trabajo con chapas de metal usadas para la venta (3,272)

Ancho de hoja - máximo: 0280 mmbobina Peso: 1.00 tbobina diámetro interno: 290 - 570 mmbobina exterior - diámetro aprox. 1000 mm0: 42 U/min Potencia total: 1,10 kWweight de la máquina aprox. dimensiones de la máquina aprox: 1,30 x 1,00 x 1,45 mUnidad de control faltantefreno mecánico provisionalmente conectado Los datos para este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.

: gebraucht : WA0013 : 265 €: 1 : 835 mm: 80 mm: 12 mmmint condición Los datos de este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.

Horario de trabajo láser encendido: 50921 h Horas de trabajo haz encendido: 21717 h Potencia láser: 3200 vatios Láser de rango de trabajo: 4000 x 2000 x 115 mm Máximo acero: 20 mm Máximo acero inoxidable: 12 mm Máximo aluminio: 8 mm Longitud: 11600 mm Ancho: 5300 mm Altura: 2200 mm Peso de la máquina: 16000 kg Carga eléctrica conectada: 73 kVA

Horario de trabajo máquina: 23304 h Horario de trabajo láser encendido: 22804 h Horario de trabajo haz encendido: 10185 h Potencia láser: 4400 Watts Rango láser de trabajo: 3000 x 1500 mm máximo acero en metálico: 25 mm máximo acero inoxidable: 20 mm máximo aluminio en 12 mm Longitud: 12800 mm Anchura: 6300 mm Altura: 2400 mm Peso de la máquina: 15000 kg Carga eléctrica conectada: 51 kVA

Peso de la bobina del desenbobinador: 2 x 2 toneladas Ancho del material: 380 - 500 mm Diámetro exterior de la bobina: 1,300 - 1,400 mm Rango de expansión: 445 - 530 mm Nivelador / Plancha Ancho del material: 40 - 500 mm Número de rodillos de nivelación: 7 piezas. Diámetro de los rodillos de nivelación: 60 mm Número de rodillos de presión: 2 piezas. Diámetro de los rodillos de dibujo: 60 mm Número de rodillos extrayables: 2 piezas. Diámetro de los rodillos extrayentes: 60 mm Grosor del material: 0,4 - 1,6 mm Sección transversal: 800 mm cuadrados Velocidad de alimentación: 0 - 30 m / min Potencia requerida: 3 kW

Peso de la bobina: 500 kg Ancho del material: 41 mm Diámetro exterior de la bobina: 1.000 mm Rango de expansión: 250 - 500 mm Velocidad: 20 m / min Potencia requerida: 0,5 kW Dimensiones L x Ancho x Alto: 1.000 x 850 x 1.700 mm Peso de la máquina aprox.: 200 kg

sheet width: 3100 mmplate thickness: 6.35 mmthickness at Niro-steel: 4.00 mmcutting angle: 0.5 - 2.5 °cutting gap adjustment: 0.05 - 0.8 mmno. of strokes: 12 - 50 Hub/minback stop - adjustable: 1000 mmControl: DELEM DAC 360 oil volume: 120 ltr.engine output: 9.5 kWweight: 7000 kg.range L-W-H: 3950 x 1950 x 1680 mm well-maintained condition () equipped with new DELEM control unitEquipment:- electro-hydraulic, guided plate shear- DELEM CNC control unit type DAC 360 front control panel, swiveling front left- Electro-hydraulic cutting angle adjustment- Electro-hydraulic cutting gap adjustment- electro-motorized backgauge, with ball screws- 1x extra-long side fence with T-slot mm scaleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 47400 €: 905.34 €: 2540 mm: 4.5 mm: Hydraulisch : 135 °: 3900 mm: 1700 mm: 1900 mm: 5100 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0147 : 890 €: 1 : 3050 mm: 105 mm: 85 mm (atornillado 5 veces desde arriba) Los datos de este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.

Grosor de placa: 3 mm, ajustable de - a: 30 - 120 Altura gradable: 900 mm Peso: aprox. 800 kg Capacidad de corte: 3 mm St40 a 150 x 150 mm, acero inoxidable de 2 mm, ángulo de corte ajustable continuamente de 30 a 120, sujeción neumática para ajuste de ángulo (sistema Boschert), la máquina está en buen estado. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Grosor de la placa: máximo 3 mm de distancia antes de la placa. rodillos: 125 mm, garganta: máximo 500 mmPeso: aprox. 500 kgGrosor del material a 40 kg/mm² Resistencia a la tracción: máximo 3 mmAncho de trabajo: 500 mmProfundidad de trabajo: 450 mmAjuste manual del rodillo superiorDistancia del centro del rodillo: 125 mmVelocidad de trabajo continuamente variable: 3–15 m/minFalda de registro1 juego de rodillosOperación hacia adelante/atrás mediante pedal de ruedasLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

