tornos usadas para la venta (2,986)

turning diameter: 376 mmturning length: 1245 mmcontrol: FANUC i-Series turning diameter over bed: 376 mmx-travel: 230 mmz - travel: 1350 mmrapid travel x/y/z: 24/30 m/minmain spindle speeds:: 2800 spindle motor: 35 / 26 kWmax. torque on the spindle: 1613 Nmspindle passage: 102 mmtotal power requirement: 33,91 Kvaweight of the machine ca.: 7 tdimensions of the machine ca.: 4,6 x 2,11 x 2,3 mEquipped with:- Fanuc i-Series CNC control- C-axis- 3-jaw chuck, 304 mm diameter- 12-station tool turret- Tailstock- Chip conveyor- CEOnly 2,300 spindle hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diámetro de torneado: 1800 mm Longitud de giro: 600 mm control: Siemens 6 - Mandíbula Chuck: ? Diámetro del husillo: 130 mm nariz del husillo: DIN 55027 Größe 11 rango de velocidades de giro: 1 - 400 U/minmax. Par motor en el husillo: 9000 Potencia total requerida: 38 / 52 kWweight de la máquina aprox: 25 tDimensiones de la máquina aprox. 6x3x2,5 m Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

diámetro de torneado: 340 mm longitud de tornado: 1,135 mm. control: Sinumerik 840D Programa sobre: aprox. 22.000 diámetro de giro sobre la cama: 700 mm distancia al husillo: 1,470 mm, potencia total requerida: kWweight de la máquina, aprox. 14,5 tdimensiones de la máquina, aprox. 5,614 x 2,417 x 2,419 m. Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning length: 2000 mmgreates pass round over bed: 630 mmswing diameter over slide rest: 350 mmcontrol: Monforts Control System K bed width: 550 mmturning speed range: 2 - 1800 U/minspindle diameter in front bearing: 120 mmspindle head DIN 55027 - Size: 8 tool taper: RD2 PARATquill stroke: 210 mmspindle bore: 71 mmtotal power requirement: 30 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 4,90 x 2,10 x 2,00 mThree-jaw chuck / key bar / Ø250mmFour-jaw chuck3-jaw chuck for tailstock4-station tool post head PARATFixed steady rest, Ø smallFixed steady rest, Ø largeVarious chuck jaws, live centers, live centers, tool holdersChip conveyor with coolant pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Paso del husillo: 80 mm máx. diámetro de giro: máximo 395 mm. Longitud de giro: 750 mm. Control: System TX 8H máximo. Velocidad del husillo: 3,150 U/min. Torno CNC | TRAUB - TNA 400La máquina está en buen estado.- - - - - - #Tags:TNA400 | TNA-400Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

