sierras usadas para la venta (1,292)

Cutting range 90°: round material: 120mm, square material: 100mm/100mm, flat material: 180mm/100mm, cutting range 45° left: Round material: 120mm, square material: 100mm, flat material: 130mm/100mm, cutting range 60° left: Round material: 110mm, square material: 90mm/90mm, flat material: 90mm/100mm, cutting range 45° right: round material: 105mm, square material: 100mm/100mm, flat material: 130mm/100mm, motor power: 2.2kW, saw blade type: HSS 370, saw blade thickness: 3mm, saw blade width: 40mm, working height: 925mm, machine dimensions X/Y/Z: approx. 850mm/1100mm/2100mm, weight: approx. 450kg. Documentation available. On-site inspection is possible.

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade-Saw blade: Ø 635 x 6 mm-Inside: Ø: 80 mm-Bolt circle: Ø 120 x 22 mm-Number of teeth: 70, see photo-Weight: 10 kg

Screw jack, linear drive, linear gear, jack, screw jack element, spindle drive, valve drive, actuator, lifting drive, trapezoidal thread spindle-Manufacturer: Pfaff silver blue, screw jack-Type: SHE 2.5-Useful stroke: 200 mm-Shaft: Ø 16 x 40 mm on both sides-Spindle head: bore Ø 25 mm-Dimensions: 465/190/H165 mm-Weight: 10.1 kg

Diámetro de la hoja de sierra: 275 mm, rango de corte redondo (90): 100 mm, rango de corte plano (90): 160 mm / 80 mm, velocidad: 40 rpm - 80 rpm. Es posible la inspección in situ.

Diámetro de la hoja de sierra: 275 mm, potencia: 1,9 kW, velocidad: 80 rpm, rango de corte (plano): 140 mm / 70 mm, rango de corte (inglete): 100 mm / 70 mm, capacidad máxima de corte de tubos: 3 pulgadas, capacidad de corte de material sólido: 80 mm / 60 mm, capacidad de corte de material cuadrado: 50 mm / 50 mm. Dimensiones de la máquina X/Y/Z: aprox. 800 mm/700 mm/1500 mm, peso: aprox. 300 kg. Es posible la inspección in situ.

Dimensiones de la hoja de sierra: 3660 mm / 27 mm / 0,9 mm, rango de corte a 90 material redondo / material plano: 300 mm / 385 mm x 220 mm, velocidad de la hoja de sierra: 20 m-70 m / min, diámetro del rodillo de la hoja de sierra: 450 mm, potencia: 1,5 kW, dimensiones de la máquina X / Y / Z: aprox. 220 mm / 1500 mm / 1200 mm. Es posible la inspección in situ.

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade-Saw blade: blank Ø 460 x 5 mm-Inside: Ø: 50 mm-Bolt circle: Ø 100 x 18 mm-Number of teeth: 54, see photo-Weight: 5 kg

Está disponible una sierra de cinta Knuth. Potencia: 0,75 kW, voltaje: 400 V, frecuencia: 50 Hz. Es posible la inspección in situ.

Diámetro de la hoja de sierra: 2x400 mm, longitud máxima de corte: 4000 mm, ángulo de corte: +/-45. Documentación disponible. Es posible la inspección in situ.

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade-Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm-Inside: Ø: 32 mm-Bolt circle: mm-Number of teeth: 72, see photos-Weight: 26 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade-Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm-Inside: Ø: 32 mm-Bolt circle: mm-Number of teeth: see photo-Weight: 26 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade-Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm-Inside: Ø: 32 mm-Bolt circle: mm-Number of teeth: see photo-Weight: 26 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade-Manufacturer: Wagner, saw blade copy blade Ø 825 x 6 mm-Inside: Ø: 32 mm-Bolt circle: mm-Number of teeth: see photo-Weight: 23 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade-Manufacturer: Wagner, saw blade copy blade Ø 815 x 6 mm-Inside: Ø: 32 mm-Bolt circle: mm-Number of teeth: see photo-Weight: 28 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade-Manufacturer: Wagner, saw blade copy blade Ø 825 x 6 mm-Inside: Ø: 32 mm-Bolt circle: mm-Number of teeth: see photo-Weight: 23 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade-Saw blade: Ø 870 x 6 mm-Inside: Ø: 80 mm-Hole circle: Ø 160 x 27 mm / Ø 120 x 21 mm-Number of teeth: see photo-Weight: 30 kg

