwork stroke: 32 mmwork height max.: 980 mmhole diameter in sheet thickness: 20 x 15 / 38 x 8 mmtotal power requirement: 3,0 kWweight of the machine ca.: 0,62 tDimensions (LxWxH): 1,0 x 0,8 x 1,3 0Profile steel scissors with- 1 foot trigger- Support tables- Rectangular notcher- Hole punch including toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 100 x 5 mmborde cuadrado acero: 16 x16 mmbarra redonda acero: 18 mmviga L: 100 x 8 mmdimensiones: 400 x 290 x 280 mmpeso: 35 Kg

ancho de la chapa: 2000 mmespesor de la placa: 8 mmpredoblado: potencia total requerida: 7,5 kWpeso de la máquina aprox.: 3,6 tdimensiones de la máquina aprox.: 3600x1250x1350 m

Espesor de la placa: 1,2 mmDiámetro del rollo: 62 mmGarganta: 100 mmPotencia total requerida: 0,75 kWPeso de la máquina aprox.: 130 kgDimensiones de la máquina aprox.: 1,1 x 0,5 x 1,3 mLa máquina de rebordeado está equipada con:- Interruptor de emergencia- Interruptor de pie- 7 piezas. Juegos de rollos

ancho del material: 1015 mmespesor del material: 1 mmvelocidad: von Peso de la mano: 240 Kgdimensiones: 1420 x 600 x 750 m

sheet width: 1050 mmplate thickness: 3 mmdistance between columns: 1100 mmback stop - adjustable: 600 mmconnected load: 3 kWweight of the machine ca.: 1,1 tdimensions: 1,7 x 2,1 x 1,3 mThe machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

espesor de la placa: 2,5 mmdiámetro del rollo: 98 mmgarganta: 160 mmpotencia total requerida: 1,5 kWpeso de la máquina aprox.: 0,35 tdimensiones de la máquina aprox.: 550x1400x1500 mSe entrega con:• versión manual• 4 juegos de ruedas• Pedal de control• Motor de freno• Parada de emergencia

sheet width: 2070 mmplate thickness: 4 mmdistance between columns: 2100 mmdiameter of upper rolls: 140 mmtotal power requirement: KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1270 mmplate thickness: 3,0 mmdistance between columns: 1300 mmdiameter of upper rolls: 95 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: 1,35 x 0,76 x 1,25 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.