max. working diameter: 610 mmmax. working lenght: 1.522 mmtravel -x axis: 740 mmtravel -y axis: 410 mmtravel -z axis: 1.838 mmcontrol: MAZATROL Fusion 640M Pro b-axis: 240 °c-axis: 360 °number of spindle speeds: 4.000 U/minspindle bore: 88 mmmilling spindle turning speed range: 12.000 U/minnumbers of positions in the tool changer: 80 CNC Turning- and Milling Center | MAZAK - INTEGREX E-410HThe machine is in a well-maintained condition.The machine video from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: INTEGREXE41H | INTEGREX 410H | INTEGREX-E410 HThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 80 mmmax. turning diameter: 460 mmMax. Turning length: 1.000 mmcontrol: System TX 8F max. Spindle speed: 2.800 U/min.CNC lathe | TRAUB - TNA 500The machine is in a well-maintained condition.The machine videos from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags:TNA500 | TNA-500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: Fanuc 31/32 i : 2 chucking diameter: 170 mmswing diameter: 210 mmx-travel: 400 mmz-travel: 200 mmlength: 2500 mmwidth: 1900 mmheight: 2300 mmweight: 5500 kgturning height: mmturning diameter: mmswing diameter: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1450 mmturning diameter over slide rest: 950 mmturning length: 4000 mmcentre height: 725 mmfaceplate diameter: 1000 mmtravel -x axis: 980 mmtravel -z axis: 4000 mmworkpiece weight: 2 toturning speed range: 1,5 - 1000 U/minspindle hollow: 500 mmControl: Siemens 828D total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m- CNC Control Siemens 828D- Front and Rear 1000mm dia. 4 – chucks- Tailstock- Chip Conveyor- Boring Bar 1500 mm x 120 mm- Boring Bar 1690 mm x 120 mm- Boring Bar 1000 mm x 80 mm- Boring Bar 1500 mm x 100 mm - Quantity of KM ToolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bed width: 350 mmturning length: 1.000 mmcontrol: Manual plus 620 Heidenhaingreates pass round over bed: 430 mmSwing dia. over traverse guideway: 220 mmMain spindle:: turning speed range - main spindle: 1 - 3.600 min/-1power capacity - main spindel: 9 / 11 kWmax. Torque: ca. 200 Nmspindle head: DIN 55027 / 6 spindle diameter in front bearing: 110 mmspindle bore: 80 mmusable bar diameter: max. 80 mmTool Mount:: System: MultiFix Shank diameter: 20 x 20 mmaxis stroke:: x-axis: 230 mmz-axis: ca. 1.000 mmTailstock:: diameter of quill: 70 mmquill stroke: 150 mmtaper of center: MK 5 steady: hollow: fix: 12 -150 mmhollow: var: 12 -125 mmfeeds:: rapid traverse: X: 10 / Z: 7 m/minfeed power: X: 4 / Z: 5 kNtotal power requirement: - kWweight of the machine ca.: 3,2 tdimensions of the machine ca.: 2,8 x 2,1 x 1,9 mDocuments: Tailstock: steady rest: 1x Coolantsystem: Multifix holder: 2x Lat ...

turning diameter: 313 mmturning length: 501 mmcontrol: Fanuc Oi-TD total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mFanuc Oi-TD cnc controlmain spindle: collet chuck devicesub spindle: collet chuck device12-fold revolver (BMT 55)C-axisY-axisdriven toolscoolant deviceTechnische Daten: / technical detailsSchwingdurchmesser / rotary diameter 707 mmDrehdurchmesser / turning diameter 313 mmDrehlänge / turning length 501 mmX-Weg / X-travel 196 mmZ-Weg / Z-travel 715 mmY-Weg / Y-travel -25,4 / +65 mmmax. Drehzahl Hauptspindel / max. spindle speed main spindle 5000 UpM /rpmmax. Drehzahl Gegenspindel / max. spindle speed sub spindle 5000 UpM /rpmAnzahl der Revolverplätze / number of tool places 12 max. Stangendurchmesser / max. bar diameter 51 mmAntriebsleistung Hauptspindel (30min)/ drive capac ...

: 0460 mm: 1500 mm: : 230 mm: 78 mm: 400 mm: 2200 U/min : D1-8 DIN 55029 : 95 mm: 145 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0330 mm: 210 mm: 0635 mm: 167 mm: 40 mm: 2,2 kWspindle turning speed - stepless: 30-3000 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 356 mmturning length: 510 mmcontrol: M 730 BM total power requirement: 40 kVAweight of the machine ca.: 6,6 tdimensions of the machine ca.: mCNC control:Mitsubishi 730 BMMain spindle:Speed: 5000 rpmPower: 15/11 kW (15% duty cycle / constant)Bar diameter: 65 mmSub spindle:Speed: 6000 rpmPower: 11/7.5 kW (25% duty cycle / constant)Turret:12 stationsTool spindle speed: 10000 rpmPower: 5.5/3.7 kW (5 minutes / constant)Y-axis travel: +/- 50 mmEquipment:Machine with gantry loader:Left-hand installation, 14-station storage, 20-pallet workpiece storage,Double gripper conveyor3-jaw hydraulic KITAGAWA power chuck, 210 mm diameterHigh/low pressure chuck system for main and counter spindlesMABEO high-pressure pump with 1.5 MPa filter unitCoolant gunCoolant sprayer on the chuck for main and counter spindlesCoolant sprayer for the machine bed claddingOil mist separatorHinged belt c ...