Fuho Tipo 1408 sierra de cinta para metal Sierra de cinta vertical Ancho de paso: 350 mm Dispositivo de hoja de sierra Motor 1kW 400V 50Hz Tijeras para hojas de sierra La mesa se puede girar transversal y longitudinalmente Guía de la hoja de sierra en la parte superior e inferior Longitud de la banda: 2362 mm G&2996-M40GH

Lg.Nr. 24029 Características técnicas: - Diámetro de la hoja de sierra de hasta 400 mm - Rango de corte a 90 alrededor de 130 mm - Cuadrado 120 mm - Rectángulo 300 x 40 mm - o 240 x 85 mm - a 45 alrededor de 130 mm - Cuadrado 110 mm - Rectángulo 245 x 40 mm - Inglete ajustable Li + Re cada uno 0 - 90 - 2 velocidades de corte 13 + 26 m/min - Accionamiento 400 V / 1,2 / 1,8 kW - Velocidad de avance de la hoja de sierra hydr. Infinitamente variable - Dispositivo de refrigeración - Máquina de reposición de material - Necesidad de espacio aprox. 2400 x 1850 x 1100 mm - Peso aprox. 1250 kg

diámetro de corte: 250 mmlongitud de la cinta de sierra: 3100 x 27 x 0,9 mmcapacidad 90 grados: cuadrado: 220 mmcapacidad 90 grados: plano: 280 x 190 mmvelocidad de la banda: 37 / 74 m/minmotor de sierra: 1,5 kWpeso de la máquina aprox.: 0,5 tdimensiones de la máquina aprox.: 1,6 x 1,4 x 1,3 mSierra de cinta de inglete- Semiautomática- Doble inglete- Detección de material durante el descenso

Key data: 500 mm

Sierra ingletadora doble Pertici Tipo: UNIVER 502D2 Año de hacer: 1998 Corte de perfiles de aluminio y PVC Longitud de corte 360 – 6000 mm Anchura de corte máx. 150 mm Altura de corte máx. 350 mm Diámetro de la hoja de sierra D 500 mm Revoluciones de la hoja de sierra 2800 rpm. Diámetro de la hoja de sierra d 30 mm Las hojas de sierra giran de 90 a 45 a 0 Potencia del motor: 2,2 + 2,2 kW Potencia conectada 4,5 kW, 380 voltios 50Hz Proceso automático de alimentación y corte La sierra se desplaza automáticamente a la cota introducida y corta automáticamente Panel de control con pantalla digital para la dimensión de corte se utilizó para cortar tubos cuadrados de aluminio en el Construcción de ventanas y invernaderos Buen estado de trabajo, corte exacto Dimensiones 7200 mm x 1200 mm x H 1700 mm Peso: 1980 kg

capacity 90 degrees: round: 300 mmcapacity 90 degrees: square: 330 mm: 400 x 310 saw band length: 3820 x 34 x 1,1 mmband speed: 22 - 88 m/mintable height: 930 mmtotal power requirement: 2,2 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 2,22 x 1,2 x 2,1 mDouble miter band saw, hydraulic semi-automatic• miter left 60° + right 45°• Industrial hydraulics, powerful 18 bar• Best access to the material• Ammeter to check a.- Optimization of cutting force- Tape life- cutting course• Vise closes/opens hydraulically• Material turntable with ball bearings b.• Adjustable quick-release• Material height sensor Semi-automatic function:1. Clamp material2. Saw starts3. Rapid lowering to the start of the material or the same for series cutting cut4. Saw band off5. Raise the frame to just above the material6. Open the viseThe data for this ad was created with ModulMWS ...

cutting speed: 60-100 m/minengine output: 7,5 kWweight: 8800 kgHorizontal bandsaw manufacturer: Behringer, Horizontal bandsaw Automatic bandsaw type HBP 430Metal bandsaw, Band saw machine, bandsaw, Vertical bandsaw, Horizontal bandsaw, hydr. horizontal bandsaw machine, Semi autom, Band saw machine,Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 225 mmsaw band length: 2480 mmcutting width: max. 245 x 150 mmvoltage: 230 Vpower capacity: 1,5 kWdimensions of saw-band: 2480 x 27 x 0,9 mmmitter cutting: 0 - 60 °cutting speed: 20 - 90 m/minweight of the machine ca.: 185 kgdimensions of the machine ca.: 1,4 x 0,69 x 1,7 m- stepless speed- stepless feed- miter cut- Bi-metal saw band- Material stop- Machine base- Coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diámetro de la hoja de sierra: 275 mmdiámetro de corte: bis 90 mmrango de corte plano: 120 x 75 mmvelocidades de giro: 40/80 U/mincorte a inglete: 45/90/-45 peso de la máquina aprox.: aprox. 150 kgAlimentaciónmanual de la hoja de sierra Accesorios:Dispositivode refrigeración Bastidor inferior con 2 cajones

cutting diameter: 315 mmdimensions of saw-band: 3460 x 1,1 x 34 mmcutting speed: 35 / 70 m/mincutting width: 400 x 250 mm: 250 / 280 mmImpact energy: 220 / 280 mm: 180 mm: 140 mmconnected load frequency: 400 Volttotal power requirement: 2,2 kWweight of the machine ca.: 0,6 tdimensions: 2,1 x 1,0 x 1,5 mSemi-automatic miter band saw- Miter cuts up to 45° left + right- Miter cuts up to 60° right- Vice with quick release device- Tape tension control via manometer- Electr. automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mmcapacity 90 degrees: round: 100 mmcapacity 90 degrees: square: 100 mmcapacity 90 degrees: flat: 100 x 195 mmcapacity 45 degrees: round: 100 mmcapacity 45 degrees: square: 100 mmcapacity 45 degrees: square: 100 x 135 mmsaw blade turning speeds: 2800 U/mintotal power requirement: 1,5 kWweight of the machine ca.: 250 kgdimensions: 0,7 x 0,7 x 1,4 mATTENTION: SPECIAL PRICE - Miter left/right 45° - fixed locking points at the most important miter angles - Pneumatic double clamping device - Safety engine brake - Complete with fog spray device and machine baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mmsaw band length: 2950 x 27 x 0,9 mmtable height: ca. 800 mmband speed: 36/72 m/mintotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,37 tdimensions of the machine ca.: mMEP sawing machine:Saw band bow, vice unit and base made of durable cast ironPrecision grade marking on the cast iron structureElectrical system (with fully identifiable electrical wiring andLow voltage system 24 V)Switch handle IP 55 for manual cycles (if available)Rotating scraper brush for the saw bandClamping unit with vice for quick approachAccurate stops with adjustment for miter cuts at 0°, 45°, 60° leftBi-metal saw band 2950 x 27 x 0.9 mmKeys, instructions for use and instructions for ordering spare parts in theUser languageSHARK 281 with manual operation and SHARK 281 CCS with manual operation and cuttingwith automatic head feed by its own weight.CCS (Cut Control System) w ...

capacity 90 degrees: round: 255 mmcapacity 90 degrees: square: 240 mm: 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mmtable height: 870 mmband speed: 18 - 110 m/mintotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,63 tdimensions of the machine ca.: 1,8 x 1,85 x 1,85 mMiter band saw, fully automatic GBS 250 Super VA-I MPS• Miter left. 45° automatic operation• Miter left. 60° semi-automatic operation(cuts without programming)• Shockproof and ergonomic control panelwith oil-proof EPDM cover a.• Material height sensor c.(Automatic cut start detection)• Frame and gearbox made from one piece,very quiet cutting and very low vibration• Chip tray can be removed (disinfection)• Easy access to the saw, material and feed unit• Foldable safety cover• Fine feed adjustment• Semi-automatic. Cut!Saw automatically with microprocessor controlAdjustable for 2 program l ...

capacity 90 degrees: round: 250 mmcapacity 90 degrees: square: 210 mm: 290 x 210 mmsaw band length: 2.965 x 27 x 0,9 mm mmtable height: 940 mmband speed: 35 / 70 m/mintotal power requirement: 1,1/1,3 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 1,3 x 0,8 x 1,5 mSPECIAL PRICE!Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 34 / 74 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic coolingShare of freight costs 120 EURThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 680 mmcapacity 90 degrees: square: 640 mm: 1250x600 mmcapacity 45 degrees: round: 680 mmcapacity 45 degrees: square: 600 mmcapacity 45 degrees: flat: 870x600 mmcapacity 60 degrees: round: 580/550 mmcapacity 60 degrees: square: 530/450 mmcapacity 60 degrees: flat: 550x450 mmsaw band length: 8140 x 54 x 1,6 mmband speed: 15 - 90 m/mintable height: 855 mmtotal power requirement: 7,5 kWweight of the machine ca.: 5,3 tdimensions of the machine ca.: 5,75 x 4,2 x 2,75 m2-column double miter band saw for quick cuttingwith pusher system P15. Option P30Hydraulic saw frame lowering• NC controlled• Automatic angular positioning from + 60° to – 60°High quality automatic miter adjustmentSpecial development for cutting profiles and beams.The highest positioning accuracy is achieved via the new B&S positioning system”.reached. An intelligent NC control ensures smoot ...