tornos usadas para la venta (3,073)

Center height: 450mm, distance between centers: 3000mm, fuse protection: 630A, rated current: 46A, control voltage: 220V, operating voltage: 380V, frequency: 50Hz, connected load: 22,5kW, weight: 6,1t, with four-jaw chuck (diameter: 800mm), tailstock, quill and three steady rests. An on-site inspection is possible.

Varios portaportaobjetos de cambio rápido / portaobjetos de cambio rápido / accesorios en total 42 PCS: 7 piezas WDL 4/50 16 WDR 4/40 10 piezas WDL 4/40 3 piezas WB 4/60⌀ 3 piezas. WBW 4/60⌀ 1 pcs. WBW 23/60⌀ 2 piezas sin tipo Por favor, háganos saber qué artículos le interesan para recibir una oferta. Estamos encantados de proporcionarte más fotos.

Aquí tenemos una Weiler DZ 65, torreta Duplomatic Popa de 16 pliegues, 2 husillos, cabeza de pineta para ambos huses, herramienta accionada en todos los puntos de Rev, Transportador de astillas, refrigerante a través de 2 husos, eyector de resorte en segundo husillo, conexión del alimentador de varillas, retirada de piezas mediante bandeja de goteo, cinta transportadora de piezas, varios tubos de inserción en el husillo, transportador de astillas, alimentación de material Irco Profimat 3m,

Lathe Gildemeister NEF 320 K BJ 2002

Lathe Gildemeister CT 60 BJ 1990

Centro de giro vertical de dos husillos - Control Siemens 840 D - Camilla de máquina VSC 400 Duo - 2 torretas de disco de 12 x diámetro 40 mm, accionadas - 2 estaciones adicionales de perforación y afondado - Sistema abierto de transporte de piezas - Unidad de transferencia y torneado - Interfaz con un sistema de manejo externo - Centro central de refrigeración, bomba de alta presión 70 bar - Soplado del dispositivo de recogida y de los dispositivos de sujeción - Medición de la pieza - Monitorización de herramientas - Opción de red Emag - Gestión de herramientas hermanas Diámetro circunferencial: 260 mm X-travel 860 mm Z-recorrido 200 mm Husillo principal 2 Velocidad máxima hasta 4500 1/min Espaciado entre husillos 1055 mm Atracción principal 2 Motor AC Asincrónico 6ß/100% ED 39/28 KW Par máximo 460 Nm Travesía rápida x/ z 45/ 30 m/min

Cross slide NC1-left, X1-axis: 450mm, cross slide NC1-left, Z1-axis: 1980mm, cross slide NC2-right, X2-axis: 450mm, cross slide NC2-right, Z2-axis: 1980mm, M-head slide-left, Q1-axis: 1980mm, M-head slide-right, Q2-axis: 1980mm, tailstock + steady rest slide-left, W1-axis: 1980mm, tailstock + steady rest slide-right, W2-axis: 1980mm, Y-axis: +/-65mm, workpiece length: 760-3000mm, workpiece clamping diameter: 20-200mm, main drive power: 2x 37kW, main drive speed (stepless): 0-2200/min, tool drive speed (stepless): 0-2320/min, tool holder: VDI50, tailstock center: MK 5, number of tool holders: 12, steady rest: SLU-5 SO, steady rest clamping diameter: 20-200mm, working height: 1300mm, max. workpiece diameter: 20-200mm, max. workpiece weight: 250kg, workpiece drive/clamping: 2x hydraulically operated SAV front-end chucks, max. chuck through-bore diameter: 210mm, spindle power: 2x 37kW, max.  ...

A CNC lathe Optimum is offered. Swing over bed/cross slide: 300mm/200mm, distance between centers: 430mm, X/Z travel: 145mm/465mm, X/Z rapid traverse: 10m/min/12m/min, bar capacity: 30mm, spindle bore: 30mm, max. spindle speed: 4000rpm, tool stations: 6, control: Siemens SINUMERIK 808D ADVANCED. Machine dimensions X/Y/Z: approx. 1655mm/1590mm/1955mm, weight: approx. 832kg. An on-site inspection is possible.