contact roller: 70 x 50 abrasive belt size: 2000 x 12/50 power capacity: 2,2 kWOverall size: ca. 400 x 1100 x 1250 mmdeburring machine / free belt frinding machineabrasive belt with widt from 12-50 mm with vertical working positionhead inclination up to 45° both wayseasy bending of the belt allows to follow the shapecutting speed 24m / secbig tabel surface with ball rollingwith self filtering dust extractor system, filtering bag in retardant polyester material for retaining finest dust. Impeller with open blades to prevent clogging. air consumption 700 m³/hcomes with a huge bunch of belts!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 10.0 mmthickness at Niro-steel: 6.0 - 8.0 mmdown holder: 13 Stückdistance between columns: 3070 mmcutting angle: 1.0 - 4.0 °no. of strokes: ~ 22 Hub/minControl: ELGO P8511 oil volume: 240 lvoltage: 400 Vtotal power requirement: 15.0 kWweight: 8000 kgrange L-W-H: 3550 x 2350 x 1900 mm good condition () from a maintenance workshopEquipment:- NC electro-hydraulic guillotine shears- heavy / stable welded construction (machine body)- NC ELGO digital control unit P8511- NC electro-motorized backgauge on ball screws- electro-hydraulic cutting angle adjustment Front analog cutting angle display- 1x stable side fence, with T-slot and mm scale- 3x stable support arms, with T-slot and mm scale- Ball castors in the work table incl. recessed grips- Front finger guard - can be folded up at the front- 1x freely movable foot switch- 2x front emergency stop button-  ...

: 400 kNstroke length max.: 285 mmworking feed: 9 mm/secreturn speed: 20 mm/sec: 660x1250 mmwork height max.: 930 mmtoolpiece height max.: 250 mmtotal power requirement: 4 kW: 200x26 mmbending capacity max. - round: 60x5,0 mmDomestic equipments:- semi-automatic NC control (99 programs with 16 steps each)- incl. bending bolt (without punch)- Incl. tool holder for dies- incl. foot pedalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm: 8,5 U/min: 120 mmroll diameter: 152 / 162 mmengine output: 1,1 kWconnected load: 400 Vweight: 395 kgOverall size: 900x600x1100 mmEquipment / Accessories:- Two driven rollers- Manual delivery of the upper roller- Working position horizontal and vertical- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriage- The standard roller set is included. He can turndifferent profiles are usedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bending speed: 2.1 m/minBending capacity - square: 30x30 mmbending capacity - flat iron: 80x15 mmBending capacity - flat iron on edge: 50x10 mmtube diameter: 1 oder 60x2 mmShaft diameter - upper: 35 mmShaft diameter - lower: 30 mmtotal power requirement: 0,75 kwrange L-W-H: 650 x 500 x 1300 mmweight: 170 kgStandard features:- hardened special steel shafts- a set of hardened rollers- Bottom rollers are driven- lateral straightening rollers- Foot pedal- horizontal and vertical workingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial number: 4412956673057 : 95 to. ca. engine output: 7,5 kWweight of the machine ca.: ca 5 tdimensions of the machine ca.: 2,2 × 1,0 × 2,3 m Technical specifications (from the label)Angle steel (L-profile):150 × 15 mm at 90°100 × 14 mm at 45°Flat steel:up to approx. 150 × 16 mmlarger cross-sections up to 340 × 16 mm (depending on function)Beam profiles:U-profiles (UPN): 220I-sections (IPN)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3060 mmplate thickness: 6,0 mmdistance between columns: 3060 mm: max. 730 mmcutting angle adjustment: ja °cutting gap adjustment: ja mmconnected load: 11,0 kWweight of the machine ca.: 5,1 tdimensions of the machine ca.: 4,0 x 260 x 2,55 mHydraulic guillotine shear with- ELGO control for backgauge- Cutting gap adjustment- Cutting length adjustment- Cutting line illumination- Side gauge- 2 support bracketsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ancho de la lámina: 2040 mm Grosor de la placa: 4,0 mm Distancia entre columnas: 2100 mm Diámetro del rodillo: 150 mm Consumo total de potencia: 7,0 kU Peso de la máquina aprox: 2,2 tDimensiones de la máquina aprox: 2,95 x 1,0 x 1,75 mm Máquina de flexión de chapa metálica con 3 rodillos - 2 rodillos accionados - Rodillo trasero eléctricamente ajustable - Curvatura cónica - Interruptor de pie - Dispositivo de parada de emergencia Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Grosor de la placa: 6 mm Longitud de la cuchilla: 200 mmangle ajustable de - a: Fest 90 Superficie graduable: 750 x 500 mm Presión: tPotencia total requerida: 3,0 kWweight de la máquina aprox.: 0,62 tdimensiones: 1,2 x 0,8 x 1,2 m Máquina combinada: bordes y muesca - interruptor de pie - Interruptor de parada de emergencia Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Ancho de la lámina: 3000 mm Grosor de la placa: 16 mm Pre-curvado: Potencia total requerida: kWweight de la máquina aprox. : Dimensiones de la máquina aprox: m Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

