tornos usadas para la venta (2,995)

turning length: 1500 mmturning diameter: 475 mmturning dia. over face-slide: 290 mmturning dia. in gap: 655 mmturning speed range: 14.0 - 2000 U/minfeeds - longitudinal: 0.05 - 0.736 mm/minspindle passage: 61.0 mmtail stock: MK 4 quill stroke: 200 mmdiameter of quill: Ø 70.0 mmspindle head: DIN 55022 GR 6voltage: 380 Vtotal power requirement: 7.5 kWweight: 2400 kgrange L-W-H: 3080 x 1160 x 1485 mm From a maintenance workshop (university hospital) in good condition () With original documentation + machine cardFeatures:- Robust electric motor-driven conventional lathe- KLOPFER 4-jaw chuck Ø 200- MULTIFIX steel holder with 3x inserts- Movable steel holder guard - Adjustable bed stop- Movable tailstock incl. center point- Swiveling machine light- Machine swing feet - Chip guard (movable from behind)- EMERGENCY stop button at the front - Original operating instructions + machine card The da ...

turning length: 1.300 mmspindle diameter: 120 mmspindle bore: 38 mmcontrol: SIEMENS - 840 D numbers of positions in the tool changer: 12 tool taper: VDI 30 CNC Turning- and Milling Center | NILES-SIMMONS - N10 equipped with Y-axis, turret for driven tools, steady rest, and tailstock.The machine is in well-maintained condition.For further technical details, please refer to the attached offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: N-10 | N 10 | N10/2 | N10-2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 376 mmturning length: 1245 mmcontrol: Siemens 828D greates pass round over bed: 780 mmswing diameter over slide rest: 630 mmmax. turning diameter: 376 mmspindle turning speed range: 2800 U/minspindle drive motor: 22/18,5 kWspindle nose: ASA A2-11 spindle bearing diameter: 160 mmspindle bore: 115 mmbar material dia.: 102 mmc-axis: 0,001 °chucking diameter: 255 mmNumber of tools: 24 St.travel -x axis: 260 mmtravel -z axis: 1350 mmtravel -y axis: 105 (+/- 52,5) mm2nd Spindle:: spindle turning speed range: 4500 U/minspindle motor: 7,5/5,5 kWspindle passage: 62 mmspindle nose: ASA A2-5 total power requirement: 59,5 kVAweight of the machine ca.: 7,9 tdimensions of the machine ca.: 4,4 x 2,1 x 2,2 mEquipped with:- Siemens 828D control system- Chip conveyor- Counter spindle- Workpiece holding arm- High-pressure coolant pump- 12-position turret, 7.5 kW, 5000 rpm- Arm for measu ...

: 0554 mm: 370 mm: 2000 mm: 280 mm: 104 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm: 240 mm: 1250 mm: 190 mm: 54 mm: 5,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0400 mm: 246 mm: 1250 mm: 195 mm: 54 mm: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 670 mmswing diameter over bed slide: 490 mmmax. turning diameter: 490 mmcontrol: SIEMENS - 840 D main spindle bore: 115 mmexternal spindle dia. in forward position: 160 mmCNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock.Additional equipment:- Centering points,- Jaw sets,- Clamping jaws,- 3 jaw chuck,A machine video from the production plant will be shared on request.The machine is in a well-maintained condition and can be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: Heynumat 5 U | Heynumat 5-U | Heynumat 5 U 1500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 960 mmswing diameter over bed slide: o: 860 / u: 730 mmturning diameter over bed slide: o: 860 / u: 400 control: SIEMENS - 840 D forward bearing diameter: 200 mmCNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 24 UK-2 / 2000equipped with a turret for driven tools as well as tailstock.The machine is in a well-maintained condition andcan be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: HEYNUMAT 24 UK | HEYNUMAT 24-UK | HEYNUMAT 24 UK 2 2000The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 3.000 mmgreates pass round over bed: 810 - 760 mmswing diameter over slide rest: 740 mmcontrol: SIEMENS - 840 C max. turning diameter: 800 mmturning diameter over slide: 740 mmtravel -x2 axis: 875 mmtravel -z2 axis: 3.700 mmCNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000equipped with a well as travelling lynette and tailstock.Additional equipment:- Centering points,- Jaw sets,- Clamping jaws,The machine is in a well-maintained condition andcan be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: N-40 | N 40 | N40MC3000 | N40MCThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mandril de planeado y mandrinado de precisiónWMWA 100 - 4 ( A100-4 )TGL 32680 ( TGL32680 )Dimensiones: 210 x 100 x 85 mm

Herramienta de mandrinado, cepillado y cabezal de mandrinadoPAGUSMK4Diámetro del soporte de la barra de perforación: 25 mmen caja de maderausado, probado !Dimensiones: 390 x 210 x 230 mm

Plancha automática, rectificadora de ejes, MAE-25RH, 1996, usada Fabricante: Maschinen- & Apparatebau Götzen GmbH, Alemania Carga conectada: 14,5kva, Dim.: 2,5 x 1,5 x 1,8 m, Peso: 5000 kg

Key data: 500 mm, 1000 mm, 2500 1/min

Lathe Voest Alpine Steinel WNC 500 S x 1000 Diámetro de giro 500 mm Longitud de giro: 1000 mm Sistema de control Sinumerik 810 T-GA 2 Caja de cambios de 2 etapas i = 4 Potencia: 37 KW al 100% de ED Par máximo durante las curvas: 1450 Nm Manual del contrapunto con sujeción y acoplamiento Velocidad máxima 2500 rpm Volante electrónico Para fresado: servomotor hidráulico giratorio de 720 Nm y máximo 18,5 rpm Torreta de disco de 12 velocidades con herramientas accionadas, máximo 3000 rpm a 4 kW Portaherramientas VDI 40 Muchos portaherramientas VDI 40 para mecanizado interno y externo, así como para herramientas accionadas, ¡incluyendo algunas herramientas, por ejemplo, aceros de torneado interno o sin herramientas!

Máquina de torneado horizontal fabricada en 2008. Este Weiler E70 / 2000 cuenta con una cama basculante de 720 mm y un peso máximo de la pieza de 2.500 kg. Incluye un soporte estable, contrapunta y placa frontal, lo que proporciona versatilidad para diversas aplicaciones. Con un rango de velocidades del husillo de 1 a 1.800 rpm y una potencia principal robusta de 37 kW, esta máquina está diseñada para la precisión. Si buscas capacidades de torneado de alta calidad, considera la máquina Weiler E70 / 2000 que tenemos a la venta. Contáctanos para más detalles.

Este Weiler E50 se fabricó en 2009. Una robusta máquina de torneado horizontal con un diámetro de giro sobre la cama de 570 mm y un diámetro de husillo de 83 mm. Ofrece una cama de 350 mm de ancho y una sección transversal de la herramienta de torneado de 32 x 25 mm. Ideal para operaciones de giro precisas y eficientes. Contacta con nosotros para más información sobre esta máquina.