tornos usadas para la venta (2,807)

Diámetro de torneado: - mmLongitud de giro: - mmControl: - Consumo total de potencia: - kWweight de la máquina aprox.: - tDimensiones de la máquina ca.: - mEn nombre del clienteLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning diameter: 420 mmturning length: 650 mmcontrol: Okuma OSP-U100L spindle bore: 95 mmspindle turning speed range: 2800 U/mintravel -x axis: 300 mmtravel -z axis: 675 mmmain drive motor: 22/30 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: 2700 x 1900 x 1885 mmFirst put into operation 2001.- 12-station turret (VDI 40) with driven tool stations, 3,000 rpm, 5.5 kW- Internal extraction system by Hengst Filtration (year of manufacture 2023)- Touchsetter, tool measurement- C-axis (main spindle)- Tool breakage and wear monitoring- 3-jaw chuck, Kitagawa B210, Ø250- Tailstock- Coolant supply, also through the tool- IGF dialog programming- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diámetro de torneado: 100 mm longitud de giro: 75 mm. control: FANUC Oi-TF requerimiento total de potencia: 15 kWweight de la máquina aprox. dimensiones de la máquina aprox. m. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning diameter over bed: 1600 mmturning diameter over slide rest: 1280 mmturning length: 5000 mmcentre height: 800 mmspindle turning speed range: 1 - 200 U/minspindle bore: 105 mmspindle diameter in front bearing: 120 mmmain drive motor: 75 kWmax. workpiece weight between centres: 30000 kgworkpiece weight in steadies max.: 40000 kgbed slide rapid adjustment: 4000 mm/min.total power requirement: ca. 100 kWweight of the machine ca.: 52 tRefurbished in 2020 and equipped with:- 4-jaw faceplate Ø 1600- thread cutting- 4-fold heavy duty tool holder- Hardened tracks- tailstockdiffenret Steadies, chip conveyor and other accessories, available upon requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 256 mmturning length: 530 mmcontrol: Fanuc 31i-A turning diameter over bed: 550 mmturning diameter over cross slideways: 350 mmmain spindle:: max. turning speeds: 6000 min/-1Drive power - main spindle: 11 kWmax. torque: Nmmax. rod diameter: 45 mmspindle head: A2-5 chucking diameter: mmtool turret:: shaft height for square tool: 25 mmDrill shank diameter: 50 mmtravel:: x-axis: 210 mmz-axis: 560 mmfeeds:: rapid traverse: x 20 / z 24 m/mintotal power requirement: kWweight of the machine ca.: 7,7 tdimensions of the machine ca.: L 4,18 x B 2,01 x H 1,98 mTechnical Specifications:- Manufactured in 2017 but not put into operation until 2021- Fanuc 31i mod A CNC control- Y-axis- 20 bar tool cooling- Fedek bar loader- Chip conveyor- 12-station tool turret- 10 rotating toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Longitud de torneado: 1500 mm. Paso circular sobre la cama: 490 mm. Diámetro de giro sobre la corredera frontal: 280 mm. Control: Heidenhain Manual Plus Rango de velocidad - hasta: 3000 U/minspindle diámetro: 65 mm. Capacidad - Potencia de la pieza: 12/16 (100/60%) kWweight de la máquina aprox.: 3,5 tEquipo/Accesorios: - Reposaherramientas estable - Portaherramientas- Brocas- Consejos- Soporte multifijoLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning diameter over bed: 500 mmturning diameter over slide rest: 330 mmturning diameter in the gap: 600 mmturning length: 3000 mmbed width: 505 mmspindle bore: 72 mmspindle head: DIN 55022 Gr. 8taper in tailstock: MK 5 turning speed range: 22,4- 1120 U/minpower requirement: 18,5 kWdimensions: 5,3 x 1,75 x 1,53 mweight of the machine ca.: 5,2 tused lathe in nice condition with digital scale- 2 axis digital scale- 4 jaw chuck Ø 250 mm- 3 jaw chuck Ø 260 mm- Multifix C toolholder system- some toolholders- steadyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 390 mmturning diameter over slide rest: 190 mmturning length: 1000 mmturning dia. in gap: 460 mmspindle head: DIN 55026 Gr. 6spindle bore: 52 mmturning speed range: 11,2 - 2240 U/minpower requirement: 7,5 kWbed width: 355 mmdimensions: 2,8 x 1,3 x 1,6 mweight of the machine ca.: 1,9 tEquipment: - Multifix B with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jawsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 400 mmcentre distance: 3.000 mmmax. swing over bed: 810 mmmax. swing over facing slide: 510 mmmax. swing-dia. in gap: 850 mmcontrol: WEILER max. workpiece weight: 3.800 kgspindle diameter in front bearing: 150 mmspindle bore: 106 mmfaceplate diameter: 630 mmworktool system: Parat tailstock quill taper MT: 6 dia. of quill: 115 mmspindle turning speed - stepless: 1 - 1.800 U/minLathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor.A comprehensive tool package is included in the scope of delivery.The machine video from the production plant will be shared on request.The machine is in good condition and can be inspected under power at any time.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - ...

