otras máquinas para el procesado de metales usadas para la venta (11,051)

Manufacturer: Giovanni CucchiMachine type: Automatic short bar loading magazine for single-spindle / short turningType: DB-EVO70CDesign: Surface loading magazinediameter range: 20-70mmbar length: max. 1500 mmThe advantages of DB-EVO barfeeders at a glance:- oriented loading of the bar material possible (e.g. edge upwards)- dry running - no oil flow- significantly reduces vibrations even with material that is not optimally straight due to the unique design of the guide channel- very high speeds even with profile material (e.g. hexagon, square, flat material and special profiles)- short remaining pieces, as no clamping sleeve is used- very short charging time (charging process still during machining)- solid construction- very low wear of the guide channel- external loading - therefore no stop for new bars necessary, low power consumption (start/stop function)Please, contact us for getting  ...

Different varieties, see photos for more details

This drive box from GTS Antriebstechnik was used in the Ungerer cut-to-length line.

All unused

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M3 EW20° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

Article: Rotary transfer machineManufacturer: PfiffnerType: Hydromat HB-32/45Yob: 2002Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Cabinet dimensions: H: 2000 W: 600 L: 1000

38 pieces HSK 63A tool holders, scope as shown, among them are 28 pieces of surface chucks with cooling channel hole, mostly manufacturers Holex and Garant, diameter 6 to 20 mm many with coolant tube, 10 pieces Weldon, wistle notch mounts, diameter 20 / 25 /32 mm

Lot BWF fixators / machine heavy-duty feet for levelling, adjusting and locking machines and systems. 9 pieces.

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M4,7 EW20° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

including climate chamber and granite table

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M2,5 EW20° 2GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

Included: Shelf

Compressed air consumption: 3 mm air nozzle, 6.0 bar, approx. 34 m³/h, 3 mm air nozzle, 8.0 bar, approx. 44 m³/h, exhaust air volume: approx. 680 m³/h

Thread cutting unit Suhner Tapmaster, serial no.: 623302-00101/12

consisting of four piecesSpeed: up to 6000 rpmReference: Pieper - Lot 135

Jaw width: 125 mmVise length: approx. 470 mmReference: Hansmann - Lot 31

Carrier flange (machine type Reishauer RZ 400/800/1000) + including locking disc T1SP 300x145x160 M 5,5 EW 20° 2GG Cubitron from the company 3M Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

Consisting of 38 pieces and a clamping system, also original from the manufacturer EROWADimensions per electrode holder: 500 x 500 mmReference: Dommel - Lot 8 Weight: approx. 20kg

Diameter: 120 mmReference: Beeper - Lot 41

Jaw width 200 mm, incl. turntable

Ceramic grinding wheels for tooth flank grinding - 145 mm wide Dimensions by machine type Reishauer T1SP 300x145x160 M5 EW20° 3GG from the company 3M Profiling according to specification module m, movement gg, angle of engagement EW Pros: - Risk of grinding burn is close to zero - Up to 50% shorter grinding times - 2-fold reduction in dressing effort - Twice the service life of grinding wheels - Continuous, consistent grinding performance - Significantly higher grinding parameters than standard tools

A total of 5 pieces, Unused, Art.Nr. 12151050060 , see photos for more details

Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: SW (Swabian Machine Tools) / EMAG Type: BAS 03-12 Year of Make: 2003 Serial number: 182.012 Machine Type: CNC Universal Machining Center Operating voltage: 3/PE AC 400 V / 50 Hz Spindle power: 14.5 kW Rated current: 85 A Connected load: 60 kVA Configuration Double station / multi-sided machining Automatic tool changer Chip conveyor / filter system Full fairing Integrated control cabinet

Also from Garant, Prototyp, J.E. L. And others, some new. Weight 2 kg