máquinas de soldar usadas para la venta (1,727)

clamping range of chuck: 120 - 380 mmheight: 95 mmdaylight: 170 mmexternal diameter: Futter 400 mmexternal diameter: Spannhebel 600 mmweight: 26 kgCharacteristics:• Self-centering.• Reversible jaws.• Fixed clamping levers allow fast workpiece changes.• Low weight and flat design minimize the center of gravity.The D-D quick chuck enables a quick product change and is suitableexcellent with frequent component changes. You do not need a loose oneQuick release wrench, as the levers are integrated into the quick release chuck.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1200 mmtable load: 1,2 tswivelling range: 0 - 120 Gradturning speeds: 0,06-0,6 U/minmax. torque on the faceplate: 2400 Nmtable pass: 200 mmwelding current: 500 Amperetotal power requirement: 0,75 + 1,1 kWweight of the machine ca.: 1,0 tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping range of chuck: 200 - 500 mmheight: 110 mmdaylight: 240 mmexternal diameter: Futter 320 mmexternal diameter: Spannhebel 700 mmweight: 56 kgCharacteristics:• Self-centering.• Reversible jaws.• Fixed clamping levers allow fast workpiece changes.• Low weight and flat design minimize the center of gravity.The D-D quick chuck enables a quick product change and is suitableexcellent with frequent component changes. You do not need a loose oneQuick release wrench, as the levers are integrated into the quick release chuck.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 920 - 1000 mmweight of the machine ca.: 0,45 tWelding table / hole table:Hole diameter: 28mmThe table is made of 15mm thick S355 steelThe surface is stained and oiled.Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides.Side panels 150 x 10mmHeight adjustable from approx. 920 - 1000mmRibbed bottom for reinforcement.including floor storageAccessories optionalAccessories shown are optionalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1400 mmtable width: 1400 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,5 tdimensions: 1,4 x 1,4 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,45 tdimensions: 2,0 x 1,0 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 4000 mmtable width: 2000 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 2,5 tdimensions: 4,0 x 2,0 x 0,9 mWelding table SIGMUND Professional 750 + Plasma-nitridedis made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table topparallel hole arrangement in 50 mm grid on the sides.Incl. Foot basic equipment. Pictured accessories optional.Price indication plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machin ...

Eine Strecker Widerstandsstumpfschweißmaschine mit integrierter hydraulischer Presseinheit ist verfügbar. Nennleistung bei 50%: 120kVA, Nennstrom: 300A, Betriebsdruck: 350bar, max. Spannkraft: 69kN, max: 44kN, Hydraulikaggregat: K-VDS-700, Schneidleistung: 32mm, Kolbenpresskraft: 44t, schwenkbar: möglich. Maschinenabmessungen X/Y/Z: aprox. 1800 mm/1100 mm/1600 mm, Gewicht: aprox. 2300 kg, Steuerung: VIPA S7. Dokumentation vorhanden. Besichtigung vor Ort ist möglich.

Está disponible un sistema de soldadura de malla de acero para la producción automática de malla de alambre de acero soldada. Rango de ancho de malla: 250 mm-1600 mm, rango de longitud de malla: 600 mm-2900 mm, paso mínimo de alambre cruzado: 15 mm, paso de alambre longitudinal mínimo: 25 mm, incrementos de paso de alambre longitudinal: 5 mm, rango de diámetro de alambre: 3 mm-8 mm, número de alambres longitudinales: 20, número de prensas de soldadura: 12, potencia nominal al 50%: 6x130kVA. Es posible la inspección in situ.

A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioni ...

Máquina de soldar completamente funcional

Máquina de soldar, totalmente funcional

Lg.Nr. 25075 Mot. Mesa giratoria y basculante de soldadura Características técnicas: - Capacidad de carga 1000 kg - Diámetro de la placa frontal 800 mm - La placa frontal se puede inclinar mediante un motor - Movimiento giratorio electr. Ajustable de forma continua 0 - 250 cm/min - Transmisión de corriente de soldadura 650 A - Accionamiento 400 V / 2,8 kW - Altura de la mesa en posición horizontal aprox. 1100 milímetros - Rotación Re- + en sentido contrario a las agujas del reloj - Necesidad de espacio aprox. 1200 x 1100 x 1500 mm - Peso aprox. 850 kg

Características técnicas: - Capacidad de carga máx. 5000 kg - Diámetro máx. de sujeción: 1800 mm - Dimensiones de la placa frontal 1200 x 1200 mm - Movimiento giratorio electr. Infinitamente variable - Derecha + Izquierda – Correr - E. - Mando a distancia - Transmisión de corriente de soldadura aprox. 650 A - Accionamiento 400 V / 2,2 kW - Necesidad de espacio aprox. 1500 x 1650 x 1300 mm - Peso aprox. 2500 kg

table length: 2000 mmtable width: 1000 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,73 tdimensions: 2,0 x 1,0 x 0,9 mWelding table SIGMUND Professional 750 + Plasma-nitridedis made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table topparallel hole arrangement in 50 mm grid on the sides.Incl. Foot basic equipment. Pictured accessories optional.Price indication plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 800 mmtable height: 840 - 890 mmweight of the machine ca.: 0,3 tWelding table / perforated table:Hole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T = 15The surface is untreated.Sidewalls 165mmheight adjustable from approx. 880 - 980mmRibbed underside for reinforcement.including floor storageAccessories optional Surface flatness 0.2 - 0.4mm on 1000mm.The table can be moved with a pallet truck.Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,74 tdimensions: 2,0 x 1,0 x 0,9 mProduct description- High quality steel S355J2+N + plasma nitriding- Material thickness approx. 17 – 19 mm- Bore Ø 22 mm- Holes surface 100x100 mm grid- Rounded corners, edges and holes- Height of side panel 150 mm- Hole spacing in side cheeks 50 mm- Including scaling on the surface- Construction reinforced with ribs- Grid lines enable precise setups- Special equipment for welding tables is available on request.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

corriente de soldadura: 10 - 200 A frecuenciade carga conectada: 230 Vpeso: 16 kgDimensiones (LxWxH): 600 x 300 x 400 mmMáquina de soldadura TIG, la entrega incluye- Pinza de tierra 300 A con cable de soldadura de 1,5 metros- Portaelectrodos de estilo italiano 200 A con cable de soldadura de 2 metros- Correa de transporte

table length: 2400 mmtable width: 1200 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,74 tdimensions: 2,4 x 1,2 x 0,9 mWelding table SIEGMUND Professional 750 + plasma nitridedis made of high quality steel S355J2+N and is plasma nitrided.Surface hardness max. 750 Vickers.The table has a material thickness of approx. 17 - 19.0 mm.The holes have a diameter of 22 mm.Hole arrangement in a 100 mm grid on the table top,Side panels 150mm with parallel hole arrangement in a 50mm grid.Incl. basic foot equipment. Table height 850mmPrice plus packaging and transport.Other dimensions available.The accessories shown are not included in the scope of delivery.Optionally available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 106 Positionenweight: 283 kgcondition: neu : 28 mmSet. 4: 110 pieces 28mm system, consisting of:Ferrules: 14 x 280610.NFerrules: 10 x 280630.NPrism: 6 x 280648.1.NBolt: 30 x 160511Magnetic bolt 8 x 280740Stop: 10 x 280410.NStop: 10 x 280420.NStop: 4 x 280430.NAngle: 8 x 160110.NAngle: 2 x 280152.NAngle: 2 x 280162.NAngle: 1 x 280164.NAngle: 1 x 280165.NAngle: 1 x 280166.NAngle: 1 x 280167.NTrolley: 1 x 280910Accessory set. 1 x 283999Price information plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1200 mmtable load: 3 tswivelling range: 0 - 135 Gradturning speeds: 0,07- 0,7 U/mintable height adjustment: von 980 bis 1750 mmmax. torque on the faceplate: 4500 Nmwelding current: 700 Ampereincluding remote control and welding current transmission.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2000 mmtable load: 10000 Kgswivelling range: 0 - 130 Gradturning speeds: 0,02 - 0,2 U/minheight adjustment: 1450 - 2200 mmmax. torque on the faceplate: 20000 Nmengine output: 1,5 / 2,0 kWwelding current: 1000 Ampere- Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate.The D-HBE series comes as a standard version with a cable remote control and a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mmtable load: 4 tswivelling range: 0 - 130 Gradturning speeds: 0,05 - 0,5 U/min: 8000 Nm0: 1,1 / 1,5 kWwelding current: 700 Ampere• Self-locking gear, therefore no forward and backward at eccentric load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 400 mmtable width: 400 mmtable load: 0,2 ttable diameter: 400 mmswivelling range: 90 Gradturning speeds: 0,2 - 2 stufenlos U/mintable load capacity: 100 kg. vertikaltotal power requirement: 220 kWweight of the machine ca.: 0,065 tdimensions of the machine ca.: 0,56 x 0,42 x 0,46 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 2000 mmtable load: 10,0 tswivelling range: 0 - 135 Gradturning speeds: 0,05 - 0,5 U/minmax. torque on the faceplate: 20000 Nmtable pass: 200 mmwelding current: 1000 Amperetotal power requirement: 3,0 + 4,0 kWweight of the machine ca.: tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1300 mmtable load: 3000 Kgswivelling range: 0 - 130 Gradturning speeds: 0,05 - 0,5 U/minheight adjustment: 1200 - 1800 mmmax. torque on the faceplate: 6000 Nmengine output: 1,1 / 1,1 kWwelding current: 700 Ampere- Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate.The D-HBE series comes as a standard version with a cable remote control and a footswitch.Welding power transmission for max.500Ampere.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1600 mmtable load: 8 tswivelling range: 0 - 130 Gradturning speeds: 0,05- 0,5 U/mintable height adjustment: von 1210 bis 2238 mmmax. torque on the faceplate: 1200 Nmwelding current: 700 Ampereincluding remote control and welding current transmission.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping range of chuck: 10 - 200 mmheight: 67,5 mmdaylight: 65 mmexternal diameter: Futter 200 mmexternal diameter: Spannhebel 360 mmweight: 4 kgCharacteristics:• Self-centering.• Reversible jaws.• Fixed clamping levers allow fast workpiece changes.• Low weight and flat design minimize the center of gravity.The D-D quick chuck enables a quick product change and is suitableexcellent with frequent component changes. You do not need a loose oneQuick release wrench, as the levers are integrated into the quick release chuck.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

peso máx.: 1000 Kgdiámetro de la pieza de trabajo: 20 - 800 mmdiámetro del tambor: 200 x 50 mmalimentación: 50 - 2000 mm/minpeso: 65 kgpotencia total requerida: 0,6 kWdimensiones de la máquina aprox.: 0,8 x 0,6 x 0,6 mbloque de rodillos- trípode de antorcha- Velocidad infinitamente variable- interruptor de pie- Manual de usuario en inglés