turning diameter: 300 mmturning length: 600 mmcontrol: FANUC, 18i-TB turning diameter over bed slide: 230 mmtravel x1: 165 mmtravel z1: 700 mmtravel x2: 190 mmtravel z2: 720 mmtravel -y axis: +/- 50 mmmain spindle bore: 76 mmmain spindle speed: 5.000 U/minmain spindle drive: 22 kWmax. torque on the spindle: 208 Nmsub spindle bore: 76 mmsub spindle speed: 5.000 U/minsub spindle drive: 22 kWmax. torque on the spindle: 208 Nmtool turret: 2 x 12 Stat.number of driven tool stations: 2 x 12 speed of driven tools: 5.000 U/minmax. torque: 47 Nmwork piece power: 5,5 kWC-axis resolution: 0,001 °rapid traverse x + z axis: 20 / 40 m/minrapid traverse y-axis: 7,5 m/mintotal power requirement: 68,4 kVAAccessories: collet fixture make KITAGAWA, CRS 66, on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret,  ...

turning diameter: 430 mmturning length: 1500 mmcontrol: OSP P300 turning diameter over bed: 670 mmturning dia. over face-slide: 480 mmWorkingspindle:: power capacity - main spindel: 30/22 kWturning speed range - main spindle: 0 - 3000 U/minmax. bar capacity: 95 mmspindle head: 11 JIS A-2 / ASA travel -z axis: 1500 mmfeed per revolution: 0,001 - 1.000 mmrapid traverse: 30 m/mintravel -x axis: 270 mmfeed per revolution: 0,001 - 1.000 mmrapid traverse: 25 m/minC-Axis: 0,001 °Rapids C - Axes: 200 min -1rapid traverse: 12 m/mintravel -y axis: 120 mmtotal power requirement: 29 kVAweight of the machine ca.: 8,6 tdimensions of the machine ca.: 4,3 x 2,25 mCCNC turning and milling centerequipped with:- CNC control OKUMA OSP P300- 12-fold Tool Revolver for driven tools- Tailstock- Chip conveyor- self-centering Chuck 315 mm Autoblock- 2 motorized radial modules- 2 axial modules for thermal expans ...

turning diameter over bed: mmturning diameter over slide rest: mmturning length: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 750 mmy-travel: 210 mmz-travel: 1150 + 100 mmcontrol: Fanuc MSX-701III Maximum turning diameter: 660 mmMax. turning length: 1498 mmDiameter over cross slide max.: 400 mmnumber of spindle speeds: 3000 U/mintool piece magazine with: 40 Plätzenturret: 10 Fachtotal power requirement: 90 kVAweight of the machine ca.: 26,6 tdimensions of the machine ca.: 5301 x 2997 x 2788 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 376 mmturning length: 760 mmcontrol: Fanuc x-axis: 260 mmz-axis: 830 mmtotal power requirement: kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diámetro de torneado: 430 mm, longitud de giro: 519-525 mm. control: Mori seiki MSX-805 eje x: 230 mmz. Eje: 520 mm, consumo total de potencia: kWpeso de la máquina, aprox. 4100 kg. Dimensiones de la máquina, aprox. m. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

: 0560 mm: 390 mm: 2000 mm: 280 mm: 80 mm: 11,25 kWspindle turning speed - stepless: 20-2000 U/minspindle taper: K 8 DIN 55027 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 376 mmturning length: 760 mmcontrol: FANUC I-Series Plus greates pass round over bed: 780 mmswing diameter over slide rest: 630 mmmax. turning diameter: 376 mmspindle turning speed range: 4000 U/minspindle drive motor: 22 / 15 kWspindle nose: ASA A2-8 spindle bore: 81 mmbar material dia.: 76 mmc-axis: 0,001 °chucking diameter: 255 mmNumber of tools: 12 St.travel -x axis: 260 (72 + 188 ) mmtravel -z axis: 830 mmtravel -y axis: 105 (+/- 52,5) mmdiameter of quill: 100 mmquill stroke: 100 mmtailstock taper MT: MT 5 total power requirement: 41,98 kVAweight of the machine ca.: 6,1 tdimensions of the machine ca.: 4,0 x 2,5 x 2,2 mCNC control FFANUC I-Series Plus- chip conveyor- driventools 5000U/min, 7,5kW- C-axis- hydraulic unit- tailstock- coolant 7 bar- bar loader interfaceCapto C3 straight chair: 2Capto C3 90° chair: 1ER20 Capto chuck: 10ER32 Capto chuck: 4Weldon-to-Capt ...