Workpiece length: 700-2400mm, workpiece diameter: 50-200mm, main spindle drive power: 2x 37kW, max. chuck through-bore: 210mm, chuck piston stroke: 25mm, chuck stroke per jaw: 11.1mm, max. chuck actuating force: 52.5kN, max. chuck actuating pressure: 30bar, max. chuck speed: 2000/min, loading and unloading unit range: 2600mm, center clamping head travel: 1200mm, center clamping head stroke: 1200mm, main fuse: 315A, connected load: 150kW, overall length: approx. 10,640mm, main section length: 6800mm, width: 2370mm, height: 2860mm, overall height including superstructure: 3450mm, operating hours: 3143h. With chip conveyor, loading and unloading unit, fixed center clamping head, movable center clamping head, control panel, ILT air cleaner, electrical cabinet, hydraulic cabinet, coolant tank for motor cooling and coolant tank for tool cooling and documentation. Partially overhauled by the ma ...

Machining processes: drilling, turning, milling, axes: Z3 longitudinal slide tool turret, Z4 longitudinal slide tool turret, X3 cross slide tool turret, X4 cross slide tool turret, C1 workpiece drive, C2 workpiece drive, K5 turret swivel axis, K6 tool drive, K7 turret swivel axis, K8 tool drive, travel X3: 251mm, X4: 251mm, Z3: 662mm, Z4: 662mm, tool turret: 12-station radial, DIN 69880-VDI40, drive: DIN 5480-W20x0.8, tool swing diameter: 580mm, specified dimension at tool area: 320mm, length: 13,000mm, width: 7300mm, height: 4100mm, weight: 22t, operating hours: 14,748h. Equipment: OP012 control panel, Kuka handling robot, chip conveyor, coolant tank, hydraulics, pneumatics, electrical cabinet, parts infeed and outfeed, documentation, installation plan, working area diagram, gearbox plan and transport plan. The following components should be overhauled: machine bed (guideways/ball screw ...

turning diameter over bed: 500 mmturning diameter over slide rest: 300 mmturning length: 1000 mmtotal power requirement: ? kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,511,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Traub TNX 65Year of manuf. : 2011 Control : Mitsubishi TX8i-s ____________Description:Mainspindle:Technology:MotorspindleSpeed:5.000 rpmPower:22,6 kWTorque:180 NmBarcapacity:65 mmWorkpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65Subspindle:Technology:MotorspindleSpeed:5.000 rpmPower:22,6 kWTorque:180 NmWorkpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65Ejector:Hydraulic with flushToolcarrier I (X/Y/Z):Technology:Turret with 10 stationsTaper:VDI30Tooldrive:6.000 rpm, 5,5 kW, 17,5 NmMovement in X/Y/Z:175/80/650 mmRapid travers in X/Y/Z:20/20/40 m/minToolcarrier II (X/Y/Z):Technology:Turret with 10 stationsTaper:VDI30Tooldrive:6.000 rpm, 5,5 kW, 17,5 NmMovement in X/Y/Z:175/80/650 mmRapid travers in X/Y/Z:20/20/40 m/minToolcarrier III (X/Y/Z):Technology:Turret with 10 stationsTaper:VDI30Tooldrive:6.000 rpm, 5,5 kW, 17,5 NmMovement in X/Y/Z:175/80/650 ...

Turning diameter: 500 mm, swing diameter over the cross slide: 290 mm, turning length: 1500 mm, spindle speed: 8 to 2800 rpm with three gear ranges, spindle bore diameter: 70 mm, three-jaw chuck diameter: 250 mm, tailstock quill taper: MT4, quill travel: 180 mm, connected load: 24 kVA, control system: Heidenhain Manual Plus, length: 3200 mm, width: 1700 mm, height: 1800 mm, weight: 3.2 t, operating hours: 42,733 h. The machine is equipped with a manual tailstock, chuck guard, coolant system, Multifix tool holder, various tool holders, various drill chucks, various turning and drilling tools, interchangeable jaws for the three-jaw chuck, a depth stop for the main spindle, a tool cabinet and documentation. The machine was completely overhauled by the manufacturer in 2010. An on-site inspection is possible.

