trabajo con chapas de metal usadas para la venta (3,338)

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12150 €: 233.28 €: 0.4 - 2 mm: 100 mm: 200 mm²: 63 mm: 150 m/min: 10 m/s²FESTO pneumatic systemSIEMENS servo drive and control system7’ colour touch screen SIEMENS2 feed rollersOption:Handwheel and Simlinx remote maintenance module € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2021 : 9502 : Türkei : 2200 €: 1 : 1050 mm: 2 mm: 75 mm: 1930 mm: 700 mm: 1160 mm: 300 kgMINT CONDITION3 rollsasymmetric rolls - prebendinglongitudinal grooves in lower and lateral rollInfeed of the lower roller by a central lever - with gear reductionmachine standuser manual in GERMAN orENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5200 €: 100.36 €: 1270 mm: 1.5 mm: 75 mm: 1.5 kW: 1830 mm: 700 mm: 1160 mm: 400 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorlateral roll adjustable by ratchet leverlongitudinal grooves in lower and lateral rolltiltable upper rollright / left rotation with double foot switchuser manual in GERMAN or ENGLISHOPTION (PRICE ON REQUEST):hardened rollsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 29200 €: 557.72 €: 3200 mm: 2 mm: 1.2 mm: 3650 mm: 1700 mm: 1300 mm: 3100 kgNC-controlled backgauge 750 mmELGO P40T touchscreenRear light barrier protectionFront finger guard coverExtendable front support bracketCutting line illuminationEquipment compliant with CE directivesOperating instructions in German or EnglishOPTIONS: Sheet support, front or rear unloading € 1.900,00 Sheet support, front andrear unloading(NC controlled) € 2.840,00 (gauging length decreases approx. 200 mm) 1000 mm servo-backgauge € 900,00 Side gauge extension to 2 m € 410,00 Sheet metal carriage with rollers (capacity 1,000 kg) € 1.040,00 Angle stop € 460,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ancho de placa: / mmGrosor de placa: / mm: Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Ancho de hoja: 300 mmcoil diámetro interno: 360 -440 mmLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Ancho de lámina: 1270 mm Grosor de la placa: 4,00 mm Distancia entre columnas: mm Requisito total de potencia: kWweight de la máquina aprox. 2,00 tDimensiones de la máquina aprox. mRetrogálido manual con cigüeñal manual Ajuste de espacio de corte mediante volante Extensión lateral y de mesa Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Ancho de la lámina: 1025 mm Grosor de la placa: 1,50 mm Pre-curvado: diámetro de los rollos aprox. 65 mm Potencia requerida total: kW de la máquina aprox. Dimensiones de la máquina aprox: mRotación en sentido horario y antihorario mediante interruptor de pie de seguridad Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Auction-ID: A1-48199-10

cutting range for steel to: 0,5 - 120 mmcapacity at 100%: 440 A mmcutting medium: PerCut 451 dimensions: ca. 1030 x 680 x 1450 mmweight: ca. 600 kgContour Cut Exact contours and holes in mild steel with a diameter to material thickness ratio of 1:1 (Diameter:material thickness Contour Cut Speed Contour cutting in mild steel with similar quality and up to 50 % higher speed Silent Cut Cutting of mild steel with reduced sound pressure level HiFinox Plasma cutting of stainless steel and aluminium from 1 to 6 mm with significantly less dross Ar/H2 Mix Excellent cutting results thanks to active mixing of single gases for stainless steel and aluminium starting from 6 mm Marking, notching, punching Individual labeling of the materialThe HiFocus 440i neo is one of the most flexible and most powerful high-precision plasma cutting units worldwide. Its wide cutting range from 0.5 mm to 120 mm means  ...

sheet width: 3000 mmplate thickness: 4,0 mmdistance between columns: 3080 mm: max. 1000 mmCutting length: variabel mmcutting gap adjustment: variabel mmconnected load: 11,0 kWweight of the machine ca.: 5,8 tdimensions of the machine ca.: 3,7 x 1,9 x 3,94 mHydraulic guillotine shear with- Control system: Siemens OP7- Cutting gap adjustment- Cutting length adjustment- Shadow line lighting- Support arms- Sheet support system- Sheet conveyor belt- Scrap diverterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 t. peso: 1,8 hidráulico: JA barra redonda Acero: 40 mm Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

pressure: 35.0 tplate thickness: max. 8.0 mmthroat: 830 mmdiameter of seal: max. 105 mmtable:: 1500 x 1200 mmwork height max.: 920 mmPressure power: 220 baroil volume: 80.0 ltotal power requirement: 4.0 kWweight of the machine ca.: 3200 kgrange L-W-H: 1600 x 1800 x 1800 mmThe IS 35 hydraulic punching machine has been specially optimized for processing sheet metal and extruded parts. It stands out for its flexibility and manufacturing precision. The machines in the IS series are equipped with 35 metric tons of punching force.Features:- Electro-hydraulic punch press with long reach - Robust C-frame construction Solid cast or welded frame (C-shape) Extremely high punching precision Compact design = small footprint Hydraulic overload protection - Separate control unit - Single and continuous stroke selectable - Infinitely adjustable controller for: âtop dead centerâ?- Continuously adju ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 45700 €: 872.87 €: 2035 mm: 6.5 mm: Hydraulisch : 135 °: 3300 mm: 1550 mm: 1900 mm: 3710 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Longitud de trabajo: 2.000 mm Capacidad (hierro): 2,0 mm Capacidad (aluminio): 2,5–3,0 mm Auction-ID: A7-40835-7