turning diameter over bed: 3750 mmturning diameter over slide rest: 3250 mmturning length: 15000 mmcentre distance: 15000 mmfaceplate: 3000 mmworkpiece weight: 120 tsteady: + 15t Rest: 2 main drive: 119 kWspindle bore: 105 mmspindle turning speed range: 0,33 - 75 U/minfeed in x - axis: 300 mm/minfeed in y - axis: 150 mm/mintailstock quill diameter: 500 mmtotal power requirement: ca 140 kWweight of the machine ca.: - tdimensions of the machine ca.: - m- 2-Carriages- Face Plate 3000mm- 6-Steady Rests- 4-Way Bed Construction- Taper Attachment- Inch/Metric Threading- Tailstock With Live CenterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm: 215 mm: 1000 mm: 180 mm: 42 mm: 2,25/3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm: 215 mm: 1000 mm: 180 mm: 42 mm: 3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diámetro de torneado: 550 mm. Longitud de giro: 1500 mm. Control: Fagor 8055 eje x: 108 mmz. Eje: 3000 mm. Consumo total de potencia: kWpeso de la máquina. ca.: tdimensiones de la máquina ca.: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Diámetro de torneado: 400 mm Longitud de giro: 1000 mm diámetro de oscilación sobre la corredera de la cama: 400 mm Diámetro de giro sobre la corredera: 225 mmbed Anchura: 433 mm diámetro del husillo: 56 mm Potencia total: 7,4 kWweight de la máquina aprox: 2,8 tDimensiones de la máquina aprox: 2,5 x 0,9 x 1,3 m Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning diameter: 500 mmturning length: 1000 mmcontrol: MONFORTS CONTROL control: SYSTEM EURO TURN turning diameter over bed slide: 290 mmspindle bore: 70 mmspindle turning speed range: 3 - 2800 U/minspindle power: 15 kWmax. torque on the spindle: 1530 Nmspindle head: DIN 55027 Gr. 8 feed power X/Z axis: 11300 Nrapid travel - longitudinal/face: 10 / 5 m/minbed width: 360 mmtravel of cross-slide: 265 mmupper slide travel: 140 mmturning tool - shaft cross cut: 32 x 25 mmtailstock quill diameter: 80 mmtailstock quill stroke: 160 mmtailstock taper MT: 5 total power requirement: kWweight of the machine ca.: 3,1 tAccessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diámetro de torneado: 5-42 mm longitud de giro: 3200 mm. control: Traub TX8i eje x: 50 mmz. Eje 50 mm: 50 mm. Potencia total: kWpeso de la máquina, aprox. 4000 kg. Dimensiones de la máquina circunstamente: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Diámetro de torneado: 1,320 mmLongitud de torneado: 5000 mmDiámetro de oscilación: 1250 mm, peso de la pieza: 14 Diámetro de torneado sobre corredera: 900 - 950 mm, consumo total de potencia: 45 kWweight de la máquina, aprox. 18 t. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Diámetro de giro sobre la cama: 340 mm Diámetro de giro sobre el soporte de la corredera: 177 mm longitud de giro: 630 mm velocidad de giro del husillo - sin escalones: 55-3000 U/peso mínimo de la máquina aprox. 1,55 tdimensiones de la máquina aprox: 2 x 1 x 1,6 mLectura digital HEIDENHAINMisc.accessorieswww.marcels-maschinen.ch Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning diameter: 400 mmturning length: 635 mmcontrol: Heidenhain Eltropilot greates pass round over bed: 570 mmtravel -x axis: 220 mmtravel -z axis: 635 mmmain spindle bore: 79 mmdrive of main spindle: 21 kWmax. torque on the spindle: 240 Nmmain spindle speeds:: 25-5.000 turning speed range - C-axis: 100 U/minworkpiece system 12-station turret head: feed power in the axis x + z: 3,5 / 7 Nrapid traverse X-axis: 20 m/minrapid traverse Z-axis: 24 m/mincoolant device with chip conveyor: total power requirement: 44 kvaweight of the machine ca.: 6 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 4.000 mmtravel -x axis: 4.500 mmtravel -z axis: 600 mmcontrol: Siemens Sinumerik 840D-sl feed range: 0 - 8.000 mm/minturning speeds: 1) 0,7 - 5,6 U/minturning speeds: 2) 2,8 - 22,4 U/minturning speeds: 2,1 - 56 U/mintool taper: Sauter Facing Lathe | ZERBST - DP05/W08 Scope of delivery:- Chip conveyor- Hydraulic unitThe ZERBST - DP05/W08 has been retrofitted in 2010.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DP05W08 | DP05 W08 | DP05-W08The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 815 mmturning length: 3000 mmcontrol: ECS 2402 swing over bed: 815 mmcentre distance: 3000 mmswing diameter over slide rest: 485 mmspindle bore: 137 mmspindle turning speed range: 1200 U/minrapid traverse: 5 m/minspindle motor: 28 kWtailstock quill diameter: 115 mmtailstock quill stroke: 250 mmtotal power requirement: 30 kWweight of the machine ca.: 7,0 tdimensions of the machine ca.: 5,87 x 2,10 x 2,10 mEquipment: CNC-control E.C.S. 2402 3-jaw chuck 4-jaw faceplate, diameter 700 mm 4-jaw faceplate, diameter 400 mm 3 Steady rests Chip ConveyorWithout boring bar holder and boring bar.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diámetro de torneado: 330 mm Longitud de giro: 650 mm Velocidad de giro del husillo - sin escalones: 30-5000 U/minspindle Taper: ASA A2-5 control: FANUC 18i-T Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.