1,725 prensas usadas para la venta

Millutensil BV 30 ERGYear of manuf. : 2022 Control : Siemens Simantic HMI ____________Description:In Generel:Table dimensions:1,500 x 1,000 mmMax. clamping force:500 kNMax. load capacity top plate:2,500 kgMax. load capacity under plate:7,000 kgRG version:plate can be pulled out and tilted:

Dener CNC Abkantpresse Ketzer 30125 XFYear of manuf. : 2022 ____________Description:Technical dataYear of manufacture:2022Pressing force:125tBending length:3050mmNumber of axles:3 (Y1-Y2-X)Total power requirement:11kWOil filling:200lDimensions:3660x1340x2500 mmWeight:approx. 700 kgElectrical system:380 V - 660 V, 50 - 60 Hz, 3 Ph (IE3)Control & operationCNC control unit:Esa S 630 CNC, 10 2D graphic display, touchscreenControl panel:Swivel suspension armSafety PLC:Mcs Plc safety PLCSafety equipmentLaser safety system:Dsp-Ap safety block (manual height adjustment)BackgaugeX-axis:500 mm reachBrake finger for backgauge:standardTool clamping & upper toolClamping upper tool:ManualTools:Included in the scope of deliveryLower die & die holderDie holder:Mechanical European type, standard width (Promecam)Lower die:Eurostamp 2067 / standardOtherCrowning:CNC-motorized crowning (V-axis)Front su ...

Press capacity: 63 ton Throat depth: 360 mm Stroke: 500 mm Daylight: 800 mm Table surface area : 750 x 560 mm Slide area: 630 x 400 Working speed: 60 mm / sec Return speed: 380 mm / sec Electrical connected load: 12,6 kW Dimensions L x W x H: 1.200 x 1.950 x 2.800 mm Weight of machine approx.: 4,3 ton

Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton

Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5

Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7

Press capacity: 125 ton Ram stroke adjustable: 30 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 450 mm Free frontal opening L-R: 1.290 mm Free lateral opening F-B: 450 mm Table surface area : 1.250 x 800 mm Slide area: 1.250 x 650 mm Hole in table: 1.050 x 260 mm Number of strokes: 30 - 220 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 3.800 mm Dimensions L x W x H: 3.500 x 2.200 x 3.800 mm Weight of machine approx.: 21,5 ton

Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton

Press capacity: 35 ton Ram stroke adjustable: 6 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 250 mm Free frontal opening L-R: 430 mm Table surface area : 410 x 410 mm Slide area: 307 x 187 mm Hole in table: 170 x 110 mm Number of strokes: 60 - 300 s.p.m. Weight of machine approx.: 2,4 ton

Freno de prensa CNC Fabricante: Trumpf Tipo: Truma Bend V170 Año de fabricación: 2000 Control CNC: Delem Fuerza de prensa: 170 a Ancho de trabajo: 4 m Coronamiento Ancho de salida 6 ejes Sujeción hidráulica de herramientas Altura: 2,9 m sin herramientas

Máquina de prensa de tornillo usada de Hiller Lutz en muy buen estado. se puede visitar.

Se está vendiendo una prensa excéntrica de Müller. La máquina ha funcionado muy poco y, en consecuencia, está en buen estado. Un contactor está defectuoso y debe ser reemplazado. Como la máquina ya no se usa, el comprador tiene que hacerse cargo. La máquina puede y debe ser vista y probada en el lugar, ya que la garantía o garantía está excluida. El precio es neto más IVA Toda la información sin garantía

Oferta 25494 Características técnicas: - Ancho de trabajo 4100 mm - Capacidad de presión 200 t - Paso entre los postes 3670 mm - Ancho de mesa 200 mm - Proyección 330 mm - Altura de instalación 450 mm - Velocidad de avance 70 mm/seg. - Velocidad de trabajo 7 mm/s. - Velocidad de retracción 80 mm/s. - Carrera del émbolo 250 mm - Rango de ajuste con registros fijos 120 mm - Potencia de 380 V / 25 kW - Requisito de espacio aprox. Ancho 4500 x Alto 2950 x Diámetro 2100 mm - Peso aprox. 16.500 kg - con: - Panel de control de brazo giratorio con control Easybend 2D - T - Mot.Backgauge - Diversas herramientas de flexión - Panel de control, pedal,

