We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategorías
Fabricante
- (3)
- Atomáticos de multiuso (31)
- Automáticos de alimentos (1)
- Automáticos de doblaje largo (6)
- Automáticos de doblaje largo CNC (29)
- Bancos de postgiro (2)
- Camas inclinadas CNC (2)
- Centros de torneado CNC (244)
- Centros de torneado horizontal (14)
- Centros de torneado verticales (2)
- Laminadoras de roscas y roscadoras con cabezal giratorio (1)
- Lunetas (16)
- Lunetas móviles (1)
- Máquinas de accionamiento central (1)
- Maquinas de doblaje largo CNC (31)
- Máquinas de elaboración final (1)
- Máquinas de mandril de tres levas (1)
- Máquinas giratorias de presición (7)
- Otros tornos (19)
- Platos de torno (1)
- Tornos (109)
- Tornos automáticos (17)
- Tornos automáticos de barras (2)
- Tornos automáticos husillo de barras (3)
- Tornos automáticos monohusillo de barras (8)
- Tornos automáticos multihusillo de barras (28)
- Tornos automáticos multihusillo de plato (1)
- Tornos cíclicos (35)
- Tornos cíclicos CNC (42)
- Tornos CNC (568)
- Tornos con husillo de cilindrar y roscar (255)
- Tornos de bancada inclinada (1)
- Tornos de barras (5)
- Tornos de barras automáticos con contrahusillo (1)
- Tornos de doble husillo CNC (19)
- Tornos de husillos excavados (3)
- Tornos de husillos múltiples CNC (10)
- Tornos de plato horizontal (53)
- Tornos de plato horizontal CNC (42)
- Tornos de precisión (6)
- Tornos de puntas (3)
- Tornos de refrentar (8)
- Tornos de refrentar con contrapunto (1)
- Tornos de retornear (5)
- Tornos de roscado exterior (1)
- Tornos especiales (2)
- Tornos horizontales (4)
- Tornos para mecánicos (6)
- Tornos pesados (37)
- Tornos revólver (7)
- Tornos universales (27)
- Tornos universales de Ø más de 800 mm (9)
- Tornos universales hasta Ø 800 mm (8)
- Tornos verticales (75)
- Tornos verticales (con plato horizontal) de un o dos montantes (1)
- Tornos y tornos automáticos (2)
- Tronzadoras (8)
- más
- abb (3)
- ACCUWAY (4)
- AI HEMBRUG (1)
- AJAX (1)
- ALEX TECH (2)
- ALEX TECH VIPER (1)
- AMUTIO-CAZENEUVE (1)
- ANTONIO ANSELMI (1)
- ARAD (1)
- ARGUS - FLOWSERVE (1)
- AVIA (1)
- AYEL-TECH (1)
- BAUER (2)
- Benzinger (9)
- BERG (1)
- Bernardo (21)
- BERTHIEZ (3)
- BIGLIA (18)
- BISON (1)
- Blansko (2)
- BOEHRINGER (19)
- BOEHRINGER-VDF (1)
- BOLEY (4)
- BRAUN ZERBST (1)
- BRIGDEPORT (1)
- BRINKMANN (2)
- BUFFALO CHALLENGER (1)
- BULLARD (2)
- BULMAG (1)
- Bulmak (2)
- BÖHRINGER (3)
- CAORLE (1)
- CARNAGHI (1)
- CARNAGHI PIETRO (1)
- CAZENEUVE (30)
- CAZENUEVE (1)
- Celoria (2)
- CERUTI (1)
- CHALLENGER (3)
- Chevalier (2)
- CHIAH CHYUN (1)
- CHIAH CHYUN MUELLER (1)
- CHIRON (1)
- CHUN ZU (1)
- CITIZEN (20)
- CKD (1)
- CKD BLANSKO (2)
- CKD-BLANSKO (2)
- CLOVIS (1)
- CMT (3)
- CMT MASCHINENBAU (1)
- CMZ (6)
- Colchester (37)
- COLCHESTER 600 (1)
- COLCHESTER HARRISON (1)
- COLOMBO (2)
- COMEC (1)
- CONTUR (1)
- CORMAK (1)
- CRAWFORD SWIFT (2)
- CS (1)
- CZ.TECH (1)
- D (1)
- DAEWOO (7)
- DAEWOO (DOOSAN) (2)
- DAINICHI (1)
- DEMOOR (2)
- DIEDESHEIM (1)
- DINN SPINNING LATHE (1)
- DIVERS (1)
- DMG (20)
- DMG GILDEMEISTER (21)
- DMG GILDEMISTER (1)
- DMG MORI (56)
- DMG MORI SEIKI (1)
- DMG MORI SEKI (1)
- DMG MORI WASINO (1)
- DMG-MORI (1)
- DMT (2)
- DMT / KERN (1)
- DMT KERN (1)
- DMTG (1)
- DN SOLUTIONS (8)
- Doerries Scharmann (2)
- DOOSAN (59)
- DOOSAN DAEWOO (5)
- DOOSAN PUMA (2)
- DOOSAN, MIRCRO, ETC. (1)
- DOOSAN-PUMA (1)
- DORMAC (1)
- DORRIES (1)
- DORRIES. (1)
- DREHMA (1)
- DS DORRIES SCHARMANN (1)
- DUGARD (1)
- DÖRRIES (10)
- DÖRRIES SCHARMANN (1)
- DÖRRIES-SCHARMANN (1)
- E/D/E, WUPPERTAL (1)
- EBOSA (2)
- ... más
La indicación de distancia no es posible porque no se pudo determinar su ubicación. El requisito previo es que su navegador permita las cookies y la determinación de la ubicación.