Diámetro de giro sobre la cama: 430 mm Diámetro de giro sobre el soporte de la corredera: 230 mm longitud de giro: 1000 mm altura central: 215 mm distancia central: 1000 mm diámetro del husillo: 56 mm rango de velocidad de giro: 19 - 2000 U/mínimo Requisito total de potencia: 7,5 kWweight de la máquina aprox. 1,9 dimensiones de la máquina L x Anchura x Alto: 2,78 x 1,25 x 1,40 m Accesorios: mandril de 3 mordazas 250 mmø, Poste de herramienta de 4 libras, sólido y estable. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

swing diameter: 530 mmturning diameter: 150 mmspindle passage: 65 mmcontrol: SIEMENS 840 C travel x1: 175 mmtravel y1: +/- 70 mmtravel z1: 433 mmtravel x2: 175 mmtravel y2: +/- 70 mmtravel z2: 433 mmspindle turning speed range: 38 - 4000 U/minC-axis: 2 x tool turret: 2 x 12 Pos.number of driven tool stations: 2 x 12 tool shaft (cylinder shaft DIN 69880): VDI 30 total power requirement: 33 kWdimensions of machine L x W x H: 3,95 x 2,49 x 2,6 mAccessories: collet fixtures on main spindle and sub spindle, one collet for main spindle and one for sub spindle, various tool holders (for driven tools as well), various spindle reductions, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mmturning length: 1000 mmcontrol: FAGOR control: CNC 8055/B-T centre height: 200 mmcentre distance: 1000 mmturning dia. over face-slide: 210 mmbed width: 300 mmspindle bore: 65 mmspindle turning speed range: 0 - 3000 U/mintransmission ratio: 2 feeds - longitudinal: 0 - 10.000 mm/minfeeds - cross: 0 - 10.000 mm/minrapid travel - longitudinal/face: 15 m/mintailstock quill diameter: 68 mmtailstock quill stroke: 155 mmtailstock taper MT: 4 total power requirement: 8 kWweight of the machine ca.: tdimensions: 3,1 x 1,9 x 1,78 mAccessories: 3-jaw chuck 200 mmø, MULTIFIX-tool post with various inserts, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 220 mmturning length: 250 mmcontrol: SIEMENS SINUMERIK 820 T swing diameter: 380 mmchucking diameter: 250 mmx-travel: 200 mmz-travel: 250 mmspindle turning speed range: bis 4000 U/minrapid travel - longitudinal/face: 15 m/mintotal power requirement: 27,5 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3,2 x 2,9 x 2,2 macc.: hydr. 3-jaw chuck, various tool holders for turret, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diámetro de torneado: 16 mm Paso del husillo: 16 mm Longitud de giro: 160 mm Control: GE FANUC Serie 18 I-T Rango de velocidad de giro: 8000 U/min. Giro rápido: 30 m/min. Potencia total: 2,2 kWweight de la máquina aprox. 2,1 tAccesorios: cargador de barras IEMCA, GENIUS 226-32 L, YOM 2002 (para diámetro de barra 2 - 26 mm y longitudes de barra 1500 - 3210 mm), Cinta de chips, refrigeranteLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

: neu : Bulgarien : 91920 €: 1737.29 €: 860 mm: 3000 mm: 430 mm: 135 mm: 620 mm: 560 mm: 11 : 140 M: 7 - 42, 28 - 170, 165 - 1 U/Min: 150 : 0.039 - 18 mm/U: 0.02 - 9 mm/U: 0.5 - 180 mm: 60 - 1/6 Gänge/: 0.125 - 45 : 240 : 435 mm: 150 mm: 105 mm: 6 MK: 225 mm: 15 kW: 4650 kgdriven by variable speed control (3 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)3-jaw chuck Bison3295/DIN6350, Ø 400 mmspindle dead centermain motor with frequency invertorfour way rapid traverse devicefoot pedal brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocktailstock quill reducermechanized movement of tailstocklow voltage machine lampoperating manualmachine ...

