sierras usadas para la venta (1,292)

diámetro de corte: 250 mmlongitud de la cinta de sierra: 0 mmancho de corte: mmdiámetro de la pieza de trabajo: 150 mmrequisito de potencia total: kWpeso de la máquina aprox.: tdimensiones de la máquina aprox.: msierra de cinta horizontal

cutting diameter: 250 mmsaw band length: 3150 x 27 x 0,9 mmtable height: 700 mmcutting width: 250 x 320 mmcutting speed: 25 - 90 m/mindimensions of saw-band: 2480 x 27 x 0,9 mm: 120 mm: 120 mm: 190 mmImpact energy: 190 mmconnected load frequency: 400 Volttotal power requirement: 1,5 kWweight of the machine ca.: 0,5 tdimensions: 0,95 x 1,16 x 1,98 mRock-solid band saw for solid material- Double miter cuts up to 60°- AutoCut- Vice with quick clamping device- Belt tension control- Electric automatic cooling system- Material suggestionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mmcapacity 90 degrees: round: 115 mmcapacity 90 degrees: square: 95 mm: 180 x 95 mmWorking height: 925 mmsaw blade turning speeds: 15+30+45+90 U/mintotal power requirement: 1,8/2,5 kWweight of the machine ca.: 0,41 tdimensions of the machine ca.: 0,8 x 1,0 x 1,85 mElectro-pneumatic - semi-automatic vertical circular saw with microProcessor control for miter cuts from 60° left to 45° right. WithLinear guide of the saw head.•new system with head sliding vertically on linear guides Upstream slide rails with recirculating balls.•Double gear set for high transmission performance•4 speeds 15/30/45/90 rpm•Vice opening 190 mm• Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material•Pneumatic vertical vice•Saw blade HSS DMO 5 Æ 350x32x2.5 for solid and profile material•Vise with counter-clamping d ...

capacity 90 degrees: round: 110 mmcapacity 90 degrees: flat: 255x160 mmcapacity 90 degrees: square: 210x210 mmcapacity 45 degrees: round: 160 mmcapacity 45 degrees: flat: 165x110 mmcutting range 45 degree right side: square: 150x150 mmcutting speed: 11/13/17/22/26/34 m/minstroke speeds: 50/64/82/100/128/164 Hübe/mindimensions of saw-blade: 400x36x2 mmpower requirement: 1,8 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm

Longitud máx. de la sierra: 5.000 mm Diámetro máx. de la hoja de sierra: 500 mm Posicionamiento automático de la longitud, así como ajuste motorizado del ángulo hacia adentro y hacia afuera Transportador de rodillos móviles Soporte material Dispositivo de pulverización de cantidad mínima Peso: 1800 kg

cutting diameter: 240 mmsaw band length: 2910 x 27 x 0,9 mmcutting width: 310 mmtable height: 900 mm: 35 + 75 m/min: 1,1/1,8 kW: 470 kg: 800 x 1720 x 1450 mmManufacturer no. 20437Description:- Miter cuts left 60° and right 45°- Quick-action clamping stick can be moved in the T-slot for quick position changes- Hydraulic brake cylinder- Large ball-bearing turntable for easy miter adjustment (durable)- Chip clearing brush- Machine base with automatic cooling system- Lockable main switch, emergency stop separately- EMC (Electromagnetic Compatibility), UVV- Current consumption display (saw band wear history, tool monitoring)- Automatically more performance with the proven Berg & Schmid 3-stage AutoCutsystemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Oferta 25091 Características técnicas: - Diámetro del rollo 420 mm - Proyección 400 mm - Altura máxima de paso: 280 mm - Tamaño de la mesa 600 x 600 mm - La mesa se puede girar en 2 niveles± 45° y ± 15° - Altura de la mesa desde el suelo aprox. 975 milímetros - Longitud de la hoja de sierra 3200 - 3400 mm - Velocidad de la hoja de sierra continua 10 - 260 m/min - Accionamiento 400 V / 0,9 / 1,7 kW - Peso aprox. 500 kg - Necesidad de espacio aprox. 750 x 1950 x 1150 mm

cutting diameter: 260 mmcutting width: 400 mmcapacity 90 degrees: flat: 400 x 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 45 degrees: round: 260 mmband speed: 17 - 110 m/minengine output: 3,5 kWdimensions of saw-band: 3830 x 25 x 0,9 mmweight of the machine ca.: 1,3 tdimensions of the machine ca.: 2,1 x 2,0 x 1,6 mHigh-performance fully automatic band saw with- coolant system- documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370x32x3 mm: 15-150 U/minvice: 190 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 180x100 mm: 115 mm: 90 mm: 90x90 mm: 115 mm: 100 mm: 120x100 mm: 115 mm: 100 mm: 120x100 mmtotal power requirement: 5,5 kWweight: 615 kgOverall size: 1400x1400x2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Oferta 25078 Características técnicas: - Rango de corte a 90° alrededor de 550 mm - Plano 570 x 550 mm - Velocidad de corte ajustable de forma continua de 20 a 100 m/min - Hidra. Subir + bajar el bastidor de la sierra - Presión de corte ajustable de forma continua de 0 a 10 m/min - Máquina de reposición de material - Longitud de tope 500 mm - Potencia total de accionamiento aprox. 400 V / 5,7 kW -Atacar - 2 x transportador de rodillos 1000 + 3000 mm - Necesidad de espacio aprox. 3400 x 2100 x 1300 mm - Peso aprox. 2100 kg

Oferta 24573 Características técnicas: - Diámetro del disco de corte de hasta 356 mm - Capacidad de separación de hasta 120 mm -Mot. Avance de corte -Uno. Avance transversal 120 mm - Dimensiones de la mesa: 410 x 310 mm - Recorrido de la mesa: 220 mm - Accionamiento 400 V / 5,5 kW - Dispositivo de refrigeración - Necesidad de espacio aprox. 1500 x 1800 x 1050 mm - Peso aprox. 850 kg

sierra de cinta para metal Longitud de la hoja 3400 Buen estado, poco usado Listo para la demostración

cutting diameter: 320 mmsaw band length: 4160 mmcutting width: 610 mmcutting lenght max.: 500 mmclamping head:: max. 620 mmsaw speed: stufenlos 15-120 m/minwork height max.: 760 mmdimensions of saw-band: 4160 x 34 x 1,1 mmControl: Siemens Siematic OP3 total power requirement: 2,6 kWweight of the machine ca.: 1,96 tdimensions of the machine ca.: 2,55 x 2,45 x 1,5 mCE signed: Condition: ready for operation: Video available on our website: Electric 400 Volt: Kloeckner + Siemens Cooling equipment: Well-maintained fully automatic miter band saw with Siemens Siematic OP3 control for quantity and cutting length, hydraulic frame clamp, stepless saw band speed. Machine only used in individual production with small pieces for about 3 hours per week!Cutting range 0° / 90°- round 320 mm- flat 610 x 320 mmCutting range 75°- round 320 mm- flat 350 x 200 mmCutting range 60°- round 300 mm- flat  ...

Características técnicas: - Dimensiones de la hoja de sierra: 315 x 2,5 x 32 mm - 2 velocidades de husillo de hoja de sierra aprox. 40 + 80 rpm - Rango de corte a 90° alrededor de 95 mm - Plano 110 x 70 mm - a 45° alrededor de 90 mm - Plano 85 x 70 mm - Inglete ajustable izquierda + derecha hasta 45 ° - Tornillo de banco de material - Accionamiento 400 V / 0,75 / 1,3 kW - Necesidad de espacio aprox. 700 x 700 x 700 mm - Peso aprox. 200 kg

Longitud máx. de la sierra: 6.000 mm Diámetro máx. de la hoja de sierra: 500 mm Posicionamiento automático a través del control de longitud y ángulos Diamond Posibilidad de giro de los ángulos hacia adentro y hacia afuera (20-135°) Transportador de rodillos móviles Cabina insonorizada Dispositivo de pulverización de cantidad mínima Cinta transportadora de virutas Peso: aprox. 2.800 kg

saw blade diameter: 450 mmcutting diameter: 150 mmcapacity 90 degrees: flat: 330 x 40 mmcapacity 45 degrees: round: 140 mmcapacity 45 degrees: flat: 250 x 40 mmcutting speed: 10 - 70 m/minsaw head feed: 0 - 1000 mm/minsawing motor: 1,7 / 2,6 kWweight of the machine ca.: 1,1 tAccessories: used sawblade 450 mmø, material feeder M 45 NC für autom. run, ingoing roller track 7000 mm, outgoing roller track 4000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mmcutting diameter: 130 mmcapacity 90 degrees: square: 120 x 120 mmcapacity 90 degrees: flat: 220 x 80 mmfeed length: 600 mmfeed length: multiple: 1800 mmcutting speed: 10/13/15/20/26/30 m/minmitre joint cuts -/+ degrees: 60 total power requirement: 5,5 kWweight of the machine ca.: 1,8 tdimensions of machine L x W x H: 2,45 x 1,20 x 2,00 m- mitre cutting +/- 60 ° with DRO -Accessories: new sawblade 400 mmø, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ø de la hoja de sierra: 360 mm Rango de corte a 90° redondo: 110 mm Área de corte en rectángulo de 90°: 110 x 400 mm Rango de corte a inglete a 45° redondo: 110 mm Área de corte a inglete en rectángulo de 45°: 110 x 280 mm Velocidad de corte: 16 - 50 m/min Motor de accionamiento: 380 V, aprox. 1,5/2 kW Espacio necesario: 2600 x 1150 x 1600 mm Peso: aprox. 1000 kg

: 230 mm: 2730 mm: 320 mm: 230 mm: 320x130x mm

cutting diameter: 235 mmdimensions of saw-band: 2480 x 27 x 0,9 mmcutting width: 280 x 190 mmcutting speed: 45/90 m/min: 120 mm: 120 mm: 190 mmImpact energy: 170 mmconnected load frequency: 400 Volttotal power requirement: 1,1 kWweight of the machine ca.: 290 Kgdimensions: 1,2 x 0,8 x 1,2 mDouble miter band saw-Miter cuts up to 60° left and 45° right-Vice with quick clamping device-Band tension control-Electr. Automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mmsaw band length: 3150 x 27 x 0,9 mmtable height: 750 mmcutting width: 170 x 310 mmcutting speed: 25 - 90 m/min: 130 mm: 130 mm: 205 mmImpact energy: 205 mmconnected load frequency: 400 Volttotal power requirement: 1,5 kWweight of the machine ca.: 0,5 tdimensions: 0,95 x 1,16 x 1,98 mSolid band saw- Double miter cuts on the right up to 60°, on the left up to 45°- AutoCut- Vice with quick clamping device- Belt tension control- Electric automatic cooling system- Material stop max 600mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 460 mmsaw band length: 5334 mmcutting width: 1,3 mmcutting range - square -: 320 x 320 mmcutting range - flat -: 500 x 320 mmcontrol: minipos 807 cutting speed: 16 - 80 m/mindimensions of saw-band: 5334 x 41 x 1,3 mmfeed length: 580 mmfeed length: multiple: 5800 mmtotal power requirement: 8 kWweight of the machine ca.: 3,5 tdimensions of machine L x W x H: 2,7 x 2,95 x 2,15 mAccessories: roller track 4150 mm length, roller track 2150 mm length, bundle clamping device, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mmcutting diameter: 120 mmcapacity 90 degrees: square: 110 x 110 mmcapacity 90 degrees: flat: 140 x 110 mmcapacity 45 degrees: flat: 140 x 90 mmtotal power requirement: 2,6 kWweight of the machine ca.: 0,5 tdimensions of machine L x W x H: 0,95 x 1,38 x 1,85 mAccessories: 1 used sawblade 350 mmø, coolant- with hydr. clamping of workpiece and hydr. feed of sawblade -The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diámetro de corte: 215 mmLongitud de la banda: 400 mmCarrera: - mmPotencia total requerida: - kW Peso de la máquina aprox.: - TDimensiones de la máquina aprox.: - M

Key data: 260 mm, 3660 mm

FORTE muy bien conservado, A la llamada

Avance de material en cualquier longitud (carrera máx. 610 mm) Diámetro de corte: redondo 510 mm, plano 500 x 500 mm Velocidad de corte ajustable mediante controlador: 25 - 235 m/min Transportador Instrucciones de funcionamiento, diagramas de circuitos y listas de piezas de repuesto disponibles Poco menos de 5.000 horas de aserrado Para obtener más datos técnicos, consulte la foto o a pedido Peso de la máquina: aprox. 3 t

Rango de corte a 90° redondo: 320 mm Área de corte plana a 90°: 320 x 200 mm Rango de corte a inglete a 45°: 210 mm Dimensiones de la hoja de sierra: 500 x 40 x 2 mm Velocidades de elevación: 11, 19 y 32 /min electr. Conexión: 380 V, 2,2 kW Espacio necesario: 1700 x 750 x 1320/1560 mm Peso: 525 kg

: 325 mm: 4380 mm: 400 mm: 325 mm: 400x325 mmdimensions of saw-band: 4380x34x1,1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 360 mm: 4800 mm: 510 mm: 360 mm: 510x360 mmdimensions of saw-band: 4800x34x1,1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 350 mm: 4160 mm: 400 mm: 350 mm: 400x350 mmdimensions of saw-band: 4160x34x1,1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.