subcategorías
(el tercer nivel de categoría)
Lunetas 16
Otros tornos 19
Tornos 109
Tornos CNC 568
más 1457
Fabricante:
(Categoría: 102)
abb 3
ACCUWAY 4
AJAX 1
ARAD 1
AVIA 1
BAUER 2
BERG 1
Bernardo 21
BERTHIEZ 3
BIGLIA 18
BISON 1
Blansko 2
BOEHRINGER 19
BOLEY 4
BULLARD 2
BULMAG 1
Bulmak 2
CAORLE 1
CARNAGHI 1
CAZENEUVE 30
Celoria 2
CERUTI 1
CHIRON 1
CHUN ZU 1
CITIZEN 20
CKD 1
CLOVIS 1
CMT 3
CMZ 6
Colchester 37
COLOMBO 2
COMEC 1
CONTUR 1
CORMAK 1
CS 1
CZ.TECH 1
D 1
DAEWOO 7
DAINICHI 1
DEMOOR 2
DIVERS 1
DMG 20
DMG MORI 56
DMG-MORI 1
DMT 2
DMT KERN 1
DMTG 1
DOOSAN 59
DORMAC 1
DORRIES 1
DORRIES. 1
DREHMA 1
DUGARD 1
DÖRRIES 10
EBOSA 2
ECHEA 1
ECOCA 1
EGURO 1
ELMAG 8
EMAG 34
Emco 43
Ergomat 5
ESCO 1
EUBAMA 1
EXCELLO 1
FALCON 1
FAMAR 5
FANUC 2
FARREL 1
FAT 3
FEELER 2
Feinbau 3
FMB 1
Forkardt 2
FORMAT 1
FREMTAS 1
FRORIEP 2
GALLIC 1
GDW 4
GEMA 2
GEMINIS 12
Gildemeister 130
Goodway 7
Graziano 3
GURUPTZE 1
GURUTZPE 9
Guss 2
GWM-TECH 2
HAAS 32
HANKOOK 4
HANWHA 8
HAPREMEC 1
HARDINGE 11
HARDINGS 1
Harrison 7
HBM 9
HEID 1
HERKULES 2
HESSAPP 3
HITACHI 1
HNK 1
HOESCH 1
HOFFMAN 1
HUNGER 1
HURCO 9
HUVEMA 10
HWACHEON 10
Hyundai 20
HYUNDAI WIA 10
ICOCA 1
IEMCA 2
IMT 1
INDEX 82
INNSE 2
IRLE 1
JENN-WEI 1
JESSEY 6
JMTCL 1
JOHNFORD 4
KAMI 5
KEKEISEN 1
Kern 6
KERN-DMT 1
KIA 1
Kitagawa 2
KITAMURA 1
KLAASSEN 1
Klaaßen 3
Klopfer 2
KME 1
KMT 1
KNUTH 8
KOLOMNA 9
Kovosvit 4
LABOR 2
LACFER 2
LATHES 1
LEADWELL 5
LEALDE 1
LEIFELD 1
Leinen 2
LIEBER 1
LORCH 1
LÖW 2
M+M 1
MACMATIC 1
MAIER 2
MAMMUT 1
MANURHIN 5
MARTIN 8
MAS 11
MATEC 1
MATRA 5
Mazak 125
MCM 4
MERLI 1
METOSA 1
MEUSER 15
MEXPOL 4
MFD 2
MICROCUT 2
MIOTAL 4
MISAL 1
MIYANO 10
MNT 1
MONDIALE 10
MONFORTS 25
distribuidor
autorizado
autorizado
Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 165 mm -Rezess recording: Ø 125 mm -Hole circle: 140 mm (3x M10) -Inner diameter: 40 mm -Speed: max. 4000 rpm -Weight: 12 kg
distribuidor
autorizado
autorizado
Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier-Tool carriage: support carriage support carrier-Tool holder: Ø 32 mm-Dimensions: see photos-Dimensions: 460/190/H205 mm-Weight: 21.6 kg
distribuidor
autorizado
autorizado
chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck faceplate-Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate-Outside: Ø 203 mm-Mount: M70 x 6.5-Hole circle: Ø150 mm / M12 / Ø126/17 mm-Dimensions total Ø 203 x 60 mm-Weight: 6.4 kg
distribuidor
autorizado
autorizado
Three-jaw chucks, three-jaw lathe chucks, power chucks-Chuck size: Ø 250 mm-Short taper mount for: bayonet mount, taper size 8-Weight: 41 kg
distribuidor
autorizado
autorizado
Chuck flange, flange mount, chuck flange, drive flange, intermediate flange, chuck faceplate -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 200 mm -Bolt circle: Ø134 mm -Socket: Short cone 6, cone Ø 101 - 106 mm -Overall dimensions: Ø 200 x 145 mm -Weight: 7.6 kg
distribuidor
autorizado
autorizado
chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck faceplate-Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate-Outside: Ø 250 mm-Inside: Ø 100 mm-Hole circle: Ø180 mm/ M10 / Ø230/10 mm-Dimensions total Ø 250 x 23 mm-Weight: 6.1 kg
distribuidor
autorizado
autorizado
chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck faceplate-Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate-Outside: Ø 292 mm-Inside: Ø 22 mm-Hole circle: Ø212/10 mm / Ø108/11 mm-Dimensions total Ø 292 x 23 mm-Weight: 8.2 kg
distribuidor
autorizado
autorizado
Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier, slide guide-Tool slide: Support slide lower part support carrier-Dovetail: 90 to 73 mm 12 mm high-Dimensions: see photos-Quantity: 5x bottoms available-Price: per piece-Dimensions: 210/180/H25 mm-Weight: 4 kg/piece
distribuidor
autorizado
autorizado
Heavy-duty lathe, turning machine, lathe, center lathe, center lathe -Manufacturer: VDF Heidenreich & Harbeck, Leadscrew and Feedscrew Lathe Type V3 -Machine bed: hardened -Turning length: 1700 mm -Turning Ø over bed: 500 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 57 mm -Spindle speeds: 19 - 2000 rpm -Wedge bar chuck: Forkardt Ø 250 mm -Tailstock mount: MK4 -Bezel: 150 mm -Drive: 7.5 kW -Accessories: Keyless collet, tool holder, tools see photos -Dimensions: 1440/3370/H1515 mm -Weight: 2510 kg
distribuidor
autorizado
autorizado
chuck flange, flange holder, lathe chuck flange, driving flange, lathe chuck faceplate-Manufacturer: Röhm, chuck flange for three-jaw chuck, four-jaw chuck, faceplate-Type: 55021/22-6 Ø 220 mm-Bolt circle: Ø 134 mm-Hole: Short taper 6, cone Ø 103 - 106 mm-Dimensions total Ø 220 x 190 mm-Weight: 20.1 kg
distribuidor
autorizado
autorizado
Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier-Tool carriage: support carriage support carrier-Support plate: 265 x 180 mm-Dimensions: see photos-Dimensions: 290/280/H70 mm-Weight: 21.1 kg
distribuidor
autorizado
autorizado
Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Condition of machine bed: very good -Machine bed: hardened -Manufacturer: Martin, lead screw and feed screw lathe type DLZ 502 -Turning length: 2200 mm -Turning diameter over bed: 580 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 65 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 320 mm -Tailstock mount: MK5 -Drive: 7.5 kW -Accessories: 4x bezels, tool holder, tools (see photos) -Dimensions: 1260/3720/H1260 mm -Weight: 2510 kg
distribuidor
autorizado
autorizado
Wedge rod feed, swivel feed, swivel swivel feed, power clamp feed-Feed size: Ø 250 mm-Weight: 35.5 kg
distribuidor
autorizado
autorizado
Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 130 mm -Bolt circle: Ø 75 mm -Hole: short cone 3, cone Ø 51 - 53 mm -Dimensions total Ø 130 x 50 mm -Weight: 1.4 kg
distribuidor
autorizado
autorizado
Upper support, upper slide, dovetail guide, tool slide, cross table-Tool slide: from automatic lathe SUGA type STS-2-Measurements: see photos-Dimensions: 1080/530/H290 mm-Weight: 121 kg
distribuidor
autorizado
autorizado
Upper support, upper slide, dovetail guide-Rezess: Ø mm-Hole circle: Ø mm-Dimensions: 121/295/H200 mm-Weight: 12 kg
distribuidor
autorizado
autorizado
tool changer for lathe, tool disc turret, turret system, disc turret for lathe -Manufacturer: Sauter, tool changer type 0.5.675.112 from vertical lathe Scherer VDZ 80 DS -Tool turret: Type 0.5.901.012 for max. 12 tools -Servo motor: Siemens type 1FK7063-2AC74-1SB0 -Individual components: see photos -Dimensions: 560/450/H300 mm -Weight: 117 kg
distribuidor
autorizado
autorizado