sheet width: 2550 mmplate thickness: 10.0 mm STpre-bending: 8.0 mm STdiameter of upper rolls: ~ 205 mmside roll diameter: ~ 195 mmControl: konv. oil volume: 80.0 Litervoltage: 380 Vtotal power requirement: 7.5 kWweight: 4500 kgrange L-W-H: 5000 x 1500 x 1300 mmFeatures:- Robust electro-hydraulic 3-roll bending machine- 3-roll concept offers a wide range of bending and rounding options- Pivoting control unit at the front Operation - Control of all rolls and machine axes Digital position display Manual operation via joysticks- Diameters of up to 1.1 times the top roll diameter are possible- Forged and hardened rolls with a hardness of 53-55 HRC- Low-maintenance, stable machine design- Sturdy welded steel construction- Electro-hydraulic folding bearing for easy pipe removal- Pressure gauge / pressure indicator for the rolls- Safety device (safety lanyard with switch unit)- Operating instruc ...

weight max.: 1200 kgtable turning speeds: 80 - 1600 mm/min.roll diameter: 200 x 50 mmworkpiece diameter: 20 - 800 mmrange L-W-H: 520 x 470 x 390 mm Antriebrange L-W-H: dito mm Mitläufervoltage: 230 V / 50 Hzweight: 56.0 kg current new price approx. 3,000 euros special price on requestProduct description:- For processing cylindrical workpieces- Flat frame- Swivel castors with polyurethane coating- Clearly arranged operating elements- Infinitely variable speed- The control electronics are protected by a robust and. enclosed housing- With foot switch for start/stop- Drive with DC electric motors and gearboxThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2020 mmplate thickness: 1,5 mm: 135 °: 100 mmtotal power requirement: 1 kWweight of the machine ca.: 965 kgdimensions of the machine ca.: 2680 x 640 x 1100 mmNEW PRICE: 9,990 EURODescription:- Foot operation enables positioning of the sheet metal with both hands- Workpiece clamping and bending process are motorized via a chain drive- Manual adjustment of the bending angle, reading of the angle on a scale ring- Many bending options with segmented upper beam- Precise movement of the bending beam via large flat guides- Heavy, robust welded constructionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: R10-R260 bending speed: 2,5 U/min: 54,0 x 2 mmSheet thickness aluminum: 54,0 x 2 mm: 42,4 x 3 mmsheet thickness for stainless steel: 42,4 x 2 mm: 30 mm: einphasig - 230 Vdrive motor: 1,5 kWweight of the machine ca.: 80 kgdimensions of the machine ca.: 363 x 900 x 595 mm‘ERCOLINA MEDI BENDER’Single-phase mandrel-less bending machine up to 42 mmFeatures:- Control system: Soft-touch control panel in 8 different languages- Number of programs: 30, each with 9 bends- Standard accessories (including foot switch, user manual)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching capacity: 220 kNlaser capacity in Watt: 4000 travel -x axis: 3050 mmtravel -y axis: 1550 mmCutting capacity structural steel: 8 mmCutting capacity stainless steel: 8 mmCutting capacity aluminum: 6 mmworkpiece weight: 280 kgweight of the machine ca.: 24.000 kgdimensions: 10130 x 8898 x 2328 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mmplate thickness: 2.5 mm: 45.0 mmbending angle max.: 0 - 135 °weight of the machine ca.: 285 kgrange L-W-H: 1175 x 850 x 1175 mmDescription:Swivel bending machine with patented hydraulic auxiliary cylinder andRemote control. The machine is both manual (for thinner sheets) andmotorized (for thick sheets) operated. The motorized function is overa remote control operated with an emergency stop.Version S - with segmented upper beam for boxes and special profiles- Max. Bending angle 135 °- Max. Opening upper beam 45 mm- The HS Ergo is a further developed machine that uses a patient hydraulic auxiliary cylinder is supported- The machine is both manual (for thinner sheets) and motorized (for thick sheets) operated.- the motorized function is operated via a remote control with emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech ...

Grosor de la placa: 4,0 mm. Diámetro del rollo: aprox. 120 mm. Garganta: 450 mm. Consumo total de potencia: kWweight de la máquina, aprox. 0,48 tDimensiones de la máquina, aprox. 1,3 x 0,8 x 1,8 mm. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.