tornos usadas para la venta (2,942)

Año de construcción 2019 Control Celos con Siemens 840D sl Operar incluyendo 21.5 ERGOline Control Viajar Eje X: 490 mm Eje Y: 250 mm Eje Z: 1.300 mm Eje B: +120 a -120 Diámetro máx. de torneado 500 milímetros Longitud máx. de torneado 1.200 milímetros Husillo principal ISM102 Potencia de accionamiento: 37/28 kW Par máx.: 700/800 Nm Velocidad máx. del husillo: 4.000 rpm Paso máx. de la barra: 104 mm Subhusillo ISM52 Potencia de accionamiento: 14,5 kW Velocidad máx. del husillo: 6.000 rpm Husillo de fresado Potencia de accionamiento: 22 kW Velocidad máx. del husillo 12.000 rpm HSK-63A DIN69893 Almacén de herramientas 80 posiciones de herramienta Otros equipos Interfaz para robots Escalas de vidrio en los ejes X, Y y Z MP 1.0 – Control de protección de la máquina Sondas de herramientas Sonda de pieza, BLUM TC60 Clasif ...

Key data: 660 mm, 1495 mm

Matriz de Mazatrol Diámetro máx. de rotación 660 milímetros Longitud máx. de torneado 1.495 milímetros Viajar Eje X: 580 mm Eje Y: 150 mm Eje Z: 1.545 mm Eje W: 1.490 mm Eje B de -30 a 210 Desplazamiento rápido X/Y/Z/W 50/40/50/30 m/min Husillo principal Potencia de accionamiento: 22 kW Velocidad máx. del husillo 4.600 rpm Eje C Paso máx. de la barra: 65 mm Subhusillo Potencia de accionamiento: 18,5 kW Velocidad máx. del husillo 5.000 rpm Eje C Husillo de fresado Potencia de accionamiento: 18,5 kW Velocidad máx. del husillo: 12.000 rpm Eje B: 0,0001 Capto C6 Almacén de herramientas / ATC 120 posiciones de herramienta Diámetro máx. de la herramienta: 90/125 mm Longitud máx. de la herramienta: 300 mm Peso máx. de la herramienta: 10 kg Torreta inferior Torreta de tambor 9 estaciones de herramientas 6 estaciones de herramie ...

Key data: 750 mm, 1524 mm

Control Matriz de Mazatrol Diámetro máx. de rotación 760 milímetros Longitud máx. de torneado 1.524 milímetros Viajar Eje X: 630 mm Eje Y: 230 mm Eje Z: 1.585 mm Eje W: 1.530 mm Eje B de -30 a 210 Desplazamiento rápido X/Y/Z/W 50/40/50/30 m/min Husillo principal Potencia de accionamiento: 30 kW Velocidad máx. del husillo 3.300 rpm Eje C Paso máx. de la barra: 102 mm Subhusillo Potencia de accionamiento: 26kW Velocidad máx. del husillo 4.000 rpm Eje C Husillo de fresado Potencia de accionamiento: 18,5 kW Velocidad máx. del husillo: 12.000 rpm Eje B: 0,0001 Capto C6 Almacén de herramientas / ATC 80 posiciones de herramienta Diámetro máx. de la herramienta: 90/125 mm Longitud máx. de la herramienta: 400 mm Peso máx. de la herramienta: 10 kg Equipamiento especial Enfriamiento por el husillo Bomba de alta presión 70 bar 2 ...

turning diameter over bed: 1800 mmturning diameter over slide rest: 1450 mmturning length: 940 mmbed width: 1040 mmturning speeds: 2,35-118 U/minfaceplate diameter: 1400 mmturning dia. in gap: 2450 mmTravel: 1200 mmDistance between the canter 7000mmFaceplate diameter 1400urning diameter in the offset 2450, length 940 mmTravel over support 1200Over support with autom. travelThe tech. Data are manufacturer or operatorinformation and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward ...

