otras máquinas para el procesado de metales usadas para la venta (11,379)

including 1 x PBS fluid reservoir.

Rated power: 19 kVA; Rated current: 29 A; No-load voltage: 280 V; Output current adjustment: 30-120 A; Rated output voltage: 128 V; Max cutting thickness: 45 mm; Cyclic duration factor: 60%; Efficiency: 80%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact 6093

SMC GMPM32-TF25Z Compact Cylinder , 2B1 8DE , G WV , Max 1.0 MPa

SMC ROTARY ACT CRB1BW80-90S-XF , DQ , max press 1.0 mp , 145 psi , Made in Japan

Tool magazine and tool changer Magazine Type: Chain Tool stations 80 pieces Maximum tool diameter: All seats occupied: 95 mm Adjacent places available NC Rotary Table Speed rotary table (B-axis): 20 1/min Coolant pressure 50 bar

SICK WL14-2P430S02 Reflection Photoelectric Sensor, 1028719, Made in Germany

Contents: 2 x manual Rothenberger RP 50, 8x electric water pumps made of stainless steel

Tool positions in the magazine: 80 pieces Coolant pressure 50 bar including 2 additional work pallets

Technical data Note: There was no original machine documentation. All subsequent technical data were read from the nameplate to the best of our knowledge and taken from publicly available sources. Manufacturer: COMCO Type: WE 680/4 Year of Make: 1987 Serial Number: 100 Machine Type: Hydraulic Press Operating voltage: 380 V Frequency: 50 Hz Motor power: 11 kW Max. pressure: 200 bar Press force: 300 kN Air pressure: 6 – 10 bar Machine weight: approx. 3,000 kg Configuration 4-post design Hydraulic power unit Safety Light Curtain (SICK) Protective grille / enclosure Electrical control cabinet with control panel Pressure gauge (pressure gauge) Hydraulic control with valve block

Consisting of various turning tools and turning chisels in different sizes and designs, without table

NC Rotary Table Speed rotary table (B-axis): 40 1/min Tool magazine Tool stations 80 pieces, 60 of which are still populated Coolant pressure 50 bar including 2 additional work pallets

Height 690 mm, travel 7150 mm, mounted on steel beam

End mill, end mill, cutter, shell cutter, milling head, angle cutter, shell angle cutter, angle end mill, prism cutter -Angle milling cutters: Attachment angle milling cutters, prism milling cutters -Type: Ø85 x 35 mm -Hole: Ø 27 mm -Quantity: 1x milling cutter available -Dimensions: Ø 85 x 35 mm -Weight: 0.8 kg

End mill, end mill, cutter, face mill, milling head -Cut-on end mills: Angle end mills, cylindrical end mills -Type: Ø64 x 10 mm -Hole: Ø 22 mm -Quantity: 1x milling cutter available -Dimensions: Ø64 x 20 mm -Weight: 0.2 kg

A lattice box as a loading aid

End mill, roller cutter, milling cutter, disc cutter, slot cutter -Manufacturer: Schuler, end mill cutters, disc cutters -Type: 125Wx12x32 HSS K10 -Hole: Ø 32 mm -Quantity: 1x milling cutter available -Dimensions: Ø 125 x 12 mm -Weight: 0.5 kg

Technical data Manufacturer: Grötzinger Type: SPP 30/90 Year of Make: 1973 Machine number: 10481173/4715 Printing capacity: 30 t Working stroke: 250 mm Cutting surface: 750/1 mm² Working length: 450 mm Work table width: 390 mm Weight: approx. 770 kg Configuration Machine type: Press Nameplate information: Manufacturer: Grötzinger, Pforzheim Execution: Industrial press with 30 t pressure capacity and 250 mm stroke

End mill, roller cutter, milling cutter, disc cutter, slot cutter -Disc cutters: 2 pieces Ø100/125 mm, cross-toothed -Type: 125Øx6x40Ø K10 / 100Øx14x40Ø/ K10 -Hole: Ø 40 mm -Price/Fee: complete -Transport dimensions: Ø 125 x 20 mm -Weight: 0.8 kg

Technical specifications of the accessories Accessories: Press protection grille Manufacturer: LEINHAAS – NILSON, 646 Gelnhausen Type: Nilson Press Guard SDF Factory No.: 1120 Year of manufacture: 03/1979 Configuration Execution: Mechanical press protection grille

FESTO MS6-LRB-1/2-D7-V5-AZ Pressure Control Venti , 530337

End mill, roller cutter, milling cutter, disc cutter, slot cutter -Disc cutter: Ø80 x 20 mm, cross-toothed -Type: WF2-08-40/13 80Ø K10 -Hole: Ø 27 mm -Quantity: 1x milling cutter available -Dimensions: Ø 80 x 20 mm -Weight: 0.5 kg

End mill, end mill, cutter, face mill, milling head -End milling cutter: Face milling cutter -Type: 110x35 N HSS -Hole: Ø 32 mm -Price/Fee: complete -Dimensions: Ø110 x 35 mm -Weight: 1.7 kg

End mill, end mill, cutter, shell cutter, milling head, angle cutter, shell angle cutter, angle end mill -Manufacturer: Greiner, Angle end mill, cylindrical end mill, 2 pieces -Type: W242 Ø60x16xØ22 / Ø48x16xØ22 -Hole: Ø 22 mm -Price/Fee: complete -Transport dimensions: 110/60/H30 mm -Weight: 0.5 kg

SICK WE260-F270. 6020979 Photoelectric Sensor - 1102

End mill, end mill, cutter, shell cutter -Manufacturer: Reishauer, end mill with longitudinal groove, 2 pieces -Type: Comol 80x45x27 Orion 63x40NF Sp450 HSSE -Hole: Ø 27 mm -Price/Fee: complete -Transport dimensions: 145/80/H45 mm -Weight: 1.2 kg

End mill, end mill, cutter, shell cutter -Manufacturer: Reishauer, end mill with longitudinal groove, 2 pieces -Type: 75 x 75H Sp 5000 KHSS-E 75x75x27 -Hole: Ø 27 mm -Cutting material: HSS-E -Price/Fee: complete -Transport dimensions: 150/75/H75 mm -Weight: 2.9 kg

Incl. steel measuring plate with table size 1200x800x30 mm (overall dimensions 1200x800x150 mm)

Technical data Model: HPD 42 Machine No.: 1108 Year of Make: 1971 Press force (continuous run): 42 t Max. distance table–plunger: 340 mm Distance between uprights (longitudinal): 460 mm Diarrhea hole in the table: 162 × 120 mm Plunger surface (W × D): 380 × 320 mm Spigot bore (Ø × depth): 40 × 135 mm Adjustable ram stroke: 6–60 mm Plunger adjustment: 80 mm Stroke rate infinitely variable: 45–230 1/min Drive power: 5 hp Weight approx.: 2,400 kg Configuration Machine Type: Eccentric Press Protective shield control: P. H. Schwarz, type St 83 ZS Year of control: 1979 No.: 71811 3/79

Stationary punching machine W. Meitinger "Record" from 1966. Machine is suitable for stamping and machining metal parts. Classic workshop machine with mechanical drive via electric motor and belt. Ideal for workshops, metal construction or as a robust industrial machine.