trabajo con chapas de metal usadas para la venta (3,272)

sheet width: 2050 mmplate thickness: 4,5 mmpre-bending: 4,0 mmmin. dia.: 210 mmroll diameter: 140 mmweight of the machine ca.: 1530 kgdimensions of the machine ca.: 3220x1200x900 mmStandard features:- Central rollers via electric motor, planetary reduction gear andGear drive driven- Swivel top roller- Main engine with brake device- Conical bending device- Mobile controller and foot pedal- CE mark / Declaration of ConformityAdditional equipment:- motorized rear roller adjustment- Digital display for back roller- induction hardened rollsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ancho del material: 0400 mmbobina Peso: 1,50 Grosor del material: MMNOMB. De rodillos de rectificado: 9 diámetros de los rodillos aprox. 30 mm. Rango de expansión aprox. 460 - 530 mmcoil exterior - diámetro aprox. 1500 mm. Potencia total: kWpeso de la máquina ca.: tdimensiones de la máquina ca.: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

: : Consumo total de energía: kWweight de la máquina ca.: tdimensiones de la máquina ca.: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

working width: 1500 mmworkpiece width - max.: 0,5 - 50 mmdimensions: 3300 x 1500 x 1800 mmfeed stepless: 0-4 m/mintotal power requirement: 20,4 kWweight of the machine ca.: 2800 kgThe SBM-L G1S2 grinding and deburring machines were developed for double-sided deburring and edge rounding of workpieces in a single operation. LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser parts, and stamped parts.The L series is equipped with three units on the top and bottom . Workpieces made of stainless steel, steel, aluminum or non-ferrous metal can be processed on the top, bottom or both sides. Processing sheet metal on both sides and rounding edges in a single operation saves up to 60% in time. It is also possible to easily connect automation solutions or integrate the machine into production lines. The machine design ensures ergonomic working and a pleasant ...

working width: 1000 mmworkpiece width - max.: 0,5 - 50 mmsandingbelt width: -- mmweight of the machine ca.: 2,5 tWith the SBM-L 1000 G1S2, which works in the dry process, in alternating operationSteel, stainless steel and aluminum can be machined. She deburrs and roundsthe edges on the outer and inner contours of punched, laser, fine plasma orwater jet cut workpieces with a thickness of up to 50 mmon both sides in just one operation. Two sanding units, 1 each on the top and bottom, remove spatterand slight burrs on outside and inside edges of sheet metal. A total of four sanding belts, 2 each on the top and bottomUnderside, process the sheets on both sides at the same time. hereAll edges are softened or rounded, depending on the tool settings. Machining on both sides saves time-consuming turning of the workpieces andedit twice. All pairs of aggregates can be switched on/off separately de ...

Capacidad de prensado aprox.: 360 kN Longitud de flexión aproximada: 1020 mm Distancia entre bastidores laterales: 932 mm Altura efectiva al aire: 295 mm Profundidad de garganta: 150 mm Velocidad de trabajo: 25 mm/seg Velocidad de alimentación: 220 mm/seg Control: TASC 6000 Horario de trabajo: 41422 h Tiempo de trabajo viga de gato: 4713 h Longitud: 1805 mm Ancho: 1330 mm Altura: 2380 mm Peso de la máquina aprox.: 2600 mm

sheet width: 3050 mmplate thickness: 6 mmdistance between columns: 3460 mmtable height: 800 mm0: 220 barcutting angle adjustment: 0,5x3 °down holder: 18 back stop - adjustable: 750 mmfront stop - adjustable: 1000 mmmain drive: 7,5 kWoil volume: 300 ltotal power requirement: 7,5 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3,7x2,0x1,8 mcutting angle adjustment manuallyblade gap adjustment manuallyangle stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ancho de la lámina: 2500 mm Grosor de la placa: 3 mm Distancia entre columnas: 2540 mm, tope - ajustable: 550 mm, consumo total de potencia: 5 kWweight de la máquina aprox: 2,7 tDimensiones de la máquina aprox: 3,2 x 2,5x 1,9 m Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