diámetro de torneado: 110 mm. Longitud de tornado: 450 mm. control: Siemens requerimiento total de potencia: kWpeso de la máquina, aprox. 9000 kg. Dimensiones de la máquina, aprox. m. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Diámetro de torneado: 160 mm. Longitud de tornado: 550 mm. control: Siemens consumo total de potencia: kWpeso de la máquina, aprox. 9000 kg. Dimensiones de la máquina. Ca.: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Diámetro de torneado: - mm Longitud de torneado: - MmSwing diameter sobre la corredera de la cama: - mmRequisito total de potencia: - kWweight de la máquina aprox: - tDimensiones de la máquina ca.: - mWEILER Bundle- RDU - LZ 330- 2 x Commodor- UD 24- DZ 67 V3. Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning diameter: 550 - 1100 mmclamping length: 1650 - 2400 mmguage width: 1435 mmmotor power: 60 (each Chuck) kwspindle turning speed range: 9 - 180 U/minworkpiece weight: 3500 kgtotal power requirement: 228 kVAweight of the machine ca.: 54 tdimensions of the machine ca.: 7,9 x 3,55 x 3,4 mThe Hegenscheidt-MFD portal wheel lathe is a wheel lathethat is easy to operate and maintain. Its portal design allows for wheel setsto roll through the lathe on shop rails. The mechanical elements and drive system are designed for cutting performance up to 32 mm² per tool post. This allows for a short floor-to-floor time for re-profiling, even for extreme wheelwear conditions.Mounted to each side of the portal type bed are the headstocks, with integrateddrivers, centers and a main drive system fitted to each headstock. Both headstocks are movable for ease of the load and unload functions.- Working R ...

turning diameter: 1000 mmturning length: 3000 mmcontrol: Siemens 828D turning diameter over bed: 1000 mmturning diameter over slide rest: 700 mmworkpiece weight: tspindle drive motor: 33,6 kWspindle turning speed range: 1 - 550 U/mincentre height: 510 mmx-axis: 520 mmz-axis: 3020 mmspindle bore: 260 mmspindle nose: A2-15 tailstock quill taper MT: 5 diameter of quill: 130 mmtailstock quill stroke: 200 mmrapid travel (x and z-axis): 8 m/mintotal power requirement: 40 kVAweight of the machine ca.: 12,2 tdimensions of the machine ca.: 7,52 x 3,2 m- Siemens 828D CNC- C-axis- 8-station tool turret with powered tools (VDI 50), 3000 rpm- Tailstock- Powered tool holders- Chip conveyor- CEOperating hours: 2000The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1930 mmturning diameter over slide rest: 1520 mmturning length: 5000 mmturning speeds: 0,5-250 U/minspindle bore: 105 mmworkpiece weight: 35 tsteady: 400-700 mmsteady: 700-1200 mmsteady: 1000-1600 mmcontrol: Siemens total power requirement: 106 kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamTh ...

diámetro de torneado: 480 mm, longitud de torneado: 800 mm. control: Sistema TX8F, diámetro de giro sobre la corredera: 240 mm, paso del husillo: 65 mm, diámetro de la manduca: 200 mm, velocidades de giro: 4000 U/min, capacidad de potencia: 30 kW, requisito total de potencia: kWpeso de la máquina, aprox. 4,3 tdimensiones de la máquina aprox. herramientas motorizadas. Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning diameter over bed: 1350 mmturning diameter over slide rest: 1020 mmcentre distance: 6000 mmturning speeds: 5-500(x24) U/minspindle passage: 120 mmturning dia. in gap: 1700 mmtotal power requirement: 27/41 kWweight of the machine ca.: tdimensions of the machine ca.: mPower compound4-jaw chuck, Ø 1.000 mmSteady rest, Ø 500 mmWork restRapid tool postCoolant systemRapid traverse2-Axis Trak D.R.O.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1400 mmswing diameter: 1600 mmturning height: 1200 mmturning speed range - milling: 1 - 240 U/minControl: Siemens SIN 820T ram head - cross travel: 1000 mmtotal power requirement: 55 kWweight of the machine ca.: dimensions of the machine ca.: mA.T.C. 12 positionsToolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 660 mmturning length: 2000 mmcontrol: Fagor 8050 turning diameter over bed slide: 370 spindle diameter: 104 mmtotal power requirement: 18 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.