prensas usadas para la venta (1,825)

Presión total: 1000 toneladas Carrera: 170 mm Altura de cierre (carrera hacia abajo, ajuste hacia arriba): 490 mm Ajuste de la corredera: 16 mm Velocidad máxima: 32 s.p.m. Superficie de la mesa: 800x800 mm Superficie de la superficie: 825x860 mm Apertura frontal libre de izquierda a derecha: 900 mm Carrera superior de eyección: 16 mm Capacidad superior de eyección: 10 toneladas Carrera inferior de eyección: 80 mm Menor capacidad de eyección: 32 toneladas Dimensiones L x Ancha x Alto: 2950x1950x4090 mm Peso de la máquina: 26 kg Transmisión principal: 33,5 kW

Presión total: 1000 toneladas Carrera: 170 mm Altura de cierre (carrera hacia abajo, ajuste hacia arriba): 490 mm Ajuste de la corredera: 16 mm Velocidad máxima: 32 s.p.m. Superficie de la mesa: 800x800 mm Superficie de la superficie: 825x860 mm Apertura frontal libre de izquierda a derecha: 900 mm Carrera superior de eyección: 16 mm Capacidad superior de eyección: 10 toneladas Carrera inferior de eyección: 80 mm Menor capacidad de eyección: 32 toneladas Dimensiones L x Ancha x Alto: 2950x1950x4090 mm Peso de la máquina: 26 kg Transmisión principal: 33,5 kW

Presión: 200 tnominal Potencia: 2000 kNstroke Longitud máxima: 1700 mm Alimentación de trabajo: 50 mm/seg Peso de herramientas máximo: 50000 kgVoltaje: 4000 V Tamaño de la tabla: 4,800 x 2,400 mm Potencia total requerida: 99 kWweight de la máquina aprox. 113 tDimensiones de la máquina aprox. Ancho de paso: mmstroke: mmLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Presión: 150 Carrera: mmDistancia entre mesa / RAM: 660 mm Superficie de la mesa: 1500 x 610 mm Altura de la mesa sobre el suelo: mmDiámetro del sello: 150 mm Rango L-W-H: 1,7 x 1,5 x 2,3 mPeso de la máquina ca.: Marco tC- orificio de prensa en la tabla 120 mmLos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton

Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton

pressure: 040 tchamfer lenght: 1600 mmdistance between columns: 1100 mmstroke of upper beam: 100 mmthroat: 195 mmworking feed: 10.0 mm/secreturn speed: 70.0 mm/sec: 180 barwork height max.: 840 mmtable width: 110 mmdayligth: 295 mmControl: ATL 550 total power requirement: 5.5 kWweight: 2500 kgrange L-W-H: 2100 x 1200 x 1800 mmEquipment:- NC-controlled hydraulic press brake, with torsion shaft- with ATLANTIC NC control - model ATL 550 Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1 Y2 axis) Possibility of programming different programs Memory capacity max. 200 programs - max. 400 blocks Swivel control panel, left front- Electro-motorized backgauge (X axis) with 2x stop fingers, manually adjustable (R Z axis)- Tool holder system A - with top wedge crowning- Split insert/bending tools- Lateral safety guards- rear safety guard- 1x freely movable double foot swit ...

Presión: 100 t. Distancia entre columnas: 400 mm. Carrera: 20 - 140 mm. Superficie de la mesa: 900 x 710 mmram. Superficie: 560 x 450 mmram. Ajuste: 80 mmday. Luz: 470 mmNo. De carreras: 70 Potencia total: 10,5 kWweight de la máquina aprox. 9 dimensiones de la máquina L x Ancho x Alto: 1,98 x 1,60 x 3,10 m Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Presión: Tchamfer Longitud: mmDistancia entre columnas: MmRequisito total de potencia: kWpeso de la máquina ca.: Espacio requerido: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

presión: diámetro de la pieza: mm. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