turning diameter: 325 mmturning length: 1000 mmswing diameter over bed slide: 250 mmSwingdiameter in the bed bridge: 440 mmreus: 12 (85-2000) U/mintail stock: MK 3 quill stroke: 100 mmdiameter of quill: 40 mmspindle taper: DIN 55027 Nr. 5 spindle bore: 32 mmfeed: längs 0,006 - 1,77 m/minfeed: quer 0,003 - 0,885 m/mintotal power requirement: 2,2 kWweight of the machine ca.: 770 kgdimensions of the machine ca.: 2150 x 950 x 1350 mmFurnishing:- Cooling device- Machine light- chip rear wall- Spindle protection- Lathe chuck protection- Tool holder protection- Foot pedal with braking function CE- Interchangeable gearsincl. Optional equipment- 3-jaw chuck Ø 160 mm type 3204/ DIN6350, BISON- MULTIFIX quick-change holder type A, incl. 4 tool holders- 2-axis digital display DRO NewallThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 660 mmturning length: 1500 mmcontrol: FAGOR centre height: 330 mmspindle passage: 82 mmnumber of spindle speeds: 30-2000 U/minbed width: 390 mmrapid speed: X/Z 4 - 8 m/mintailstock quill diameter: 75 mmMain spindle capacity: 15 kWweight of the machine ca.: 3200 kgdimensions of the machine ca.: 3800 x 1800 x 2150 mFirst commissioned in 2015, very good condition- FANUC Series 18i TB Control, Manual Guide i Function- Central control panel for machine and CNC control on the pedal arm 45 ° swiveling- 12-fold tool turret- Fanuc drive with 30 kW (50% ED)- Chip conveyor- Bezel- 3 jaw chucksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 420 mmturning length: 1500 mmswing diameter over bed slide: 250 mmSwingdiameter in the bed bridge: 590 mmcentre height: 210 mmTurning length in the bed bridge: 260 mmreus: 16 (45-1800) U/mintail stock: MK 4 quill stroke: 120 mmdiameter of quill: 50 mmspindle taper: DIN ISO 702-2 Nr. 6 spindle bore: 52 mmspindle cone: MK 6 feed: längs 17 / 0,05 - 1,7 m/minfeed: plan 17 / 0,025 - 0,85 m/mintotal power requirement: 4,6 kWweight of the machine ca.: 1340 kgdimensions of the machine ca.: 2440 x 915 x 1375 mmFully equipped master and feed spindle lathes. TH 4215 withdigital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway- Spindle mount Camlock DIN ISO 702-2 No. 6- Precisely crafted slide- Hand wheels with adjustable fine scaling 0.04 / 0.02 mm- Quadruple steel holder- All guides can be adjusted using V-ledges- Adjustment range top slide ± 90°- Guar ...

turning diameter over bed: 630 mmturning diameter over slide rest: ? mmturning length: 1500 mmturning speed range: 7 - 1400 U/minspindle bore: 80 mm3-jaw chuck: FORKARDT F 500 tool holder: Multifix C total power requirement: 17 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 3,5 1,5 1,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diámetro de torneado: 400 mmlongitud de torneado: 600 mmcontrol: Turn Plus CNC Pilot 3190 requisito de potencia total: 44 kVApeso de la máquina aprox.: 5 tdimensiones de la máquina aprox.: 6 2,5 2 mLa máquina ha estado en uso hasta ahora (torneado de 2 ejes)Defectos conocidos:- Herramientas accionadas sin función- Fugas de contrapunto - Fuera de servicio- Problemas esporádicos hidráulicos / fugas

turning diameter: 760 mmturning length: 3000 mmswing diameter over bed slide: 520 mmcentre height: 380 mmreus: 17 (7,5 - 1015) U/mintail stock: MK6 quill stroke: 225 mmdiameter of quill: 105 mmspindle bore: 132 mmfeed: längs 0,039 - 18 mm/minfeed: quer 0,02 - 9 mm/mintotal power requirement: 15 kWweight of the machine ca.: 4700 kgdimensions of the machine ca.: 4900 x 1650 x 1650 mm- Coolant device- Machine light- Chip back wall- Spindle protection- Lathe chuck protection- Tool holder protection- Interchangeable gearsSpecial equipment- 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON- MULTIFIX quick-change holder type B, including 4 tool holders- 3-axis digital display DRO Newall- Foot pedal with brake function CEThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 380 mmturning diameter over slide rest: 190 mmturning length: 1000 mmtotal power requirement: 7,5 kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: 2,511,5 mNo. 52911 used lead and feed spindle lathe WEILER Commodor 75 GSworking range: Ø 380/190 x 1000 mmdrive: 7,5 kWdigital displayspindle bore 56 mmSpeed range 13 - 2000 min-13-jaw chuckMultifix BChip traydocumentationSpace requirement approx. 2.5 x 1 x 1.5Weight approx. 1700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Fanuc 21T Diámetro de torneado 158 mm Diámetro circunferencial sobre la cama 340 mm Velocidad 6.000 min-1 Revólver de 8 velocidades Contrapunto mandril de 3 mordazas, mandril de 2 mordazas, mandril de pinza Collares Portaherramientas versátiles

A Gildemeister CNC double-spindle turning and milling center including coolant system and chip conveyor is available. Turning diameter over bed: 640mm, machining diameter: 400mm, center distance: 1930mm, travel X/Z: 550mm/1585mm, travel Y: +/-110mm, B-axis: +/-120° (interpolating), C-axis: 360°. Main spindle: power: 36kW/45kW, speed: 4000rpm, torque: 600Nm-730Nm, bore: 107mm. Milling spindle: Speed: 12000rpm, power: 13.2kW/22kW, torque: 100Nm. Tool places: 60, carrier: turret 12-fold star SW 380, machine dimensions X/Y/Z: approx. 9300mm/4600mm/3100mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible.