La máquina tenía mantenimiento anual por parte de Okuma Centro de torneado y fresado CNC con 9 ejes CNC, Okuma MacTurn 350 W, Año de fabricación 2004, OSP-E 100L, Revista adicional, Compartimento de 80 Ww para el polvorín, Husillo principal con eje C, husillo contrario con eje C, Eje deslizante y superior / husillo de fresado, Montando HSK 63, Eje B escalonado como eje de fresado, Ancho central 1500 mm, Diámetro del husillo de 80 mm, Circulación máxima: 550 mm, Giratorio 350 mm, Revólver inferior de 12 capas con revólver aplicado. herramientas, Sistema de Filtros Compactos Interlite 900 l, succión, Tiempo de funcionamiento del husillo aprox. 18300 h, Päneförderer, Brazo de agarre del cambiador de herramientas completamente renovado, Refrigeración a alta presión, Brazo medidor WZG, Cambiador de herramientas revisado, Husillo principal Kitagawa B - ...

Weiler DZ 40, Año de fabricación 2008, Control Siemens 840 D, Travel X/Z 200/350 mm, Diámetro de giro 180 mm, Bobmkney Ev Iujrzedf Circulación Ø máx. 560 mm, Eje Y +/- 25 mm, Eje Q / pau trasero programable, El eje Q recorre 360 mm, Sistema de medición en el eje Q rotativo, Contrapunta MK 4, Máximo paso de caña del husillo principal 42 mm, Diámetro del husillo 52 mm, Travesía rápida X/Z/Q 30/30/20 m/min, Torreta 16 velocidades - todas las estaciones accionadas, VDI 25, Diámetro del eje 25 mm, Solicitado. Herramientas de hasta 4.500 rpm, Bandeja de piezas, accesorios, Solicitado. Portaherramientas, Sostenidores rígidos,

Maestro de Gremio CTX 510 Control: Siemens 840 D con Taller - Giro Año de fabricación: 2004 Viaje X / Z: 300 / 1050 mm Revólver: 12 velocidades Portaherramientas: VDI 40 Bsbmezmxz Roknrzodf Velocidad del husillo hasta a: 3.500 rpm Paso de barra: 90 mm Recorrido de la pluma: 150 mm Contrapunto Refrigeración a 20 bar Tamaño del mandril 315 mm Horas aproximadas del husillo: 14.000 Se produjeron lotes de 0 a 5 en la máquina La programación se realizaba en la máquina

This 4-axis Mazak QTN-200M was manufactured in 2004. It features a maximum turning diameter of 380 mm and a maximum swing diameter of 675 mm. The machine is equipped with a powerful main spindle that reaches speeds of up to 5,000 rpm and a robust tool turret with 12 positions. If you are looking to get high-quality turning capabilities, consider the Mazak QTN-200M machine we have for sale. Contact us for further details.

Manual lead screw and feed rod lathe manufactured in 2018. This Optimum TH 4610 features a distance between centers of 1060 mm and a swing over bed of 460 mm. It has a spindle speed range of 25 – 2000 U/min and can handle a maximum workpiece weight of 300 kg. If you are looking to get high-quality turning capabilities, consider the Optimum TH 4610 machine we have for sale. Contact us for further details.

Poder del usuario

A Krewema CNC large-format semi-frontal lathe is available. X/Z travel: 1500mm/850mm, center height: 475mm, distance between centers base/bed extended: 1685mm/2685mm, max. turning diameter over bed/cross slide: 935mm/620mm, max. swing diameter in the gap: 1600mm, main spindle bore: 155mm, tailstock quill diameter: 140mm, quill taper: MK6, quill stroke: 300mm, tool turret: Sauter, tool stations: 4, 3-jaw chuck diameter: 630mm, faceplate: Schunk, faceplate diameter: 1000mm, control: Siemens 840D sl ShopMill. Including coolant system, external coolant nozzles and chip conveyor. Documentation available. An on-site inspection is possible.

Horizontal turning machine manufactured in 2018. This Weiler PRIMUS VCD features a connected load of 7.5 kVA and operates at a nominal current of 15.5 A. With a machine weight of 1050 kg, it is designed for robust performance. If you are looking to get high-quality turning capabilities, consider the Weiler PRIMUS VCD machine we have for sale. Contact us for further details.