pressure: 130 tchamfer lenght: 3200 mmdistance between columns: 2700 mmControl: Cybelec CybTouch 12 throat: 400 mmstroke: 200 mmdayligth: 480 mm: 200 mm/sbending speed: 0-10 mm/s: 120 mm/stotal power requirement: 7,5 kWdimensions: 3600 x 1800 x 2700 mmweight: 8.200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: 250 mmstroke: 400 mmdayligth: 500 mmtable surface area: 800 x 500 mmControl: Siemens S7 hole in the table: 0 mmtable height over floor: 500 mmram surface: 800 x 500 mmworking feed: 10 mm/secspeed down: 110 mm/sekspeed up: 160 mm/sekpower requirement: 11,0 kWweight of the machine ca.: 5,5 tdimensions: 1,9 x 1,7 x 2,9 mSingle-column press with- Hardened and chrome-plated cylinder- Main cylinder diameter 220 mm- Auxiliary cylinder diameter 50 mm- Bosch Rextroth pump, valves, and filters- Hydraulic overload valve- Hydraulic proportional valve- Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time- Category 4 sensors and photoelectric sensor- Two-hand control panel with reset and emergency stop buttons- CE markingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tstroke: 380 mmtable surface area: 1100x424 mmdayligth: 180/750 mmdistance between columns: 1100 mmdiameter of piston: 90 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Presión: 15 Tthroat: - mmstroke: - mmDimensiones (L/W/H): 1200 x 1200 x 1700 mm Potencia total requerida: - kW Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

pressure: 150 tthroat: 400 mmstroke: 400 mmdayligth: 600 mmtable surface area: 1000 x 600 mmControl: Siemens S7 hole in the table: 0 mmtable height over floor: mmram surface: 1000 x 600 mmworking feed: 5 - 15 mm/secspeed down: 130 mm/sekspeed up: 180 mm/sekpower requirement: 18 kWweight of the machine ca.: 12,0 tdimensions: 2,4 x 1,9 x 3,5 mSingle-column press with- Hardened and chrome-plated cylinder- Main cylinder diameter 270 mm- Auxiliary cylinder diameter 70 mm- Bosch Rextroth pump, valves, and filters- Hydraulic overload valve- Hydraulic proportional valve- Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time- Category 4 sensors and photoelectric sensor- Two-hand control panel with reset and emergency stop buttons- CE markingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 2000 tdistance between columns: - mmstroke: 140 mmstrokes per minute: 15-50 H/mintable surface area: 1000 x 1100 mmdimension of ram: - mmweight of tools max.: - kgShut Height: 650 mmdistance table - lower edge of ram: - mmram adjustment: 25 mmmain drive: 30 kWtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mmProduction of stamped and formed parts, mechanical drive with toggle lever driveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamfer lenght: 0900 mmplate thickness: mmdistance between columns: 900 mmpressure: 20 tcolumn arm: 230 mmstroke length max.: 150 mmtravel -x axis: 350 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Longitud del bisel: 650 mm Grosor de la placa: -1,6 mm Peso de la máquina aprox. 150 kg Dimensiones de la máquina aprox: 2000 x 1000 x 900 mm Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Presión: 30 Tthroat: 250 mm-Tamaño de la mesa: 650 x 500 mmCarrera: 400 mmdayLuz: mínimo 120 / máximo 500 mmControl: Simatic HMI Touch SiemensRequisito total de potencia: 13 kWweight de la máquina aprox.: 3,5 tDimensiones de la máquina aprox: 2,5 x 1,70 x 2,85 mModo de configuración y modo de funcionamiento de un solo recorridoDos mesas laterales con una superficie de soporte de 850x500mmcon barras de bolas hidráulicas para piezas pesadasLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Presión: 630 tDiámetro: 320 mmCarrera: 310 mmPotencia total: kWPeso de la máquina aprox.: 3500 tDimensiones de la máquina aprox.: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

pressure: 60 tstroke: 400 mmdaylight longitudinal/sideways: 820 x 300 mmdayligth: 900 mmliter capacity: 6,5 lfeed down: 6,1 mm/secfeed up: 10 mm/secMotor output: 2,2 kWweight of the machine ca.: 0,675 tdimensions of the machine ca.: 1,46 x 0,85 x 2,1 mPresses can be operated both by hand and by motor.Cylinders can be moved sideways.Safety valve with cylinder end position.CE markingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tstroke: 400 mmdaylight longitudinal/sideways: 1010 x 300 mmMotor output: 4,0 kWliter capacity: 11,0 ldayligth: 900 mmtable surface area: 1010 x 560 mmfeed down: 4,8 mm/secfeed up: 7,5 mm/secweight of the machine ca.: 0,9 tdimensions: 1550 x 900 x 2450 mmHigh-quality hydraulic press can be operated manually or by motor.Cylinders can be moved sideways.Safety valve at cylinder end position.CE markedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.