tornos usadas para la venta (3,123)

turning diameter over bed: 400 mmturning diameter over slide rest: 264 mmturning length: 1000 mmturning diameter in the gap: 550 mmturning speeds: 44 - 2000 U/mincentre height: 200 mmspindle bore: 52 mmtailstock quill taper MT: 4 MKconnected load frequency: 400 Vtotal power requirement: 1,5 / 2,4 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,9 x 0,8 x 1,56 m3-axis digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 320mmbezel fixedrunning bezel4-fold steel holder.Halogen machine lightmachine lightfoot brakeremovable chip tray, chip protection wallHardened and ground bed tracksComplete coolant systemlining protectionmachine toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Con dos módulos de mecanizado, eje X: -50 a 725 mm, eje Y: -200 a 300 / -250 a 250 mm, eje X-, Y, Z de recorrido rápido: 18/12/30 m/min, longitudes de torneado: 1500/2000/2500/3200/4000/4500/6500 mm, diámetro de giro: 780/ 880 mm, diámetro del husillo de torneado: 92/123 mm, rango de velocidad del husillo principal: 0-3000/0-3000/2000/min, máx. Velocidad de la unidad de torneado/fresado: 5000/6000/10000/min, longitud máx. de la herramienta: 900/600/1000/300/900 mm, carrera de la pluma: 160/170 mm, carga conectada: 102 kVA, sistema de control: SINUMERIK ONE / SINUMERIK 840D sl, control del sistema de accionamiento: SINAMICS S120, peso: 17 t. Es posible la inspección in situ.

Está disponible un torno paralelo de precisión CNC Pinacho. Altura del centro: 180 mm, ancho del centro: 750 mm-1000 mm, diámetro de giro sobre la cama guía / deslizamiento longitudinal / deslizamiento transversal: 360 mm / 335 mm / 198 mm, ancho de la cama: 250 mm, orificio: 42 mm, velocidad: 4000 rpm, alimentación X / Z: 10 m / min, desplazamiento rápido X / Z: 10 m / min. Diámetro del vástago del contrapunto: 58 mm, longitud del vástago del contrapunto: 200 mm, cono Morse: MK3, recorrido mínimo de la luneta móvil/fija: 10 mm, recorrido máximo de la luneta móvil/fija: 70 mm/114 mm, control: Fanuc 0i. Documentación disponible. Posibilidad de inspección in situ

Diámetro de giro sobre la bancada / corredera frontal: 360 mm / 160 mm, distancia entre ejes: 800 mm, recorrido X / Z: 205 mm / 810 mm, velocidad: 3150 rpm, diámetro del husillo: 60 mm, posiciones de la herramienta: 8, desplazamiento rápido X / Z: 10 m / min. Dimensiones de la máquina X/Y/Z: aprox. 3300 mm/1800 mm/1800 mm, peso: aprox. 3300 kg, control: Traub System TX-8. Es posible una inspección in situ.

turning diameter over bed: 250 mmturning diameter over slide rest: 145 mmturning length: 550 mmcenter height over bed: 125 mmcentre distance: 550 mmbed width: 135 mmspindle bore: 26 mmturning speed range - stepless: 50 - 2.000 U/minpower requirement: 750 W3-jaw-chuck diameter: 125 mmtaper in tailstock-quill: MK 2 dia. of quill: 30 mmquill stroke: 70 mmvoltage: 230 Vweight of the machine ca.: 120 kgdimensions of the machine ca.: 1,25 x 0,60 x 0,50 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpice diameter max.: 90 mmforward bearing diameter: 140 mmTurning speeds mainspindle: 4.200 U/minPower: 35,5 KWControl: INDEX C 200-4 travel -x axis: 1.500 mmtravel -z axis: 340 mmtravel -y axis: 180 mmb-axis: 360 °CNC turning and milling center vertical | INDEX - V300 equipped with a turret for driven tools as well as y- + B- axis.Further information:- direct measuring system on X + ZThe machine is in good condition.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: V-300 | V 300The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm: 240 mm: 1250 mm: 190 mm: 54 mm: 5,5 kW

Circulation/rotation Ø over bed: 475 mmRotation/rotation Ø via cross slide: 260 mmSledge path plan: 260 mmcentre distance: 1000 / 1500 / 2000 mmpower capacity: 22 kWGear stages. m= manual / e= electric.: 2 e Spindle head DIN 55026 / DIN 55027: A6 / 6 Spindle Ø in front bearing: 115 mmspindle bore: 78 / 70 mmturning speed range (V-constant): 1 - 3.000 U/minfeed range flat: 1µ - 1.000 mm/Ufeed range lengthwise and thread: 1µ - 2.000 mm/URapid traverse plan/longitudinal: 5 / 10 m/mindiameter of quill: 70 mmquill travel: 120 mmquill inner cone: 5 MKThis machine is used for the production of individual parts and small batches from simple to the most complex contours.It is characterised by:--> Ease of operation Precision Working range