Tool changer for lathe, tool disc turret, turret system, disc turret for lathe -Manufacturer: Swedturn, Type ST12 CNC 300 tool changer -Tool turret: for max. 12 tools -Tool holder: Ø 60 mm -Individual components: see photos -Dimensions: 565/470/H565 mm -Weight: 319 kg
distribuidor
autorizado
autorizado
Chuck flange, flange mount, lathe chuck flange, driving flange-Chuck flange: for three-jaw chucks, four-jaw chucks, face plates-Outer: Ø 220 mm-Inside: Ø 100 mm-Dimension: Ø 220 x 70 mm-Weight: 6.1 kg
distribuidor
autorizado
autorizado
Three-jaw chuck, three-jaw lathe chuck-Chuck size: Ø 165 mm-Passage: Ø 47 mm-Weight: 7 kg
distribuidor
autorizado
autorizado
Chuck flange, flange mount, lathe chuck flange, driving flange, lathe chuck face plate, chuck flange for power chucks-Manufacturer: Röhm, chuck flange for power chucks, three-jaw chucks, four-jaw chucks, faceplate-Type: 55021/22-6 Ø 210 mm-Bolt circle: Ø 133 mm-Dimensions total Ø 210 x 170 mm-Weight: 12.4 kg
distribuidor
autorizado
autorizado
Chuck flange, flange mount, lathe chuck flange, driving flange-Chuck flange: for three-jaw chucks, four-jaw chucks, face plates-Outer: Ø 210 mm-Inside: Ø 76 mm-Take: short taper 6, cone Ø 105 mm-Dimension: Ø 210 x 65 mm-Weight: 3.5 kg
distribuidor
autorizado
autorizado
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø 127 mm-Mounting: Hole shaft cone Ø 30-39 mm-Type designation: not available-Dimensions total Ø 180 x 75 mm-Weight: 5.9 kg
distribuidor
autorizado
autorizado
Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe-Manufacturer: WMW, automatic lathe type DRT 50m-Turning length: 550 mm-Turning Ø over bed: 530 mm-Spindle bore: Ø 63 mm-Spindle speeds: 9 - 450 rpm-Three jaw chuck: Ø 200 mm-Turret: with accessories, see photos-Drive motor: 5.3 / 6.8 kW-Dimensions: 2420/1040 / H1460 mm-Weight: 2200 kg
distribuidor
autorizado
autorizado
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø 127 mm-Mounting: Hole shaft cone Ø 50-60 mm-Type designation: not available-Dimensions total Ø 180 x 90 mm-Weight: 8 kg
distribuidor
autorizado
autorizado
Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 300 mm -Reference: Short cone 8 (139.8 mm) -Dimensions: Ø 300 x 100 mm -Weight: 14 kg
distribuidor
autorizado
autorizado
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: holder Ø 213 mm-Mounting: Hole shaft cone Ø 56-59 mm-Type designation: not available-Dimensions total Ø 260 x 120 mm-Weight: 14.3 kg
distribuidor
autorizado
autorizado
spindle head for lathe, lathe spindle head, lathe spindle head-Manufacturer: Scherer, spindle head from vertical lathe VDZ 80-Clamping head: Hainbuch SK80BZIG SP.0219.0034.00-Clamping device: SMW Autoblok Cil.85 SIN-S no-cc-Individual components: see photos-Price/Delivery: complete-Dimensions: 1350/560/H495 mm-Weight: 330 kg
distribuidor
autorizado
autorizado
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø 127 mm-Mounting: Hole shaft cone Ø 49-64 mm-Type designation: not available-Dimensions total Ø 210 x 125 mm-Weight: 10.9 kg
distribuidor
autorizado
autorizado
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: holder Ø 163 mm-Mounting: Hole shaft cone Ø 44-54 mm-Type designation: not available-Dimensions total Ø 220 x 85 mm-Weight: 8 kg
Usted no ha encontrado su máquina deseada?
enviar consulta
a todos los distribuidores (no hay registro necesario)