Hydraulic press, single column high-speed cycle press, C-pillar press, oil hydraulic press -Pressing force ram: approx. 35 to -Clamping table: 500 x 470 mm -Insertion height: 650 mm -Inlay width: 275 mm -Dimensions: 1300/900/H3200 mm -Machine can be dismantled to: H2700 mm -Weight: approx. 1500 kg

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press, -Safety cage fully closed -pneumatic viewing window with finger protection -Pressure force: 35 tons -Projection: 190 mm -Strokes: 105 strokes/min -Plunger adjustable: 50 mm -Plunger area 250 x 200 mm -Adjustable stroke: 15-70 mm -Table size: 540 x 310 mm -Projection: 180 mm

Características técnicas: Presión: 50 t Longitud de flexión: 2000 mm Equipo: - Ancho de salida - Botón de parada de emergencia - Control de pie

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-slot plate: for milling machines -Width: 500 mm -Length: 500 mm -Height: 87 mm -Plate: is solid -Groove width: 12 mm -Dimensions: see photo technical drawing -Number: 21x clamping plate available -Price: per piece -Dimensions: 500/500/H87 mm -Weight: 91 kg/piece

T-slot plate, measuring plate, measuring table, clamping plate with T slots, plate field, welding table, welding table -Dimensions: 250/1450/H170 mm -Plate thickness: 28 mm -Plate is: with supporting ribs -1x T-slot: 12 mm -1x: Longitudinal groove -Weight: 156 kg

Profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press-Bending/straightening press: hydraulic profile bending machine-Base: solid construction, mobile-Hydraulic unit: unfortunately without type designation-Piston rod: Ø 55 mm / stroke: 200 mm-Individual components: see photos-Total dimensions: 1180/1060/H1000 mm-Weight: 445 kg

Bending tool, die, lower tool, die tool, hemming tool, press tool, forming tool, clamp pressing tool-Die tool: Forming tool / press tool for steel clamps O 270 mm-Tool profile: inside Ø approx. 280 mm-Dimensions lower part: 540/230 / H315 mm / weight 149 kg-Dimensions upper part: 380/210 / H280 mm / weight 83 kg / holder Ø 39 mm / radius 140 mm-Transport dimensions: 540/455 / H230 mm-Weight: 232 kg

Se ofrece una prensa excéntrica / prensa de punzonado, aproximadamente 1992. La visualización es posible mediante cita predeada.

Se ofrece un freno de presión hidráulico de aceite fabricado en 1978, fuerza máxima de presión: 2000 kN, carrera máxima: 250 mm, presión máxima de funcionamiento: 295 bar. Panel de control defectuoso. La visualización es posible mediante cita predeada.

Bending tool, die, lower tool, die tool, hemming tool, press tool, forming tool-Die tool: Forming tool / press tool-Profile: Ø 45 mm-Dimensions: 535/195 / H140 mm-Weight: 35 kg

Profile bending machine, bending machine, flat bar bender, horizontal bending/straightening press -Flat bar bender: hydraulic profile bender -Underframe: on castors, table foldable on both sides -Operating mode: manual and automatic mode -Accessories: see photos -Total dimensions: 2155/1320/H1070 mm -Transport dimension: 1320/840/H1245 mm -Weight: 404 kg

Hydraulic press, two-column press, oil hydraulic press -Press force ram: 65 to -Hydraulic unit: max. 330 bar -Clamping table: 440 x 250 mm -Max. Insertion height: 295 mm -Max. Width: 300 mm -Max. Stroke: 220 mm -with safety cage -Max. Feed speed: 3 mm/sec -Retraction speed: 6 mm/sec -Dimensions: 1680/500/H2300 mm -Weight: 980 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-slot plate -Width: 300 mm -Length: 420 mm -Height: 70 mm -Groove width: 14 mm -Weight: 52 kg

T-slot plate, clamping plate with T slots, plate field, welding table, welding table -Intermediate plate for: hydraulic press, eccentric press, milling machine -Dimensions: 1100/650/H100 mm -Plate: solid -Bore: 8x -T-slot: 28 mm -Weight: 536 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-slot plate comes from: a Hüller Hille milling machine type nb-h 70 -Width: 475 mm -Length: 500 mm -Height: 68 mm -Plate: is solid -Groove width: 12 mm -Dimensions: 500/475/H68 mm -Weight: 90 kg

Clamping plate, measuring plate, measuring table, straightening plate, floating plate, transport plate, sliding plate-Manufacturer: Peiseler, floating plate-Top: 520/400 / H40 mm-Dimension box: 610/745 / H205 mm-Weight: 71 kg