Hay tres tornos horizontales CNC Okuma disponibles. 1) Okuma LB 15 m. 2) Okuma LB 15. 3) Okuma LB 15 W. El Okuma LB 15 W está defectuoso. Es posible la inspección in situ. Posibilidad de venta individual.

turning diameter over bed: 420 mmturning diameter over slide rest: 290 mmturning length: 900 mmturning diameter in the gap: mmturning speeds: 40 - 2000 U/mincentre height: 210 mmspindle bore: 38 mmtotal power requirement: 4,0 KWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 2,4 x 1,1 x 1,3 mLead and feed spindle lathe- 3-jaw chuck 220mm- Quick-change tool holder with 5 cassettes- Steady rest- Chip tray- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Aufnahmen Divers K50 Diámetro: 50 mm:

: . Distancia entre ejes: 3000 mmDiámetro máximo de giro: 660 mmMultifix: . constante: 2 Stück peso de la máquina aprox.: 5 t: KW 39/2022

turning diameter over bed: 820 mmturning diameter over slide rest: 600 mmturning length: 5000 mmfaceplate: 750 mmspindle passage: 125 mmturning speeds: 9-450 U/minRapid travel: steady for max. workpiece diameter from: 520 mmsteady for max. workpiece diameter from: 330 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mNo. 59The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to you ...

serial number: 31302 control: Fanuc with double spindles: x turning diameter: max. 600 mmx-travel: 1000 mmwith magazine: x extensive accessories: ca. 100 Aufnahmen, auch angetriebenweight of the machine ca.: 13 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2800 mmswing diameter: 3200 mmturning height: 1500 mmslide adjustment: 1200 mmturning speeds: 50 U/minControl: Sienens 840 Dside head - cross travel: 900 mmpower capacity: 55 kW: workpiece weight: 16 ttotal power requirement: kWweight of the machine ca.: 50 tdimensions of the machine ca.: mThe engine was rebuilt in 2008/2009 to CNC control Siemens 840 D.The right support is operated CNC and the face plate. The left side of the support and assistance are conventional. Acu Rite Digital DisplayThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, produc ...

faceplate diameter: 2500 mmswing diameter: 2865 mmturning height: 3000 mmControl: R & D type: MTC 4 Rest: 2 slide adjustment: 1500 mmturning speeds: 140 U/mintool change unit: 12 Pos.total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMachine is modernizedThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with Modul ...

turning diameter over bed: 50 mmspindle passage: 26 mmturning length: 275 mmtotal power requirement: 12 kWweight of the machine ca.: 4500 kgCNC-Sliding Headstock Lathe, Opposite HeadstockThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1600 mmswing diameter: 2100 mmturning height: 1700 mmControl: R & D type: MTC 4 turning speeds: 280 U/minworkpiece weight: 20000 kgTool changer: 14 Pos.: total power requirement: kWweight of the machine ca.: 2800 tdimensions of the machine ca.: 3,7x3,75x5,1 mMachine is modernizedThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created wi ...

turning diameter: 570 mmturning length: 2000 mmcontrol: total power requirement: 15 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1250 mmswing diameter: 1500 mmturning height: 1250 mmControl: Siemens type: 840 Dsl tool taper: 4 Pos.total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe machine was overhauled in 2015 by Matuschek.Siemens 840 DSL Shop TurnThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the ...

turning diameter over bed: 920 mmturning diameter over slide rest: 720 mmturning length: 4000 mmturning speeds: 1,4-280 U/mindigital readout: Acurite : steady: 640 steady: 500 faceplate: 900 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the s ...

turning diameter: 570 mmturning length: 2000 mmcontrol: Siemens Sinumeric steady: chip conveyor: turning dia. in gap: 600 mmturning diameter over slide: 340 mmspindle bore: 63 mmTool changer: total power requirement: 22 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3,5x1,5x1,5 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ...

: : VDI 20 : number: 3 Stück im Paket : Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: 840 C control: 2x 840 D : Kühlmittelsystem chip conveyor: ja kWgenerator - rated current: 95,00 Aconnected load: 65,00 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 410 mmturning diameter over slide rest: 240 mmturning length: 1000 mmturning diameter in the gap: 530 mmturning speeds: 65 - 1810 U/mincentre height: 205 mmspindle bore: 52 mmtailstock quill taper MT: 4 total power requirement: 2,2 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,9 x 0,8 x 1,3 mCenter lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.