plate thickness: 4 mmblade length: 220 mmpressure: 0 tweight of the machine ca.: 1,5 tdimensions of the machine ca.: 1,6 x 1,7 x 1,6 mtotal power requirement: 2,5 kWCombined notching machine with a fixed 90° angle and an adjustablerectangular notching unit variable up to 200mm length x fixed 100mm width.There are 2 manually adjustable stops with a digital display.Axle length X900mm / Y300mmThere is no stamp holder / punch / hold-down device for this.These parts can be purchased from Boschert.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Espesor de la placa: 3-4 mm. Presión: 0 tLongitud de corte: 220 mm, altura de la mesa: 900 mm. Cantidad de aceite: 35 l. Dimensiones de la tabla: 950 x 790 mm, consumo total de potencia: 4 kWpeso de la máquina, aprox. 0,95 t: dimensiones de la máquina: 1,0 x 0,86 x 1,2 m. Ajuste automático del ángulo del interruptor 30-140 ajuste automático de corte. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

: 220 kNsheet thickness - max.: 8 mmtravel -x axis: 2500 mmtravel -y axis: 1250 mm: 90 m/min: 60 m/min: 108 m/min: 360 °/secpunch diameter: 76,2 mmworkpiece weight: 150 kg: 0,01 mm bzw. 0,01° : 15 Stücktool changing time: 1,5 - 6,5 secweight of the machine ca.: 11.050 kgdimensions: 6400 x 5800 x 2100 mmWorking hours: 30.430 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ancho de la lámina: 2500 mm Longitud de la placa: 1250 mm Grosor de la placa: 8 mm Capacidad de perforación: 220 kNumber de horas de trabajo: 51,658 h Consumo total de potencia: kW peso de la máquina aprox: 11,050 kg Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Grosor de la placa: 6 mm. Presión: 18 t. Longitud de la pala: 220 mmangle ajustable de - a: 90 Superficie gradable: 1100 x 950 mm, longitud de chaflón: 835 mm, consumo total de potencia: kWpeso de la máquina, aprox. 1,1 tdimensiones: 1,2 x 0,8 x 1,4 m. Máquina combinada: bordes y muescas, interruptor de pie- Interruptor de parada de emergencia. Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

open-circuit voltage: 280 - 320 VDCcurrent intensivity: 30 - 80 Aoutput voltage: 140 VDCcutting medium: Air / Nitrogen total power requirement: ca. 11,2 kWweight of the machine ca.: 40 kgdimensions of the machine ca.: 0,90 x 0,35 x 0,50 mPlasma Cutting MachineHYPERTHERM - Hypertherm Powermax 1100incl.HYPERTHERM RT 80 hand torch- Recommended cutting capacity: 22 mm- Maximum cutting capacity: 29 mm- Severing capacity: 38 mm- Gas: Air or nitrogen- Gas inlet pressure: 6.1 bar- Gas flow rate: 189 l/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Desbobinador Desbobinador con brazo: 1,5 toneladas Ancho del material: 350 mm Diámetro exterior de la bobina: 1,200 mm Rango de expansión: 370 - 430 mm Velocidad: 0 - 20 m / min Nivelador / Planchador Ancho del material: 250 mm Número de rodillos de nivelación: 9 piezas. Diámetro de los rodillos de nivelación: 30 mm Grosor del material: 0,5 - 6 mm Sección transversal: 1,200 mm Velocidad de alimentación: 20 m / min Potencia requerida: 18 kW

sheet width: 3200 mmplate thickness: 3.0 mm STthickness at Niro-steel: 2.0 mmOpening width / upper beam: 300 mmspeed: OW 40.0 mm/secBending beam adjustment: 80.0 mmspeed: BW 90.0 Grad/secwork height max.: 900 mmcontrol: MULTIBEND 5000 back stop - adjustable: 10 - 1550 mmaccuracy +/-: 0.1 mmair pressure: 5.0 barNumber of working hours: ca. 1.000 htotal power requirement: 2x 4.0 kWvoltage: 400 Vweight: 4400 kgrange L-W-H: 4295 x 2225 x 1775 mm New price approx. 85.000 euros Machine with only approx. 1.000 operating hours () good condition () Special price on request- in checked condition - machine video -https://www.youtube.com/watch?v=VP6emx4HTYM! Maximum flexibility when bending cassettes, boxes and profiles! High flexibility in bending part design! High productivity and throughput! Easy to useEquipment:- motorized universal swivel bending machine RAS 73.30 high-precision mechanics with  ...

sheet width: 1350 mm: 3 mmsheet thickness for stainless steel: 1,5 mmrear stop: 600 mmtotal power requirement: 3 kWweight of the machine ca.: 1150 kgdimensions: 2030 x 1940 x 1220 mmStandard equipment:- All-steel welded construction with static and dynamic frame rigidityframe rigidity- Direct drive with brake motor- Specially alloyed cutting blades- 750 mm motorized, digitally adjusted backgauge with ball screwsrecirculating ball screws- Manual blade gap adjustment system- Mechanical sheet clamping system with plastic base- Work table with insert plates- foot switch for single and repeat cutting cycles- 1 x squaring arm 1000 mm long with metric scale- 2 x 800 mm front material support arms- Front stop- Finger protection - front and rear covers- Rear light guards- CE declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 1020 mmplate thickness: 1,5 mmcutting length: 1020 mmweight: ca. 300 kgdimensions of the machine ca.: 1,3 x 0,8 mCondition: good, demo machine: Side stop: 600 mmMaterial place of deposit: ausziehbar Hand lever shears with counterweight, length stop, blank holder withQuick clamping, mm scale on the table, pull-out sheet metal support.Demonstration machine at a special price.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

engraving field: 120 x 120 mmtable-size: 250 x 250 mmworkpiece weight: max 50 kgControl: Fobagraf machine weight ab.: 1000 kgmachine frame made of welded steel constructionCross slide, hard stone design, table top with steel stop ironHeight-adjustable laser headQuality-switched ND: YAG laser head, lamp-pumped, 100 WDeflection unit mounted on the laser head (with standard lens)Z-axis with gearbox and servo driveServo axis control with X-, Y-, and Z-axesWater-cooledControl: Fobagraf user software packageOperating system: Windows 2000operating hours: 17.388 hmanual includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mmplate thickness: 2 mmthickness at Niro-steel: 1,25 mmno. of strokes: 63 Hub/mincutting angle: 1,13 °table height: 750 mmtable width: 320 mmback stop - adjustable: 5,0-550 mmtotal power requirement: 3 kWweight of the machine ca.: 1300 kgEquipment:- manual backgauge, with analog display Adjustable from the front stepless adjustment over the entire travel range- 1x long side stop- 3x support arms- Free-moving foot switch- Sheet holding device for thin sheet blanksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mmplate thickness: 2 mmthickness at Niro-steel: 1,25 mmno. of strokes: 63 Hub/mincutting angle: 1,13 °table height: 750 mmtable width: 320 mmback stop - adjustable: 5,0-550 mmtotal power requirement: 3 kWweight of the machine ca.: 1600 kgEquipment:- manual backgauge, with analog display Adjustable from the front stepless adjustment over the entire travel range- 1x long side stop- 3x support arms- Free-moving foot switch- Sheet holding device for thin sheet blanksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3020 mmplate thickness: 5 mmdistance between columns: 3020 mmControl: Simatec OP7 stroke: 450 mmback stop - adjustable: 1000 mmwork height max.: 900 mmtotal power requirement: 22 kWweight of the machine ca.: 9000 kgdimensions of the machine ca.: 4200 x 1600/2900 x 2000 mmFeatures:- Motorized backstop, 1000 mm- Motorized upper crossbar adjustment- Motorized lower crossbar adjustment- Side protection- Foot switch- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ancho de la lámina: 3000 mm, grosor de la placa: 4 mm, altura máxima: 900 mm: 450 mm, consumo total de potencia: 5,5 kWpeso: aprox. 4800 kg. Dimensiones de la máquina: 4250 x 1500 x 1850 mm. Equipamiento: - ajuste eléctrico del ángulo de flexión- ajuste eléctrico de la viga superior- interruptor de pie- instrucciones de uso. Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Ancho de la lámina: 3240 mmGrosor de la placa: 2,00 mmDistancia entre columnas: mmRequisitos totales de potencia: kWweight de la máquina: aprox. 3,00 tDimensiones de la máquina aprox.: mOperación de flexión manual y automática posibleÁngulo de flexión ajustable mediante potenciómetroAltura de la carrera superior y grosor del material seleccionables mediante interruptores DIP. Doblado el carril y la máquina en excelente estado. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

sheet width: 3050 mmplate thickness: 6 mmrear stop: 10-1000 mmcutting angle: 0,5 - 2,5 °down holder: 20 Stkno. of strokes: 14 - 23 Hub/minwork height max.: 900 mmoil volume: 140 ltotal power requirement: 11 kWdimensions of the machine ca.: 4000 x 2150 x 1900 mmweight: 7800 kgEquipment:- ELGO control unit type P50- Automatic cutting angle adjustment- Automatic cutting gap adjustment- electric back gauge- Pneumatic sheet holding device- Light barrier behind the machine- 4 support arms- front finger guard- foot switch- Angle stop 0 - 180- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 34 mmsquare edge steel: 30 x 30 mmL-beam: 100 x 10 mmflat steel: 100 x 14...160 x 11 mmblade length: 175 mmT-beam: 100 x 10 mmnotching: l + T material: 10 mmhole punhing press: pressure: 45 tthroat: 305 mmtotal power requirement: 3 kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 1,4 x 0,8 x 1,5 m 5-fold combinated profile steel shear incl. flat steel shear profile steel shear bar steel shear notcher hole punch 2 foot switches contact limit stop various punching saddles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 135 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secwork speed: 10.0 mm/secreturn speed: 135 mm/secwork stroke: 275 mmdayligth: 550 mmtable height: 900 mmtable width: 90.0 mmcontrol: ModEva 12S oil volume: 200 ltr.voltage: 400 Volttotal power requirement: 11.0 kWweight: 8800 kgrange L-W-H: 4250 x 2150 x 2800 mm current new price approx. 80.000 euros special price on request- in checked conditions - machinevideo - https://www.youtube.com/watch?v=ALo1SpWfnTk--------------------------- ------------------------------SPEED BEND electro-hydraulic press brake with : increased installation height increased cylinder stroke increased throat depth---------------------------------------------------------Equipmen t:- CNC electro-hydraulic press brake- CYBELEC ModEva 12S CNC control unit High-resolution screen Clear, concise menus in the ...

plate thickness: 6.5 mmthickness at Niro-steel: 5.0 mmangle adjustable from - to: 30 - 140 Gradno. of strokes: ca. 50 Hub/mintable:: 950 x 1030 mmblade length: 220 x 220 mmtotal power requirement: 4.0 kWweight: 800 kgrange L-W-H: 1100 x 950 x 1280 mm current new price approx. 20.000 euros good condition () special price on requestEquipment:- electro-hydraulic notching machine- multi-function machine with 2x work stations 1x notching, 1x unit for radius rounding including radius punching tools- manual angle adjustment 30 - 140 degrees 2x handwheels for angle adjustment- large / stable work table- 2x new angle stop, adjustable- automatic cutting gap adjustment- 1x freely movable foot switch- connection cable + 16A plug- cutting performance: 6.5 mm to 60° ST 5.0 mm to 60° VA 4.0 mm to 30° ST 3.0 mm to 30° VAThe data for this ad was created with ModulMWS - the software solution of LogoTe ...

Ancho de la lámina: 2040 mm Grosor de la placa: 3,00 mm Distancia entre columnas: mm Requisito total de potencia: kWweight de la máquina aprox. 2,30 tDimensiones de la máquina aprox. mOperación de flexión manual y automática posibleÁngulo de flexión ajustable mediante potenciómetroAltura de la carrera superior de la mordaza y grosor del material seleccionables mediante interruptores DIPPogás manual con dedos de resorteLos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

round bar steel: 45 mmsquare edge steel: 45 mmL-beam: 12 mm: 40 flat steel: 450x15 mmL-beam 90°: 152x152x13 mm: 45 mmsquare edge steel: 45 mm: 12 mmweight of the machine ca.: 2323 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.