Auction-ID: A7-40835-3

: neu : ca. 10 Wochen ab Auftrags : Türkei : 53700 €: 1014.93 €: 2050 mm: 16 mm: 16 mm: 13 mm: 13 mm: 10 mm: 260 mm: 260 mm: 200 mm: 1,5 / 6 m/min: 7.5 kW: 4300 mm: 1600 mm: 1550 mm: 6100 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are r ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 5104 €: 98.51 €: 3/4 26,9 mm, 1 33,7 mm, mm: 5 mm: 3 mm: 87 kgThe motor driven AL 1-2E can be used to notch pipes with an external diameter of 26.9 mm (3/4",), 33.7 mm (1",), 42.4 mm (1 1/4",), 48.3 mm (1 1/2",) and 60.3 mm (2",).Do you often have to notch pipes? If so, the motor-driven AL1-2E equipped with a 2.2 kW electric motor is the ideal solution!The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0089 : 142 €: 1 : 835 mm: 1 mm Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Capacidad de corte: 2,5 mm mm Garganta: 750 mm de ronda Diámetro máximo: aprox. 1500 mm Peso de la máquina aprox. 800 kg Incluye un conjunto de nuevas herramientas de reemplazo Los datos de este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.

Ancho de hoja: 1020 mm, grosor de la placa: 2 mm. Los datos de este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.

Ancho de la lámina: 1050 mm, grosor de la placa: 2,5 BEI 400N/mm² mmrollo diámetro: 90 mmPeso: aprox. 490 kgMáquina motorizada de flexión circular de tres rodillos en configuración asimétrica. El rodillo superior gira hacia adelante Ajuste del rodillo mediante volante manual, adecuado para flexión cónica Cordón de parada de emergenciaLa máquina proviene de un taller de formación y está en muy buen estadoLos datos de este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.

Ancho de chapa - máximo: 0650 mmbobina Peso: 2,00 tbobina diámetro interno: 240-270 mmbobina exterior - diámetro aprox. 1500 mm Expansión: Mecanisch Freno: über Velocidad del motor: 5 m/min Potencia total requerida: 0,55 kWweight de la máquina aprox. 0,590 tDimensiones de la máquina aprox. 1,40 x 0,80 x 1,10 mM. 650 mm sin brazos de alimentación por arosSistema de control faltanteConectado temporalmenteLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Ancho de hoja: 0200 mmbobina Peso: 0.075 Tbobina Diámetro interno: 183 mmbobina exterior - diámetro aprox. 650 mm0: 16 U/min Potencia total: 0,25 kWpeso de la máquina aprox. 0,12 tDimensiones de la máquina aprox: 0,80 x 0,70 x 1,20 mControl faltanteMotor conectado temporalmenteFreno mecánicoLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : 1280 mm: 12 mm: 9 mm: 9 1/min: 3 °: 7 : 500 mm: 15 kW: 180 l: 950 mm: 1950 mm: 1200 mm: 1800 mm: 3200 kghydr. drive unit, completely integrated in the machine bodyoverload safety, hydraulic and electricaladjusting of the cutting angleadjusting of the cutting gapblank holder pressure, adjustablesupport arm with angle stop and scale up to 600 mm4 rotating knives for VA steelmovable pedal switch with solenoid valvesMotorised backgaugeCentral lubricationexchangeable machine table supportsection area lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mmplate thickness: 3.0 mmdistance between columns: 2100 mmback stop - adjustable: 550 mmno. of strokes: 35 Hub/mincutting angle: 2°12 table width: 400 mmtable height: 850 mmControl: konv. total power requirement: 3.0 kWweight of the machine ca.: 1280 kgdimensions of the machine ca.: 2400 x 1500 x 1300 mm Current list price: approx. 20.000 euros From a maintenance workshop Features:- Robust / high-performance electromechanical guillotine shear- Manual material backgauge Continuously adjustable range Adjustment from the back via handwheel Includes mm scale Max. adjustment range: 550 mm - Manual cutting gap adjustment, from the front- 1x side stop with mm scale- 2x support arms- 1x freely movable foot switch- rear sheet metal chute- rear safety device (light barrier)- operating instructions (machine control system)- Transport stand (homemade)The data for this ad was  ...

chamfer lenght: 1530 mmplate thickness: mmdistance between columns: 1530 mmpressure: 40 tstroke length max.: 300 mmtravel -x axis: 500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamfer lenght: 3020 mmplate thickness: mmdistance between columns: 2555 mmpressure: 220 tstroke length max.: 350 mmtravel -x axis: 750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: . mmy-travel: . mmz-travel: . mmcontrol: SIemens type: Shopmill 840 D table surface area: mmworkpiece weight: kgTool changer: 30 Fachspindle taper ISO: Spindle capacity: KWturning speeds: U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: . mWorkpiece width: Max. 550 mmWorkpiece length: Max. 1300 mmWorkpiece height: Max. 600 mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We l ...

x-travel: . mmy-travel: . mmz-travel: . mmcontrol: SIemens type: 840 D ECOLINE Shopmill table surface area: mmworkpiece weight: kgTool changer: 30 Fachspindle taper ISO: Spindle capacity: KWturning speeds: U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: . mWorkpiece width: Max. 550 mmWorkpiece length: Max. 1300 mmWorkpiece height: Max. 600 mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointme ...