[ perfil de distribuidor ]
We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Cepilladoras de cuatro lados WEINIG Powermat 600 Compact
máquinas para el procesado de madera / cepilladoras / Cepilladoras de cuatro lados
Number of spindles: 5 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 5-30 m/min.Control: Memory-Funktion Weinig Powermat 600 Compact----------------------------------------------------------------------The machine has been cleaned and ...
Fabricante: WEINIG
Modelo:Powermat 600 Compact
Tipo de máquina: Cepilladoras de cuatro lados
Número de artículo: 170121942
Cantidad: 1
Fecha: 15.10.2026
Año de fabricación: 2014
Ubicación: Oberkochen
Precio: 55,000 EUR
Máquina en stock:Sí
Seller-item-No.:1305-2798
Number of spindles: 5 St.
Working width: 230 mm
Working height: 120 mm
Length of the planing table: 2500 mm
Feed motor: 4 kW
Feed speed: 5-30 m/min.
Control: Memory-Funktion
Weinig Powermat 600 Compact
----------------------------------------------------- -----------------
The machine has been cleaned and fully inspected.
Brief Summary:
----------------------------------
- 5 Spindles
- Powerful Motors
- Left and top spindles controlled for width and height
Detailed Description:
------------------------------------------------ -----------------------
Technical Data:
Working Width: 20-230 mm
Working Height: 10-120 mm
Number of Spindles: 5
1st Spindle - Bottom
-----------------------------------------------
Motor with brake: 7.5 kW
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool Circle: 125-145 mm
Tool Circle for Rebating Cutter: 130-160 mm
Axially Travel: 5 mm
Rebating Device
MarathonCoatine for table insert in front of the 1st lower tool holder
Electronic digital display for rotary adjustment
2nd Spindle - Right
-----------------------------------------------
Mot or with brake: 11.0 kW
Shared motor with left-hand tool holder
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool swing diameter 40 mm below table level: 93 - 200 mm
Tool swing diameter 55 mm below table level: 93 - 180 mm
Tool swing diameter for straight cutter heads max. 163 mm
Max. tool diameter behind fence: 180 mm
Max. groove depth: 35 mm
Axially travel: 55 mm
3rd Spindle - Left
-----------------------------------------------
Motor with brake: Shared motor with the 2nd spindle
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool swing diameter 40 mm below table level: 93 - 200 mm
Tool swing diameter 55 mm below table level: 93 - 180 mm
Tool swing diameter for straight cutter heads max. 163 mm
Max. groove depth: 35 mm
Axially travel: 55 mm
CNC-controlled radial spindle
4th spindle - top
----------------------------------------------
Motor with brake: 11.0 kW
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool swing diameter: 93 - 200 mm
Tool swing diameter for straight cutter heads max.: 180 mm
Max. groove depth: 35 mm
Axially travel: 40 mm
CNC-controlled radial spindle
Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded.
Pressure shoe in front of, and discharge after, the upper spindle with electronic
digital displays, integrated into the memory function or the PowerCom
5. Spindle - bottom
-----------------------------------------------
Mo tor with brake: 7.5 kW
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool travel: 93 - 200 mm
Max. throat depth: 15 mm
Axially travel: 35 mm
Feed system
-----------------------------------------------
Electro nic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min
Infeed roller in front of the first lower tool, pneumatically controlled up/down.
Durofer pointed tooth rollers with depth limiter and self-cleaning.
Adjustment travel of the feed rollers relative to the left tool holder, axial 35 mm
Machine electrical system
-----------------------------------------------
Op erating voltage 400 V (voltage range 380–420 V), 50 Hz.
All spindles IE2 design.
Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC 204-1. Other electrical regulations are not considered.
Machine stand, tables, and stops
-----------------------------------------------
Infeed table: 2500 mm long (including jointing guide)
Manual lubricant pump for table degreasing
One driven rubber roller in the outfeed table - 50 mm wide
Pressure elements and guides
-----------------------------------------------
One lateral pressure roller in front of the left tool holder, rotating and spring-loaded.
Machine operation
-----------------------------------------------
Cont rol: MemoryPlus
For saving profile settings.
Spindle axes with electronic dual displays.
Graphical display enables intuitive operation
2 x radial CNC-controlled spindle adjustment and positioning
in conjunction with the memory function for spindles 3 and 4
CNC-controlled feed adjustment and positioning
up/down in conjunction with the memory function
Lubrication points for the axial tool holder adjustment.
Central location of lubrication points on the front of the machine.
Safety and noise reduction
-----------------------------------------------
Full safety enclosure
Option:
4 smooth planing tools as included:
Spindle 1: 230 mm planer head, 4 teeth + surface cutter
Spindle 2: 120 mm planer head, 4 teeth
Spindle 3: 120 mm planer head, 4 teeth
Spindle 4: 230 mm planer head, 4 teeth
(Technical specifications according to the manufacturer - without guarantee!)Weinig Powermat 600 Compact
----------------------------------
The machine will be cleaned and completely checked before delivery.
Brief Summary:
----------------------------------
- 5 spindles
- Powerful motors
- Left and upper spindles controlled for width and height
Detailed Description:
----------------------------------
Technical Specifications:
Working width: 20-230 mm
Working height: 10-120 mm
Number of spindles: 5
1st spindle - bottom
----------------------------------
Motor with brake: 7.5 kW
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool travel radius: 125-145 mm
Tool travel radius for rebate cutter: 130-160 mm
Axis adjustment range: 5 mm
Rebate device
MarathonCoatin for table insert in front of the 1st lower tool holder
Electronic digital display for wheel adjustment
2nd spindle - Right
----------------------------------
Motor with brake: 11.0 kW
Shared motor with left-hand tool holder
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool cutting radius 40 mm below table level: 93 - 200 mm
Tool cutting radius 55 mm below table level: 93 - 180 mm
Tool cutting radius for straight cutter heads max. 163 mm
Max. tool diameter behind stop level: 180 mm
Max. throat depth: 35 mm
Axis adjustment range: 55 mm
3rd spindle - left
----------------------------------
Motor with brake: Shared motor with the 2nd spindle
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool cutting radius 40 mm below table level: 93 - 200 mm
Tool cutting radius 55 mm below table level: 93 - 180 mm
Tool cutting circle for straight cutter heads max. 163 mm
Max. throat depth: 35 mm
Axial adjustment range: 55 mm
Radial CNC-controlled spindle
4th spindle - top
----------------------------------
Motor with brake: 11.0 kW
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool cutting circle: 93 - 200 mm
Tool cutting circle for straight cutter heads max.: 180 mm
Max. throat depth: 35 mm
Axial adjustment range: 40 mm
Radial CNC-controlled spindle
Split pressure shoe in front of the upper tool holder, adjustable to the
tool cutting circle and pivoting away from the tool, spring-loaded.
Pressure shoe before and discharge after the upper spindle with
electronic digital displays, integrated into the memory function.
5th spindle - lower
----------------------------------------------
Motor with brake: 7.5 kW
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool cutting radius: 93 - 200 mm
Max. groove depth: 15 mm
Axis adjustment range: 35 mm
Feed system
-----------------------------------------------
Electro nic feed, continuously adjustable with brake: 4 kW, 5 - 30 m/min
Feed roller in front of the first lower tool, pneumatically controlled up/down.
Durofer pointed tooth rollers with depth gauge and self-cleaning.
Adjustment range of the feed rollers relative to the left tool holder,
axial: 35 mm
Machine electrical system
----------------------------------------------
Operatin g voltage 400 V (voltage range 380 - 420 V), 50 Hz.
All spindles are IE 2 version.
Electrical design according to DIN VDE 0113, electrical equipment for
industrial machines EN60204, IEC-204-1. Other electrical regulations are
not taken into account.
Machine stands, tables, and stops
-----------------------------------------------
Surface table: 2500 mm long (including jointing ruler)
Manual lubricant pump for resin removal
One driven rubber roller in the outfeed table - 50 mm wide
Pressure elements and guides
-----------------------------------------------
One lateral pressure roller in front of the left tool holder, revolving and
spring-loaded.
Machine operation
-----------------------------------------------
Cont rol system: MemoryPlus
For saving profile settings.
Spindle axes with electronic dual displays.
Graphic display enables intuitive operation
2 x radial CNC-controlled spindle adjustment and positioning
in conjunction with the memory function for spindles 3 and 4
CNC-controlled adjustment and positioning of the feed (up/down)
in conjunction with the memory function
Lubrication points for the axial tool holder adjustment.
Centrally located lubrication points on the front of the machine.
Safety and sound insulation
-----------------------------------------------
Ful l safety enclosure
Option:
Used planing tools as available
(Technical specifications according to the manufacturer - without guarantee!)
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 230 mm
Working height: 120 mm
Length of the planing table: 2500 mm
Feed motor: 4 kW
Feed speed: 5-30 m/min.
Control: Memory-Funktion
Weinig Powermat 600 Compact
----------------------------------------------------- -----------------
The machine has been cleaned and fully inspected.
Brief Summary:
----------------------------------
- 5 Spindles
- Powerful Motors
- Left and top spindles controlled for width and height
Detailed Description:
------------------------------------------------ -----------------------
Technical Data:
Working Width: 20-230 mm
Working Height: 10-120 mm
Number of Spindles: 5
1st Spindle - Bottom
-----------------------------------------------
Motor with brake: 7.5 kW
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool Circle: 125-145 mm
Tool Circle for Rebating Cutter: 130-160 mm
Axially Travel: 5 mm
Rebating Device
MarathonCoatine for table insert in front of the 1st lower tool holder
Electronic digital display for rotary adjustment
2nd Spindle - Right
-----------------------------------------------
Mot or with brake: 11.0 kW
Shared motor with left-hand tool holder
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool swing diameter 40 mm below table level: 93 - 200 mm
Tool swing diameter 55 mm below table level: 93 - 180 mm
Tool swing diameter for straight cutter heads max. 163 mm
Max. tool diameter behind fence: 180 mm
Max. groove depth: 35 mm
Axially travel: 55 mm
3rd Spindle - Left
-----------------------------------------------
Motor with brake: Shared motor with the 2nd spindle
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool swing diameter 40 mm below table level: 93 - 200 mm
Tool swing diameter 55 mm below table level: 93 - 180 mm
Tool swing diameter for straight cutter heads max. 163 mm
Max. groove depth: 35 mm
Axially travel: 55 mm
CNC-controlled radial spindle
4th spindle - top
----------------------------------------------
Motor with brake: 11.0 kW
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool swing diameter: 93 - 200 mm
Tool swing diameter for straight cutter heads max.: 180 mm
Max. groove depth: 35 mm
Axially travel: 40 mm
CNC-controlled radial spindle
Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded.
Pressure shoe in front of, and discharge after, the upper spindle with electronic
digital displays, integrated into the memory function or the PowerCom
5. Spindle - bottom
-----------------------------------------------
Mo tor with brake: 7.5 kW
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool travel: 93 - 200 mm
Max. throat depth: 15 mm
Axially travel: 35 mm
Feed system
-----------------------------------------------
Electro nic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min
Infeed roller in front of the first lower tool, pneumatically controlled up/down.
Durofer pointed tooth rollers with depth limiter and self-cleaning.
Adjustment travel of the feed rollers relative to the left tool holder, axial 35 mm
Machine electrical system
-----------------------------------------------
Op erating voltage 400 V (voltage range 380–420 V), 50 Hz.
All spindles IE2 design.
Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC 204-1. Other electrical regulations are not considered.
Machine stand, tables, and stops
-----------------------------------------------
Infeed table: 2500 mm long (including jointing guide)
Manual lubricant pump for table degreasing
One driven rubber roller in the outfeed table - 50 mm wide
Pressure elements and guides
-----------------------------------------------
One lateral pressure roller in front of the left tool holder, rotating and spring-loaded.
Machine operation
-----------------------------------------------
Cont rol: MemoryPlus
For saving profile settings.
Spindle axes with electronic dual displays.
Graphical display enables intuitive operation
2 x radial CNC-controlled spindle adjustment and positioning
in conjunction with the memory function for spindles 3 and 4
CNC-controlled feed adjustment and positioning
up/down in conjunction with the memory function
Lubrication points for the axial tool holder adjustment.
Central location of lubrication points on the front of the machine.
Safety and noise reduction
-----------------------------------------------
Full safety enclosure
Option:
4 smooth planing tools as included:
Spindle 1: 230 mm planer head, 4 teeth + surface cutter
Spindle 2: 120 mm planer head, 4 teeth
Spindle 3: 120 mm planer head, 4 teeth
Spindle 4: 230 mm planer head, 4 teeth
(Technical specifications according to the manufacturer - without guarantee!)Weinig Powermat 600 Compact
----------------------------------
The machine will be cleaned and completely checked before delivery.
Brief Summary:
----------------------------------
- 5 spindles
- Powerful motors
- Left and upper spindles controlled for width and height
Detailed Description:
----------------------------------
Technical Specifications:
Working width: 20-230 mm
Working height: 10-120 mm
Number of spindles: 5
1st spindle - bottom
----------------------------------
Motor with brake: 7.5 kW
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool travel radius: 125-145 mm
Tool travel radius for rebate cutter: 130-160 mm
Axis adjustment range: 5 mm
Rebate device
MarathonCoatin for table insert in front of the 1st lower tool holder
Electronic digital display for wheel adjustment
2nd spindle - Right
----------------------------------
Motor with brake: 11.0 kW
Shared motor with left-hand tool holder
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool cutting radius 40 mm below table level: 93 - 200 mm
Tool cutting radius 55 mm below table level: 93 - 180 mm
Tool cutting radius for straight cutter heads max. 163 mm
Max. tool diameter behind stop level: 180 mm
Max. throat depth: 35 mm
Axis adjustment range: 55 mm
3rd spindle - left
----------------------------------
Motor with brake: Shared motor with the 2nd spindle
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool cutting radius 40 mm below table level: 93 - 200 mm
Tool cutting radius 55 mm below table level: 93 - 180 mm
Tool cutting circle for straight cutter heads max. 163 mm
Max. throat depth: 35 mm
Axial adjustment range: 55 mm
Radial CNC-controlled spindle
4th spindle - top
----------------------------------
Motor with brake: 11.0 kW
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool cutting circle: 93 - 200 mm
Tool cutting circle for straight cutter heads max.: 180 mm
Max. throat depth: 35 mm
Axial adjustment range: 40 mm
Radial CNC-controlled spindle
Split pressure shoe in front of the upper tool holder, adjustable to the
tool cutting circle and pivoting away from the tool, spring-loaded.
Pressure shoe before and discharge after the upper spindle with
electronic digital displays, integrated into the memory function.
5th spindle - lower
----------------------------------------------
Motor with brake: 7.5 kW
Spindle diameter: 40 mm
Speed: 6,000 rpm
Tool cutting radius: 93 - 200 mm
Max. groove depth: 15 mm
Axis adjustment range: 35 mm
Feed system
-----------------------------------------------
Electro nic feed, continuously adjustable with brake: 4 kW, 5 - 30 m/min
Feed roller in front of the first lower tool, pneumatically controlled up/down.
Durofer pointed tooth rollers with depth gauge and self-cleaning.
Adjustment range of the feed rollers relative to the left tool holder,
axial: 35 mm
Machine electrical system
----------------------------------------------
Operatin g voltage 400 V (voltage range 380 - 420 V), 50 Hz.
All spindles are IE 2 version.
Electrical design according to DIN VDE 0113, electrical equipment for
industrial machines EN60204, IEC-204-1. Other electrical regulations are
not taken into account.
Machine stands, tables, and stops
-----------------------------------------------
Surface table: 2500 mm long (including jointing ruler)
Manual lubricant pump for resin removal
One driven rubber roller in the outfeed table - 50 mm wide
Pressure elements and guides
-----------------------------------------------
One lateral pressure roller in front of the left tool holder, revolving and
spring-loaded.
Machine operation
-----------------------------------------------
Cont rol system: MemoryPlus
For saving profile settings.
Spindle axes with electronic dual displays.
Graphic display enables intuitive operation
2 x radial CNC-controlled spindle adjustment and positioning
in conjunction with the memory function for spindles 3 and 4
CNC-controlled adjustment and positioning of the feed (up/down)
in conjunction with the memory function
Lubrication points for the axial tool holder adjustment.
Centrally located lubrication points on the front of the machine.
Safety and sound insulation
-----------------------------------------------
Ful l safety enclosure
Option:
Used planing tools as available
(Technical specifications according to the manufacturer - without guarantee!)
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Al cargar el vídeo se transmitirán datos a YouTube.
Comparte esta máquina en Facebook: