tornos usadas para la venta (2,807)

: 0350 mm: 196 mm: 0650 mm: 170 mm: 42 mm: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diámetro de giro sobre la bancada: 500 mmdiámetro de giro sobre el soporte deslizante: 320 mmlongitud de giro: 2100 mmaltura central: 250 mm: mmagujero del husillo: 60 mmrango de velocidad de giro: 11 - 2000 U/minpotencia total: 7,0 kWpeso de la máquina aprox.: 2,9 tdimensiones de la máquina aprox.: 4,3 x 1,2 x 1,3 mmTornos con:- Poste de herramienta de 4 posiciones- Mandril de 3 mordazas 315mm- Punto de centradoLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning diameter: 460 mmturning length: 795 mmcontrol: MORI SEIKI M730 BM Swing diameter face slide: 590/360 mmspindle passage: 80 mmTraverse X/Z:: 260/795 mmNumber of working hours: 19.552 hCutting time: 10.704 hspindle drive: 18,5 kWtotal power requirement: 40 kVAweight of the machine ca.: 6,4 tdimensions of the machine ca.: 3.994 x 3.056 x 2.187 mChip chuck Ø250 mm.Chuck sub-spindle Ø170 mm.Holder HAINBUCHchip conveyorsuctionBar feeder Hydrafeed Multiservo mod MSVmax. bar length 1,600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 800 mmturning diameter over slide rest: 540 mmturning length: 4000 mmcentre height: 400 mmcentre distance: 4000 mmspindle turning speed range: 9 - 1140 U/minweight of the machine ca.: 8,0 t- with gap with insert - Accessories: 3-jaw chuck FORKARDT 400 mmø, 4-jaw chuck 500 mmø, faceplate 800 mmø, DRO on X-and Z-axis ACU-RITE, MULTIFIX-head with various inserts, 2 solid steadies, 1 running steady, running center, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diámetro de giro sobre la bancada: 460 mmlongitud de giro: 1250 mmaltura del centro: 230 mmdistancia entre ejes: 1250 mmrango de velocidad de giro: 35 - 1800 U/minpeso de la máquina aprox.: 2,7 tAccesorios: mandril de 3 mordazas 250 mmø, cabezal MULTIFIX con 3 insertos, sólido estableLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning diameter: 310 mmturning length: 600 mmcontrol: Sinumerik 810 D PL Siemensturning diameter over bed: 425 mmMain spindle: turning speed range - main spindle: 500 - 4.500 min/-1max. Torque: 280 Nmpower capacity - main spindel: 16,5 kWSpindle diameter: 100 mmC-Axis: 360 °chucking diameter: 210-52 mmspindle bearing diameter: 120 mmclamping cylinder: 65 mmBar feed: max. 65 / (52) mmspindle nose: A8 DIN 55026axis stroke:: x-axis: 230 mmz-axis: 740 mmrapid traverse X-axis: 15 m/minrapid traverse Z-axis: 24 m/minturret:: tool positions turret: 12 pos.driven statition: 12 pos.tool taper: VDI 30 DIN 69880Spindle speed driven tools: 6.000 min -1power capacity - driven tools: 3,7 kWmax. Torque: 9,5 Nmtail stock: dia. of quill: MK 4 80 mmquill stroke: 120 mmtailstock adjustment: 475 mmtension force: 500 daNtotal power requirement: - kWweight of the machine ca.: 4,2 tdimensions of the mach ...

diámetro de giro sobre la bancada: 360 mmdiámetro de giro sobre el soporte deslizante: 180 mmlongitud de giro: 900 mmrango de velocidad de giro: 25 - 1600 U/minpotencia total: aprox. 3 kWpeso de la máquina aprox.: 1,5 tdimensiones de la máquina aprox.: 2,5 x 1 x 1,5 mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning diameter: 340 mmturning length: 600 mmturning diameter over slide: 300 mmcontrol: Siemens 840 D spindle passage: 55 mmspindle nose: ASA 6 number of spindle speeds: 4000 U/minspindle motor: 27 kWNumber of tools: 12 VDI 40driven stations: 12 VDI 40speed of driven tools: U/minpower of driven tools: kwrapid traverse: 30 m/minSpindlespeed subspindle: U/minpower sub spindle: 15 kwrange L-W-H: mweight of the machine ca.: tCNC- lathe with driven tools an subspindleDriven toolstation cannot be used due to cable breakage- chip conveyor- sub spindle- driven tool stations (not working)- tool measuringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diámetro de giro: 200 mmlongitud de giro: - mmcontrol: DMG potencia total requerida: kWpeso de la máquina aprox.: 5200 kgdimensiones de la máquina aprox.: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

diámetro de torneado: 246 mmlongitud de torneado: 445 mmcontrol: Fanuc 32 potencia total requerida: kWpeso de la máquina aprox.: 4250 kgdimensiones de la máquina aprox.: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning diameter: 830 mmswing diameter: 920 mmturning height: 750 mmcontrol: Fanuc 0i-TF travel -x axis: 495 mmtravel -z axis: 780 mmturning speed range - spindle: 1940 U/mindrive capacity - spindle motor: 37 / 30 kWchucking diameter: 380 mmturret (x-stations): 12 posrapid traverse X-axis: 20 m/minrapid traverse Z-axis: 20 m/minfeed: mm/minspindle diameter in front bearing: 160 mmc-axis: 360° (in 0,001°) workpiece weight: 870 kgtotal power requirement: 61,78 kVAweight of the machine ca.: 9,5 tdimensions of the machine ca.: 2,1 x 2,7 x 3,6 m- Control unit FANUC 0i-TF- Tool Turret 12-fold- Coolant system- Foot switch- Automatic safety switch Front door & full enclosure- Work area lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 275 mmturning length: 900 mmcontrol: TRAUB TX8i Main- opposite spindle: spindle passage: 65 mmpower capacity at 100 % load: 25,20 kWpower capacity at 40 % load: 30,20 KWmax. torque at 40% / 100% load: 180 / 135 Nmspindle turning speed - stepless: 1 - 5.000 U/minspindle diameter in front bearing: 110 mmC-axis: 1 - 500 U/minworktool support: No. 1 x-axis: 290 mmy-axis: 165 mmz-axis: 600/950 mmB - axis: 360 °rapid traverse X/Y/Z: 18 / 18 / 30 m/minfeed capacity X/Y/Z: 10 / 10 / 7 kNnumber of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mmtoolpiece turning speed range: 8.000 / 2.000 U/minpower capacity at 25 % load: 5,80 kWmax. torque at 25% load: 4x18,6 / 4x74 Nmtool taper: TRAUB Ø60 worktool support: No.2 / No.3 / No.4 x-axis: 170 mmz-axis: 600/950 mmy-axis: +/- 60 mmrapid traverse X/Y/Z: 18 / 15 / 30 m/minfeed capacity X/Y/Z: 10 / 10 / 7 kNtool turret - number o ...

turning diameter: 340 mmturning length: 300 mmbar material dia.: 65 mmcontrol: FANUC Main Spindle:: spindle speed:: 4500 min-¹spindle motor: 11 / 15 kWc-axis: 0,001 °travel -x axis: 227,5 mmtravel -z axis: 320 mmy-axis: +/- 41 mmtail stock: tailstock quill stroke: 80 mmtailstock adjustment: 200 mmLive Tools: work piece power: 5,5 / 3,7 kWtoolpiece turning speed range: 6000 U/mintotal power requirement: 24 kVAdimensions of the machine ca.: 1,65 x 1,65 x 1,85 mmTotal weight, approx.: 3200 kgCommissioned in 2015- FANUC CNC control- Chuck diameter: 315 mm- C-axis with spindle brake- 12-station tool turret with driven tools- 3.2 m bar feeder- Tailstock MK 4- Set of tools- Set of spare parts (all linear guides, covers)12,000h operating hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mmturning dia. in gap: 400 mmturning length: 600 mmcentre distance: 750 mmspindle turning speed range: 20 - 1000 U/minspindle bore: 25 mm3-jaw chuck: Röhm, Ø 200 mmdimensions of the machine ca.: 2000 x 800 x 1500 mmweight of the machine ca.: 1200 kgFixed bezelTurning bezelTurning center pointThree-jaw chuck Röhm, Ø 200 mm, incl. inner and outer jawsQuick-change tool holder Original Multifix size B with 2 change holdersSpindle brakeTailstock quill MK3Machine feetLathe chuck guardChip guardWork lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 380 mmturning length: 1000 mmswing dia.: 695 mmX-Axis movement: 234 mmY-Axis movement: 100 mmZ-Axis movement: 1090 mmMinimum indexing C-Axis main Spindle: 0,0001 °Number of tools on turret: 12 Number of driven tools: 12 xSpindle speed driven tools: 5000 1/minSpindle motor driven tools: 5,5 / 3,7 kWTool type: Mazak VDI control: Mazatrol Smooth G Main Spindle:: Spindle Speed: 4000 1/minspindle motor: 26 / 22 kWspindle bore diameter: 80 mm2nd Spindle:: spindle turning speed range: 6000 U/minspindle motor: 11 / 7,5 kWspindle bore: 80 mmspindle distance: 1005 mmtotal power requirement: 43 kVAWeight: 6,65 tdimensions of the machine ca.: 5,6 x 1,95 x 1,9 m- Mazatrol SmoothG CNC control- Main and counter spindle- 12-station tool turret with driven tools and Y-axis- 3-jaw chuck-- Main: 10-- Counter: 6- Chip conveyor- Coolant system- Extraction systemThe data for this ad was c ...

turning diameter over bed: 1020 mmturning diameter over slide rest: 660 mmturning length: 5000 mmmin./max workpiece dia.: 210 - 880 mmspindle diameter: 115 mmspindle taper: 140 spindle turning speed range: 5 - 500 U/minfeeds - longitudinal: 0,20 - 3,05 mm/Ufeeds - cross: 0,07 - 1,04 mm/Uslide adjustment: longitudinal: 5000 mmcross: 680 mmworkpiece weight: 5000 kgmain drive motor: 22 kWthread - mm pitch: 1 - 120 mmthread - module: 0,5 - 30 thread - inch: 28 / 1/4 spindle bore: 84 mmtail stock: tailstock quill taper MT: 5 tailstock quill stroke: 300 mmtotal power requirement: 27 kWweight of the machine ca.: 15,5 tdimensions of the machine ca.: 6,5 x 2,2 x 1,8 m- 1 fixed bezel- Faceplate Ø 1000 mm- 4-fold steel holder- Tailstock- 2-track bed designThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 2000 mmturning length: 5000 mmturning diameter over slide rest: 1050 mmturning diameter over bed: 2000 mmfaceplate diameter max.: 1200 mmspindle turning speed range: 1,6 - 250 U/minmain drive motor: 110 kWmax. workpiece weight between centres: 25 tworkpiece weight max.: 40 tcentre height: 700 mmswing diameter max. over bed cover: 1140 mmmax.workpiece weight:each extra steadyrest: 3000 kgtotal power requirement: 120 kWweight of the machine ca.: 55 tdimensions of the machine ca.: - m- Face Plate Ø 1200 mm- Coolant- Rapid travel- Tail stock mit Face PlateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 650 mmturning length: 2042 mmcontrol: FANUC 0iT greates pass round over bed: 900 mmswing diameter over slide rest: 690 mmmax. turning diameter: 650 mmspindle turning speed range: 1500 U/minspindle drive motor: 45 / 37 kWspindle nose: A1-15 bar material dia.: 165,5 mmNumber of tools: 12 St.travel -x axis: 362 mmtravel -z axis: 2155 mmtail stock: tailstock adjustment: 1000 mmdiameter of quill: 120 mmquill stroke: 120 mmmax. workpiece weight -without tailstock: 1400 kgworkpiece weight max.: 2600 kgRapid Travel X / Y / Z-Achse: 16 / - / 20 m/mintotal power requirement: 60,25 kWweight of the machine ca.: 12,5 tdimensions of the machine ca.: 5,98 x 2,5 x 2,88 m- Fanuc F0i CNC control- 21 chuck- 12-station turret- MT 6 tailstock- Chip conveyor- 1 steady rest- 1 tool measuring arm- 14.5 bar coolant system- Oil separator- Chip conveyor- Programmable tailstock- Plate for manual  ...

x-axis: 675 mmz-axis: 1530 mmy-axis: 300 mmcontrol: CELOS ERGOline turning speed range - main spindle: 4000 min/-1spindle passage: 91 mmspindle motor: 18,5 / 15 kWspeed range - counter spindle: 4000 min/-1: 76 tool length - max.: 400 mmtool diameter: 130 mmno. of tools in turret 1: 12 milling head speed: 12000 U/minmilling spindle - taper: Capto C6 milling spindle drive: 22 kWtotal power requirement: 88 kVAtotal wight: 18,2 tdimensions of the machine ca.: - mEquipped with:- CELOS ERGOline CNC control- Main and counter spindle with 4000 rpm, 91 mm passage- Kitagawa 304 mm chuck- Milling spindle with Capto C6 and 12,000 rpm, 22 kW- 76-position tool changer- Counter spindle with tailstock function- Manual tool presetter- High-pressure coolant system / IKZ 70 bar- Coolant gun- Chip conveyor- Oil skimmer- Oil separator- RenishawPower On: 17700h, Machining: 7200hThe data for this ad was create ...

turning diameter: 1220 mmturning length: 5000 mmcontrol: FAGOR 8055 TC turning diameter over slide: 880 mmturning diameter over bed: 1220 mmtail stock: M80 tailstock quill diameter: 180 mmtailstock quill stroke: 260 mmspindle turning speed - stepless: 0 - 1000 U/minspindle motor: 40 kWtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mcomplete retrofit in 2020- CNC Control Fagor 8055 TC- Tool holder turret:SAUTER model 0.5.320.025, vertical axis- Chip Conveyor- 4-jaw chuck Ø1000 mm- 3-jaw chuck Ø500 mm- Steady Ø500 mm- Movable bezel Ø250 mm- Special bar for machining very long interiors- CoolantRETROFITTING IN 2020• Grinding of carriage guides on the X and Z axes• Preloading of X and Z axis ball screw nuts• New Turcite placed on the X and Z axis carriages• General review and disassembly of the engine and head regulator• General review  ...

Diámetro de la placa frontal: 5500 mmDiámetro de giro: 6000 mmAltura de torneado: 4400 mmVelocidades de giro: - U/minMotor de accionamiento principal: - kWControl: FAGOR 8055 Peso máximo de la pieza: 100 Carrera de desplazamiento a cada lado: 1500 mmCarril transversal - Ajuste: 3000 mmPotencia total requerida: - kWPeso de la máquina aprox.: - tDimensiones de la máquina aprox.: - mequipado con:- Control CNC 8055- 1ram en travesañoLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

faceplate diameter: 2950 mmswing diameter: 3200 mmturning height: 3500 mmturning speeds: U/minmain drive motor: 70 kWControl: FAGOR 8070 workpiece weight max.: 20 tcolumn daylight: 3300 mmmilling motor: 16 kWfeeds crossrail-slide vertical: 3000 mm/minfeeds crossrail-slide horizontal: 3000 mm/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mequipped with:- CNC Control FAGOR 8070- C-axis (angular positioning of the table)- angular milling Head- Telescopic covers of the cross rail and columns guideways- Chip ConveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diámetro de giro: mmlongitud de giro: 300 mmdiámetro de giro sobre la corredera de la bancada: mmpotencia total requerida: kWpeso de la máquina aprox.: 0,4 tdimensiones de la máquina ca.: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

diámetro de torneado: 950 / 650 mmlongitud de torneado: 2000 / 2500 mmcontrol: HEIDENHAIN Manual Plus Diámetro del mandril de 3 mordazas: 800 mmrango de velocidad de torneado: 40 - 1000 U/minpotencia total: 35 kWpeso de la máquina aprox.: 12 tdimensiones de la máquina aprox.: 8 x 3 x 3,5 m12 x estación TorretaContrapunto2 x Transportadores de virutasPrecio EXW 17036 NeubrandenburgLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning diameter: 320 / 270 mmworkpiece length - max.: 620 mmcontrol: Mazatrol Smooth swing diameter: 300 / 172 mmworkpiece weight: kg------------ MAIN SPINDLE ------------: turning speeds: 5000 U/minpassage of spindle: 76 mmc-axis: 0,0001 spindle motor: 15 / 11 kWspindle nose: A2-6 travel -x axis: 175 / 111 mmtravel -y axis: 100 / 70 mmtravel -z axis: 520 / 580 mmrapid travel x/y/z: 30 / 26 / 40 m/min2nd Spindle:: spindle turning speed range: 6000 U/minspindle motor: 11 / 7,5 kWspindle nose: A2-5 spindle passage: 61 mmw-axis: 625 mmbar capacity: 65 mmtotal power requirement: 39,2 kVAweight of the machine ca.: 9,1 tdimensions of the machine ca.: 2,87 x 2,3 x 2,4 mHighly efficient CNC turning centre with 2 turrets / 2 spindles for driven tools and long Y-axis travel- Smooth CNC control- Main & counter spindle- 2 tool turrets-- 12-station tool turret (2x)-- Spindle for rotary tool: spi ...

turning diameter: 820 mmturning length: 2.000 mmcontrol: SIN 810 D center height over square guideway: 400 mmturning diameter over slide rest: 500 mmx-travel: 540 mmz-travel: 2.100 mmfeed x/z-axis: 0,01 - 50 mm/minrapid traverse X-axis: 5,00 m/minrapid traverse Z-axis: 10,00 m/minfeeding force facing: 12.500 Npower feed longitudinal: 20.000 Nspindle turning speed range: 6,4 - 1.600 U/minspindle turning speed - gearbox stage 1: 6,40 - 376 1/min.spindle turning speed - gearbox stage 2: 27,40 - 1.600 1/min.power capacity at 60% / 100 % load: 46,00 / 37,00 KWmax. torque at 60% / 100% load: 5.073 / 4.069 Nmconstant cutting rate: 1 - 9.999 m/min.spindle head DIN 55027 - Size: 11 spindle diameter in front bearing: 170 mmspindle bore: 128 mmtailstock quill taper MT: 6 diameter of quill: 125 mmquill stroke: 280 mmthread pitch: 0,1 - 400 mmtotal power requirement: 35,00 kWweight of the machine ca. ...

turning length: 1.300 mmspindle diameter: 120 mmspindle bore: 38 mmcontrol: SIEMENS - 840 D numbers of positions in the tool changer: 12 tool taper: VDI 30 CNC Turning- and Milling Center | NILES-SIMMONS - N10 equipped with Y-axis, turret for driven tools, steady rest, and tailstock.The machine is in well-maintained condition.For further technical details, please refer to the attached offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: N-10 | N 10 | N10/2 | N10-2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0554 mm: 370 mm: 2000 mm: 280 mm: 104 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm: 240 mm: 1250 mm: 190 mm: 54 mm: 5,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0400 mm: 246 mm: 1250 mm: 195 mm: 54 mm: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.