trabajo con chapas de metal usadas para la venta (3,285)

weight max.: 40 tworkpiece diameter: 150 - 4500 mmdrum diameter: 400 x 160 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 1,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1070 mmplate thickness: 2,0 mmdistance between columns: 1100 mmdiameter of upper rolls: 76 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,37 tdimensions of the machine ca.: 1,8 x 0,8 x 1,3 mmSheet bending machine with:- Capacity 1050 x 2 mm- High strength wrought iron rollers with SAE 1050 certificate.- Upper and lower roller driven, feed roller without drive- Footswitch- conical bending- Swiveling top roller- Safety device emergency leash- Documentation- 400 volts- CE certificateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 20 tworkpiece diameter: 500 - 3800 mmdrum diameter: 350 x 150 mmfeed: 100 - 1000 mm/mintotal power requirement: 1,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 40 tworkpiece diameter: 150 - 4500 mmdrum diameter: 400 x 160 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 1,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 20 tworkpiece diameter: 500 - 3800 mmdrum diameter: 350 x 150 mmfeed: 100 - 1000 mm/mintotal power requirement: 1,5 kWweight of the machine ca.: ca. 1,8 tDimensions (LxWxH): 2,2 x 2,7 x 0,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 1380 mmworkpiece height: 70 mm: total power requirement: 45 kWweight of the machine ca.: 5.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Espesor de la placa: 1,6 mm: 4 tLongitud de la hoja: 156 mmÁngulo ajustable de - a: Fest Gradsuperficie de la mesa: 450m x 305 mmPotencia total requerida: Handbetrieb kWpeso de la máquina aprox.: 95 KgDimensiones (LxWxH): 530 x 380 x 480 mm

sheet width: 2050 mmplate thickness: 3 mmdistance between columns: 2100 mmback stop - adjustable: 600 mmconnected load: kWweight of the machine ca.: 1,1 tdimensions: 2,7 x 2,1 x 1,4 mThe machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ancho del material: 305 mmespesor del material: 1,0 mmvelocidad: von Peso de la mano: 45 Kgdimensiones: 500 x 340 x 420 mMáquina combinada de trabajo de chapa con:- Doblado, anchos de herramienta 25 - 50 - 75 - 75 - 105 mm.- Rollos, diámetro del rollo 38 mm- tijeras, máx. 1015 x 1 mm

: 30 x 8 mmborde cuadrado de acero: 12 mmbarra redonda de acero: 15 mmpeso: 0,025 t: 51 x 31 x 22 cmdimensiones: 135 m

Ancho de la hoja: 1270 mmEspesor de la placa: 2,0 mmDistancia entre columnas: 1300 mmApertura de la luz diurna: 48 mm: 135 Potencia total requerida: Handbetrieben Peso de la máquina aprox.: 0,4 tDimensiones de la máquina aprox.: 1,6 x 0,9 x 1,2 mDobladorade segmentos Anchos de segmentos: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 y 260 mm.

: 35 (600) mm: 35 (900) mmL-beam: 50 x 50 x 5 (800) mmT - beam - web outwards: 60 x 7 (600) mmAxis diameter: 50 mmwork speed: 4,5 m/mintotal power requirement: 1,5 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,1 x 0,8 x 1,5 mProfile bending machine with:- Foot pedal right / left- Recording: wave 50mm- with digital display- hardened special steel shafts- 1 set of standard rollers- Lower rollers are driven- Upper roll up and down hydraulically deliverable- Horizontal and vertical operation- Engine with braking deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mmplate thickness: 8,0 mmdistance between columns: 1070 mmdiameter of upper rolls: 150 mmpre-bending capacity: 6,o mmconnected load: 4,0 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 2,6 x 0,65 x 1,1 mm- Electrically adjustable rear roller- Electrically adjustable lower roll (material clamping)- Digital readout for rear roller movement- Digital readout for lower roll movement (material clamping)- Hardened rolls- Conical rolling- Swiveling top roll- Brake motor- Emergency stop- Documentation- 400VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tno. of strokes: 40 - 120 Hub/minsheet width: mmtotal power requirement: 40 kWPressing capacity 160 tonTable clamping area 1,100 x 1,280 mmRam clamping area 850 x 890 mmDistance between guides 1,120 mmDistance between columns (below guide ways) 1,350 mmDistance between Table and ram in upper position approx. 400 mmNo. of strokes 40 - 120 /minAdjustment of stoke 67 / 115 / 160 mmRam adjustment, motor driven 125 mmEjector travel 50 mmTotal electrical load, approx. 40 kW - 500 V - 50 HzWeight, approx. 24,000 kgAccessories / Special Features WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. 8-track slide bearing guide. Automatic oil-circulation lubrication. Hyd ...

: 35 mm: 35 mmbar material dia. max.: 70 x 2 mmrectangle: 60 x 60 x 3 mmflat steel: 60 x 10 mmAxis diameter: 50 mmwork speed: 4,3 m/mintotal power requirement: 1,5 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 0,9 x 0,95 x 1,4 mProfile bending machine with:- Foot pedal right/left rotation- Hardened special steel shafts- 1 set of standard rollers- 2 rollers are drivenThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Oferta 24236 Características técnicas: - anchura de trabajo máx. 2550 mm - capacidad de corte máx. St 40 4,0 mm - Ángulo de corte 1,30 ° - Tope trasero controlado por posicionamiento 20 - 750 mm - Tope de ángulo delantero + brazos de apoyo - E. interruptor de pedal - Velocidad de carrera de hasta 34 rpm en función de la longitud de corte - Accionamiento 400 V / 3 kW - Altura de la mesa aprox. 850 milímetros - Espacio requerido, incluido el tope trasero, sin brazos de soporte delanteros -Ca. 3250 x 1250 x 2000 mm - Peso aprox. 3500 kg

Key data: 1250 mm

Máquina de exposición (sin usar) Anchura de trabajo 1.250 mm Capacidad de flexión del acero: 1,25 (400N/mm2) Ángulo de flexión máx. 135 grados

Nueva dobladora de segmentos Schechtl Ancho de la hoja: 1250 mm Espesor de la chapa de acero: 1,25 mm Espesor de la chapa de aluminio: 2,00 mm Espesor del frente de la chapa: 0,8 mm Color: azul Dimensiones: 1730 x 740 x 1180 mm Peso de la máquina: 290 kg sin tijera de rodillo Ancho de apertura: 90 mm Ángulo de flexión: 150 mm

: 10 mmFuerza de punzonado: 55 a: 40x10 mmacero plano: 300x15 o 200x20 mmViga L 90: 120x120x10 mmViga L 45: 70x70x7 mm: 40 mmacero de borde cuadrado: 40 mm: 37 /min.Garganta: 250 mmPeso de la máquina aprox.: 1.800 kg

material width: 2100 mmmaterial thickness: 4,00 - 6,00 mmno. of straightening rolls: 11 sheet thickness - min.: 0,50 mmdiam. of the rolls ca.: 85 mmstraight. speed ca.: m/ minbetween stands ca.: 2000 mmtotal power requirement: 22 kWweight of the machine ca.: tdimensions of the machine ca.: 4,50 x 1,00 x 2,50 mMechanical height adjustment- Mechanical tilting mechanism- Bottom crowning- ReversibleElectric motor with adjustable speedBearings have been checkedAll lubrication points have been replacedControl cabinet has been rewired and cleanedNew oil has been addedLeveler is powered. Leveling test is possible.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fuerza máxima de punzonado: 50 kN Accionamiento de la carrera mediante pedal

Espesor máx. de la chapa: 2 mm de acero Diámetro máx. de la pieza en bruto: 1000 mm Accionamiento motorizado a través de interruptor de pie

Capacidad de punzonado: 165 kNárea de trabajo: 2070 x 1280 mmespesor de la placa: 6,4 mmcontrol: CC 220 peso de la pieza: 150 kgdiámetro del punzón: 76,2 mm: 80 m/min: 55 m/minpeso de la máquina aprox.: 8000 kg

table length: 3050 mmtable width: 1530 mmburner heads: 1 stroke: 290 mmspeed: 120 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ancho de la hoja: 1020 mmEspesor de la placa: 2,5 mmÁngulo de flexión máx.: 135 Carrera de la viga superior: 25 mm Peso de la máquina aprox.: 285 kgDimensiones de la máquina aprox.: 1,35 x 0,85 x 1,20 m PRECIO: 2.045,-- EUR - con una mejilla superior segmentada oblicua- segmento de distribución: 25-30-35-40-45-50-75-100-150-200-270- hecho con la aplicación del freno de pie

tube diameter: 4-20 mmwall strength: 2 mmbending radius min.: 10 mmbending radius max.: 75 mmbending speed: 35 mm/minpull up length of tube: 2000 mmControl: total power requirement: 7,5 kWweight of the machine ca.: 1,1 tdimensions: ca. 3100x1000x1400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: . tsquare measurement: 55 mmdiameter: 63 mmflat material: 170x20 mmtotal power requirement: kWweight of the machine ca.: tThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Características técnicas: - Longitud de corte de hasta 200 mm - Espesor de corte: acero de hasta 6 mm - Acero inoxidable hasta 4 mm - Ajuste continuo del ángulo de corte 30 - 135 ° - Frecuencia de carrera 60 1/min - Superficie de apoyo de la mesa con ranuras en T de 800 x 1000 mm - Topes de profundidad con ajuste de escala y ángulo - Altura de la mesa 860 mm - Accionamiento 400 V / 2,2 kW - E. - Interruptor de pedal - Necesidad de espacio aprox. 1000 x 1650 x 1700 mm - Peso aprox. 1100 kg

Key data: 3020 mm, 2 mm

con tope trasero del motor, control numérico NC, descenso manual de la viga de flexión, interruptor de pie La máquina es reparada, revisada, limpiada por un profesional y luego es completamente funcional. Se lleva a cabo una prueba de funcionamiento. Ancho de la hoja: 3020 mm Espesor de la chapa de acero: 2,0 mm Espesor de la chapa de aluminio: 3,0 mm Espesor de la hoja frontal: 1,5 mm Ancho de vía: 1000 mm Color: verde Potencia total requerida: 400 V Dimensiones: 3800 x 1000 mm Peso de la máquina: 4500 kg Carrera del haz superior: 200 mm sin tijera de rodillo/ Ancho de apertura: 200 mm

Key data: 2500 mm, 2 mm

con interruptor de pie, con control simple de hasta 6 ángulos de flexión, potenciómetro preestablecido, descenso manual de la viga de flexión, La máquina es reparada, revisada, limpiada por un profesional y luego es completamente funcional. Se lleva a cabo una prueba de funcionamiento. Ancho de la hoja: 2500 mm Espesor de la chapa de acero: 2,5 mm sin tope trasero Color: verde Potencia total requerida: 16 A Espacio necesario: aprox. 3400 x 1000 x 1600 mm Peso de la máquina: 2000 kg sin tijera de rodillo Ángulo de flexión: 145 grados Número de máquina: 50/3