A Xiangfan/SPARK CNC large-format engine lathe is available. Swing diameter over bed/cross slide: 2200mm/1800mm, bed width: 1100mm, distance between centers: 8000mm, max. turning length: 7500mm, max. workpiece weight: 20t, max. workpiece weight between centers: 19t, main spindle bore: 140mm, bar capacity: 100mm, spindle speed: 200rpm, X/Z-axis travel: 920mm/7500mm, feed rate: 2m/min, rapid traverse: 3m/min, tool stations: 4, chuck jaw count: 4, chuck diameter: 2200mm, chip conveyor length: 8000mm, control: Siemens SINUMERIK 802D. Including coolant system, mandrel, chip conveyor and measuring system. Documentation available. An on-site inspection is possible.

Control Philips B2T Diámetro circunferencial: 640 mm Diámetro de mecanizado longitudinal 550 mm Diámetro de mecanizado en la torreta de tambor 450 mm Longitud de torneo 1000 mm Velocidad del husillo: 2.240 min-1 Diámetro del husillo 103 mm Torreta de tambor de 12 velocidades VDI 60 Transportador de astillas

Key data: 110 mm, 450 mm, 5600 1/min

Año de fabricación 1996 Control: TX8 F incluyendo el alimentador Simag de 42,1 bares Año de construcción 2003 El alimentador de barras es un máximo de aproximadamente 3,2 m para 3 m de barras. Con muchos accesorios La máquina sigue bajo energía y disponible con poca antelación

turning diameter: 720 mmturning length: 4000 mmcontrol: Siemens 805 turn - diameter over facing slide: 360 mmspindle diameter: 100 mmspindle passage: 100 mm3-jaw-chuck diameter: 400 mm4-jaw-chuck diameter: 250 mmsteady: 360 mmtotal power requirement: 22 kWweight of the machine ca.: tdimensions of the machine ca.: mIncluded:4-jaw turrets and coolant.The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Ma ...

turning diameter over bed: 1300 mmturning diameter over slide rest: 900 mmturning length: 8000 mmspindle diameter: 153 mmtotal power requirement: 37 kWweight of the machine ca.: tdimensions of the machine ca.: mTurning length (mm) 8000Max. turning diameter (mm) 1300Max. turning diameter over slide (mm) 900Max. turning diameter in the offset (mm) 1580Spindle diameter (mm) 153Speed 7 - 500 (12x)kW 37Voltage 400VHz 50Powered tailstock, powered quill, coolant system, 4-jaw chuck Ø 1,000 mmSteady rest roller type Ø 60 - 300 mmSteady rest roller type Ø 200 - 600 mmTaper turning attachment, 4-way toolpostThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,0 ...

spindle passage: 230 mmturning diameter over bed: 970 mmturning diameter over slide rest: 720 mmControl: Fanuc OiTD turning length: 2200 mmtotal power requirement: 37 kWweight of the machine ca.: tdimensions of the machine ca.: mYear of manufacture 2013Control: Fanuc OiTDOther controls possibleTurning length (mm) 2200Max. turning diameter (mm) 970Max. turning diameter over slide (mm) 720Spindle diameter (mm) 230Diameter range (mm) 850Speed: 500kW 37Voltage: 400VHz 50Including:4-jaw chuck, Ø 800 mm rearPneumatic 3-jaw chuck, Ø 600 mm frontThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interest ...

turning diameter over bed: 1150 mmturning diameter over slide rest: 800 mmturning length: 6300 mmspindle diameter: 100 mmspeed: 4-800 (x24) U/minturning dia. in gap: 1500 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mRapid toolpostPower compoundRapid traverse4-jaw chuck ø (mm): 800Fixed steady rest ø (mm): 2x 400Through-spindle coolingThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We lo ...

swing diameter: 2200 mmcentre distance: 9500 mmturning diameter over bed: 2200 mmworkpiece weight: 70 tturning speeds: . U/min4-jaw-chuck diameter: 2100 mmcontrol: Siemens type: Sinumerik 850 T mmtransmission ratio: . total power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: mSingle CarriageTailstockHydrostatic BedChip ConveyorSerial Number: 27486The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look  ...

turning diameter over bed: 4000 mmturning diameter over slide rest: . mmturning length: 5000 mmtotal power requirement: 30 kWweight of the machine ca.: . tdimensions of the machine ca.: . mSpecificationsTurning length (mm) 5000Max. turning diameter (mm) 4000Max. turning diameter at offset (mm) 5000Speed 1.4 - 71 (18x)kW 30Voltage 380VHz 50Including:4-jaw faceplate Ø 3150 mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forwa ...