máquinas rectificadoras usadas para la venta (2,186)

grinding length:1000 mmgrinding width:250 mmworkpiece height:400 mmtotal power requirement:12 kWweight of the machine ca.:3,8 tdimensions of the machine ca.:3.300 x 1.800 x 2.300 mmhydraulic power unit:400 x1000 x 1500 mmcontrol cabinet:2 Stück, 1000 x 1400 x 1500 mm

grinding length:150 mmtotal power requirement:3 x 380 /220 Vweight of the machine ca.:2100 kgdimensions of the machine ca.:1200 x 1700 x 2000 mmgrinding wheel diameter:280 - 350 mmgrinding wheel width max.:20 mmworkpiece diameter:65 - 120 mmworkpiece turning speeds:1,5 -20 U/minDocuments:vorhanden

working width:880 mmworkpiece height:1- 70 mmwork height max.:1000 mmFeed speed:4- 8 m/min.voltage:50 Hz, 400 Vweight of the machine ca.:2.800 kgdimensions of the machine ca.:2500 x 1715 x1675 mmwidth:min. 350 mmSanding cylinder diameter:420 mmelectr. connected load:20 KWRequired air-pressure:1 x R3/ 8 " pressure:5 bartank:des Bandfilter ca.200 lautomatic magnetic filter unit:vorhanden grinding tools:1540 x 900 mmaccessories::9 Bänder Documents:vorhanden

total power requirement:12 kWweight of the machine ca.:4,6 t

total power requirement:16,5 kWweight of the machine ca.:3,8 t

total power requirement:380V, 50Hz, 7,9A kWweight of the machine ca.:1 tdimensions of the machine ca.:4 x 3 m

grinding length:600 mmgrinding width:200 mmtotal power requirement:5 kWweight of the machine ca.:1,4 tdimensions of the machine ca.:3 x 3 m

grinding diameter:4000 mmcentre height:310 mmweight of the machine ca.:17 tdimensions of the machine ca.:10.5 x 3.6 x 1,9 m

grinding length:1370 mmgrinding width:560 mmworkpiece height:800 mmtotal power requirement:50 kWdimensions of the machine ca.:9 mABA Z&B 2000, profile grinding machine with swivel dresser Mounting fixtures: magnet, dividing head E-axis dresser B-axis dividing head

weight of the machine ca.:7,5 tOut of Valve slide production line:Lidköping centerless grinding machine: Type CL-46

grinding wheel diameter:300 mmvoltage:380 Vtotal power requirement:1,5 kWweight of the machine ca.:310 kgdimensions of the machine ca.:1100x900x1250 mm

Muelas de rectificado: Ø 175 mm × 25 mm × 32 mm Auction-ID: A7-44313-213

Auction-ID: A7-40831-6

Auction-ID: A7-45256-9

: neu : ca. 6 Monate ab Auftragse : Taiwan : 247540 €: 2100 mm: 850 mm: 2000 x 600 mm: 2x 1000 x 600 mm: 0 - 20 m/min: 0 - 5000 mm/min: 0,001 mm: 685 mm: 0 - 2000 mm/min: 0.001 mm: 675 mm: 500 - 2200 1/min: 11 kW: 7710 mm: 3320 mm: 2850 mm: 6530x3200x3350 mm brutto mm: 10200 kg: 900 mm: 1240 kg: 2000 kg: 405 x 50 x 127 mm: 3,1 / 3,1 kW: 7.5 kW: X: 0,008, Y/Z: 0,005 mm: X: 0,006, Y/Z: 0,003 mmSmart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel- RS232, USB I/O connection- SMART Grind Cam (dxf transfer in G code)-PC based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 6 angular contact ball bearings (P4, class 7)Longitudinal guides with double-V-shape w ...

Sin ruedas de rectificado Auction-ID: A1-45239-2148

Auction-ID: A1-45239-2195

grinding length: 1025 mmgrinding width: 520 mmworkpiece height: - mmControl: SINUMERIK 840 D tool taper: HSK-A 63 A - axis: + 110 / - 5 °workpiece weight: 30 kgdistance grinding spindle - table min./max.: 473,5 - 1023,5 mmx-axis: 520 mmy-axis: 550 mmz-axis: 1000 mmV-axis: 166 mmfeed x-axis: 4 - 6.000 mm/minfeed y- axis: 4 - 4.000 mm/minFeed z- axis: 30 - 25.000 mm / min.table dimensions: 1.400 x 874 mmspindle speeds (infinitely variable): 0 - 12.000 U/minpower capacity - grinding motor: 35,00 kWgrinding wheel diam. min/max.: 100 / 300 grinding wheel width: 60 mmtotal power requirement: 100,00 kWweight of the machine ca.: 11,00 tdimensions of the machine ca.: 8,60 x 7,25 x H3,80 m5 Axis Profile grinding machine, with SIEMENS SIN840D,double dividing head (B-C axis), V-axis (coolant nozzles),EROWA tool changing device (machine can also be operated withouta tool changer), fire extinguishing ...

drill diameter: 2.0 - 20.0 mmlip angle: 90 - 135 °turning speeds: 4800 U/minvoltage: 230 Voltengine output: 0.12 kWweight: 8.6 kgrange L-W-H: 285 x 130 x 170 mmThe handy DG 20 M drill grinding machine is ideal for grindingtwist drills made of HSS, cobalt and hard metal. Thanks to the adjustabletip angle of 90° to 135°, this model can be used universally for2-edged twist drills.Properties:- For grinding HSS and hard metal twist drills from 2 - 20 mm- ER 20 and ER 25 collets also enable clamping of intermediate sizes- Optimum grinding result thanks to the specially guided collet- Includes device for sharpening the drill tip- Universally adjustable tip angle from 90° - 135°- Fast and easy grinding processScope of delivery:- CBN grinding wheel- ER 20 collets, 3 - 12 mm 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm)- ER 25 collets, 14 - 20 mm 7 pieces (14 / 15 / 16 / 17 / 18 ...

Auction-ID: A1-44905-134

Auction-ID: A1-45187-217

: neu : ca. 2 Wochen ab Auftragse : Italien : 17940 €: 344.45 €: Dm. 200x78x78 mm: 2800 1/min: 300 mm: 300x150x55 mm: 350x150 mm: 500x160 mm: 3.6 kW: 1020 mm: 820 mm: 2170 mm: 440 kgThis Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it isequippedwith a long column supported by four bearings and is opportunely stiffenedby a sturdy column support.This Surface grinding machine, due to its stiffness and geometrical stability,is highly suitable for grinding with precision pieces of notable height: single or mass-produceddie-shop components, moulds, punches, gears and others.Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motorto the axis,equipping this model of Grinding machine with fixed table,allow preserving perfect work conditions over the years, too.CAST IRON BED to maintain the geometric stability ...

Producto: Máquina desbarbada Rondo 8–35 de ROLLER (8–35 mm) El modelo es un desbarbado de tubo interior y exterior para: Tuberías de acero inoxidable, tuberías de acero Cobre, latón Aluminio Tuberías de plástico Datos técnicos: Diámetro del tubo: 8–35 mm Material: Carcasa metálica/bordes de corte endurecidos Peso aprox. 220 g Características: Muchos filos de corte especialmente endurecidos → desba fácil y rápido Para desbarbado externo e interno Sólido y duradero Carcasa antideslizante, funcionamiento sin vibraciones Auction-ID: A1-45208-42

Auction-ID: A1-45187-216

Auction-ID: A1-45187-215

Producto: Máquina desbarbada Rondo 8–35 de ROLLER (8–35 mm) El modelo es un desbarbado de tubo interior y exterior para: Tuberías de acero inoxidable, tuberías de acero Cobre, latón Aluminio Tuberías de plástico Datos técnicos: Diámetro del tubo: 8–35 mm Material: Carcasa metálica/bordes de corte endurecidos Peso aprox. 220 g Características: Muchos filos de corte especialmente endurecidos → desba fácil y rápido Para desbarbado externo e interno Sólido y duradero Carcasa antideslizante, funcionamiento sin vibraciones Auction-ID: A1-45208-44

workpiece length: 100 mmswing diameter: 80 mmnumber of spindles: 2 Control: FANUC 31i-B5 workpiece weight: 2,00 kgcentre height: 170 mmgrinding wheel diameter: 100 mmgrinding wheel hole diameter: 32 grinding wheel width max.: 20 peripheral speed: max. 125 m/secpassage of steadyrest: 45 - 60 mmtotal power requirement: 75,00 kWweight of the machine ca.: 25,00 tdimensions of the machine ca.: 5,00 x 3,50 x H3,50 mCam grinding machine for Cam-Pieces with FANUC 31i-B5 control,loading/unloading unit, CO2 extinguishing system, for CBN grinding wheel,tailstock, steady, diamond wheel dresser mounted on the dressing spindle,Wheelhead variant 12 (two grinding spindles can be moved separately).The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length: 100 mmswing diameter: 80 mmnumber of spindles: 2 Control: FANUC 31i-B5 workpiece weight: 2,00 kgcentre height: 170 mmgrinding wheel diameter: 100 mmgrinding wheel hole diameter: 32 grinding wheel width max.: 20 peripheral speed: max. 125 m/secpassage of steadyrest: 45 - 60 mmtotal power requirement: 75,00 kWweight of the machine ca.: 25,00 tdimensions of the machine ca.: 5,00 x 3,50 x H3,50 mCam grinding machine for Cam-Pieces with FANUC 31i-B5 control, loading/unloading unit, CO2 extinguishing system, for CBN grinding wheel, tailstock, steady, diamond wheel dresser mounted on the dressing spindle, Wheelhead variant 12 (two grinding spindles can be moved separately).The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Wochen ab Auftragse : Polen : 1760 €: 1 : 1 : 18 mm: 60 °: 2-5 mm: 1800-5850 U/min: 40 mm: 2.2 kW: 585 mm: 156 mm: 238 mm: 10 kgportable bevelling machine for milling edges of plates and pipes made of steel, aluminum alloys, brass or plasticbevel angle and bevel radius depends on accessoriescontinuous bevel width adjustmentoverload protectionelectronic speed controlBASIC SET:BM-18 bevelling machine without accessoriesplastic case32mm open end spannerallen wrench hex s = 6Grease for fixing screws(5 g, 0.17 oz)user manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: 03U-EV4-5