: 0400 mm: 1250 mm: : 200 mm: 80 mm: 315 mm: 2700 U/min : D1-8 DIN 55029 : 73 mm: 140 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 15.666h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Altura del centro: 102 mmDistancia entre ejes: 450 mmDiámetro del husillo: 25 mmVelocidad del husillo: 220 - 2600 Peso de la máquina aprox.: TDimensiones de la máquina aprox.: MNo se ha comprobado que losaccesorios estén completos Los armarios no están incluidos en el volumen de suministro

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 6.944h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.The machine video from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 15.650h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mmturning diameter over slide rest: 280 mmturning length: 1000 mmturning diameter in the gap: mmturning speeds: 70 - 2000 U/mincentre height: 195 mmspindle bore: 54 mmtailstock quill taper MT: 3 MKconnected load frequency: 400 Vtotal power requirement: 2,2 kWweight of the machine ca.: 0.85 tdimensions of the machine ca.: 1,95 x 1,0 x 1,75 mProfessional industrial machine3-axis digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 280mmBezel fixedBezel rotating4-fold steel holder.Halogen machine lightMachine lightFoot brakeremovable chip tray, chip protection wallHardened and ground bed railsComplete coolant systemFeed protectionMachine feetMachine toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mmturning diameter over slide rest: 140 mmturning length: 550 mmturning speeds: 50 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKtailstock quill stroke: 65 mmconnected load frequency: 230 Vtotal power requirement: 1,1 kWweight of the machine ca.: 0,15 tdimensions of the machine ca.: 1,3 x 0,6 x 0,65 mBenchtop lathe 3-axis LCD digital display system fully assembled.Longitudinal feed.3-jaw chuck 125 mm.4-jaw chuck 125 mm.Clamping plate.4-way steel holder.Clock for thread cutting.Drip trayHardened bed tracks.Emergency stop switch.Forage protectionSet of wheels.Appropriate tools.Base cabinet is optionalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mmturning diameter over slide rest: 130 mmturning length: 550 mmturning speeds: 50 - 2000 U/mincentre height: 125 mmspindle bore: 20 mmtailstock quill taper MT: 2 tailstock quill stroke: 60 mmmetric threading: 0,4 - 3,0 mmthread - inch: 10 - 44 TPIthread - module: 0,2 - 12,5 mmconnected load frequency: 230 Vtotal power requirement: 1,0 kWweight of the machine ca.: 0,12 tdimensions of the machine ca.: 1,09 x 0,59 x 0,45 mEquipped with- 20 mm spindle passage- adjustable guideways- Powerful 1.0 kW motor- continuously variable speedScope of delivery:- 3-jaw chuck 100 mm,- 4-jaw faceplate chuck 125mm- standing and rotating bezel- Splash guard- Feed protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 25-90 mmthreading length: 3000 mmthread pitch: 2-16 mmtotal power requirement: 25 kWweight of the machine ca.: 10,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 250 mmturning length: 100 mmcontrol: SIEMENS 840 D total power requirement: 35 kWweight of the machine ca.: 7500 kgdimensions of the machine ca.: mE M A G (Germany)Vertical CNC Controlled Hard Turning and Grinding machinewith tool turret and workpiece handling SystemModel VSC 250 DS Year 2004 # M7 28.69324_______________________________________________________Turning Ø, max. 250 mmTurning length internal / external 100 mmWorkpiece length min./max. 29 – 100 mm6-positon tool turret Ø / swing-Ø 480/790 mmWorkpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mmFeed rate / Quick feed X/Z 45/30 m/min.Feed force X/Z  ...

turning diameter: 400 mmturning length: 915 mmcontrol: NUM Type 1062 T total power requirement: 12,5 kWweight of the machine ca.: 5500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mmturning length: 710 mmcontrol: SIEMENS SINUMERIC 840 total power requirement: 40 kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: mI N D E X (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstockand INDEX CNC Control C 200 – 4 (SIEMENS)Model G 300 Year 1995 S/N 5000 65_____________________________________________________________Turning - Ø, with chuck, max. 300 mmSpindle bore 90 mmMax. Workpiece Swing dia. 400 / 590 mm Turning length / travel of turning slide, (X-Achse) max. 710 mmTurret head slide cross movement (Z-Axis) max. 140 mmTurret with 12 tool holder positions DIN 30 mmFeed range of turret slide /  ...

turning diameter: 150 mmturning length: 500 mmcontrol: total power requirement: 4 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 200 mmturning length: 400 mmcontrol: SIEMENS SINUMERIC 840 C total power requirement: 40 kWweight of the machine ca.: 6.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mmturning diameter over slide rest: 140 mmturning length: 550 mmturning speeds: 125 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKtailstock quill stroke: 65 mmconnected load frequency: 230 Vtotal power requirement: 0,75 kWweight of the machine ca.: 0,135 tdimensions of the machine ca.: 1,25 x 0,6 x 0,6 mSpeed in 6 levels 125 - 2000rpm.3-jaw chuck 125 mm.4-jaw chuck 125 mm. (Independent)Fixed bezel.Revolving bezel.4-fold steel holder.chip tray.back panel.spindle protection.Hardened bed rails.Longitudinal feed with left / right switching.Set of change gears.Associated Tools.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 320 mmturning diameter over slide rest: 200 mmturning length: 900 mmturning diameter in the gap: 320 mmturning speeds: 75 - 2000 U/mincentre height: 160 mmspindle bore: 38 mmtailstock quill taper MT: 3 connected load frequency: 400 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,6 x 0,75 x 1,7 mSINO digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 250mmbezel fixedQuick-change steel holder with 4 pcs. steel holdermachine lightChip tray, chip protection wallHardened and ground bed trackslining protectionmachine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Estamos vendiendo un centro de torneado Haas ST-20 en nombre de un cliente. La máquina se instaló y nunca se utilizó de manera productiva., - Opciones de control, - paquete de opciones, - flujo de refrigerante a alta presión, - paquete de accesorios

Diámetro de giro: 60 mmLongitud de giro: 200 mmNúmero de correderas: Potencia total Requisito: 20 kWPeso de la máquina aprox.: TDimensiones de la máquina aprox.: M

turning diameter: 1250 mmswing diameter: 1160 mmturning height: 800 mmfaceplate diameter: 1000 mmtotal power requirement: 97 kWweight of the machine ca.: 25000 tdimensions of the machine ca.: mP I T T L E R (Germany)CNC Controlled Vertical Turning and Milling CentreWith Tool Changer and Pallet ChangerModel PV 1250 / 1-1 Year 1994 _______________________________________________________Turning Ø max. 1,000 mmSwing Ø max. 1,160 mmTurning length 800 mmX Axis - horizontal 1,300 mmY Axis - vertical 800 mmFeed / quick feed 16,000 mm/minMain spindle speeds 10 - 1,000 rpm !Main spindle speeds via separate C Axis 0.1 - 16 rpmPositioning accuracy of C Axis 360° + / - 5 Tool holder ISO 50Tool drive 22 kWMax. torque / spindle speed 315 Nm / 2,500 rpmPallet size 630 x 630 mmSpindle drive  ...

swing diameter: 640 mmmax. turning passage: 640 mmcontrol: Simens 840 D Powerline - - - - - Main spindle - - - - -: - - - - - -bar material dia.: 65 mmchuck diameter: 200 - 315 mmspindle bore diameter: 80 mmdiam. of main spindle in forward position: 120 mm--- Subspindle ---: - - - - - -bar material dia.: 65 mmchuck diameter: 315 mmspindle bore diameter: 80 mmforward bearing diameter: 120 mm- - - - - General data - - - - -: - - - - - -spindle distance: 1.500 mmturning length: 1.185 mmMain-/Counter -spindle turning speeds: 5.000 U/mindriven tools turning speeds: 12.000 U/minSlide cross: X1, Y1: 550 / 180 mmSlide cross: Z1: 1.185 mmSlide cross: B1: 240 °Slide cross: X2: 180 mmSlide cross: Z2: 1.050 mmSlide cross: Z3: 1.150 mmCNC Turning- and Milling Center | DMG GILDEMEISTER - GMX 250 linear equipped with main/counter spindle, chip conveyor, tool changer, a turret for driven tools and and  ...

diámetro de giro: 530 mm0: 620 mmAncho de la rueda: 20 mmdiámetro del rollo: 45 mmrequisito de potencia total: ohne kWpeso: 250 kgdimensiones de la máquina aprox.: 1,2 x 0,30 x 1,3 m

turning diameter over bed: 250 mmturning diameter over slide rest: . mmcentre distance: ca. 400 mmcentre height: ca. 125 mmturning speed range: 80 - 3000 U/minnumber of speeds: 18 spindle bore: 24 mmtailstock quill taper MT: 3 weight: ca. 400 kgdimensions: ca. 1200 x 650 x 1300 mm4-jaw-chuck diameter: 125 mmincluding Röhm four-jaw chuck, Ø 125 mm incl. drilling and turning jaws,collet chuck device incl. collets 1-20 mm (exept 5 and 10 mm) with 1 mm gradientMultifix size A with 3 interchangeable holders,chuck protection with shutdownThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.