tornos usadas para la venta (2,996)

turning diameter over bed: 2000 mmturning diameter over slide rest: 1050 mmturning length: 7000 mmspeed: 1,6 - 250 U/minvoltage: 380 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: max.: 4000 mmturning diameter over slide rest: . mmturning length: 7700 mmspeed: 0-750 u/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 800 mmturning diameter over slide rest: 540 mmturning length: 3500 mmturning dia. in gap: 1100 mmspindle diameter: 95 mmspeed: 6 - 630 (18x) U/minchuck diameter: 3-jaw 400 mmchuck diameter: 4-jaw 700 mmtotal power requirement: 22 kWweight of the machine ca.: tdimensions of the machine ca.: mPower compound4 way toolpostSteady rest Ø 400 mm3 Axis D.R.O.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 2400 mmturning length: 6000 mmcontrol: Siemens 880T Turning diameter over slide: 1400 spindle diameter: 320 mmspeed: 0.4 - 1000 m/minvoltage: 380 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2500 mmturning height: 1500 mmturning diameter over bed: 2700 mmturning speeds: 1,9 - 60 (16x) U/minvoltage: 380 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1020 mmturning diameter over slide rest: 620 mmturning length: 4000 mmturning dia. in gap: 1250 mmspindle diameter: 105 mmspeed: 8-1250 U/minvoltage: 380 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1170 mmswing diameter: 1520 mmturning height: 1000 mmstroke: 660 mmturning speed range - milling: 9 - 313 U/mintotal power requirement: 50 HPweight of the machine ca.: dimensions of the machine ca.: m4 positions turret on rail4 positions turret on side headPower elevating railThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 900 mmswing diameter: 1220 mmturning height: 810 mmstroke: 660 mmturning speed range - milling: 8 - 300 U/mintotal power requirement: 50 HPweight of the machine ca.: dimensions of the machine ca.: m4 positions turret on rail4 positions turret on side headPower elevating railThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2500 mmswing diameter: 2700 mmturning height: 1600 mmturning speed range - milling: 1,18 - 32,5 U/minturning speed range - milling: 4,25 - 117 U/minworkpiece weight: 10000 kgside head - cross travel: 800 mmram head - cross travel: 45 degrees - 1000 mmram head - cross travel: 30 degrees - 1000 mmtotal power requirement: 80 kWweight of the machine ca.: tdimensions of the machine ca.: m2-Axis D.R.O.5 positions turretThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2000 mmturning height: 1500 mmturning diameter over bed: 2400 mmtable load: 10 tturning speeds: 2 - 100 (18x) U/minvoltage: 380 Vram head - vertical travel: 1000 mmtotal power requirement: 45 kWweight of the machine ca.: 2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1420 mmturning diameter over slide rest: 1040 mmturning length: 6000 mmturning diameter in the gap: 1460 mmspindle bore: 150 mmSpeed: 2,5 - 500 (24x) U/min.total power requirement: 30 kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Carrera del husillo: 3000 mm carrera del husillo - máx.: 330 mm: 2820 Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

diámetro de torneado: - mmLongitud de giro: - mmcontrol: BOSCH CC 200 consumo total de potencia: - kWweight de la máquina aprox.: - tDimensiones de la máquina aprox.: - mMovie:https://www.youtube.com/watch?v=lr-NrroeTtAt Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Diámetro de torneado sobre la cama: 380 mm diámetro de giro sobre el reposacabezas: 190 mm longitud de torneado: 1000 mm Consumo total de potencia: 4 kWweight de la máquina aprox: 2 tDimensiones de la máquina aprox: 2,5+1+1,8 mPelícula: https://www.youtube.com/watch?v=ckpr4-sE7K4Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

diámetro de torneado: 220 mm longitud de giro: 450 mm. control: Siemens 840 D transmisión principal DC: 27 kW, consumo total de potencia: 27 + 8,5 + 5 + x kWweight de la máquina, aprox. 6,5 tdimensiones de la máquina, aprox: 10 x 2 x 2 m. Película: https://www.youtube.com/watch?v=OffdO1J4G5YTos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

x-travel: 185 mmz-travel: 360 mmb-travel: 460 mmcontrol: Mazatrol 640 T Maximum swing diameter: 550 mmMaximum turning diameter: 280 mmworkpiece weight max.: 200 kgbar capacity: 51 mmmain spindle speed: 35-6000 U/minmilling head speed: 25-4500 U/minrapid power traverse in X-and Z direction: 30/33 m/minRapid traverse B axis: 30 m/mintool turret: 12 Plätzeweight of the machine ca.: 4100 kgCapacity:Chuck size: 6 inchesMax. swing diameter: 550 mmStandard turning diameter: 221 mm Max. turning diameter: 280 mmMax. bar capacity: 51 mmDistance between spindle nose and turret edge: 80–535 mmMain spindle:Speed: 35–6000 rpmSpindle bore: 61 mmCounter spindle:Speed: 35–6000 rpmSpindle bore: 52 mmTurret:Number of tools: 12 piecesTool size: External turning t ...

altura central: 200 mm distancia central: 1.000 mm rango de velocidad de giro del husillo: 1600 U/diámetro mínimo: 42 mm longitud de giro: 1600 mm diámetro de giro sobre la cama: 410 mm: 230 mm peso de la máquina aprox.: 1,700 kg dimensiones: 2000 × 1000 × 1500 mm Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning diameter: 330 mmturning length: 669 mmcontrol: Sinumerik 828D total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Sinumerik 828D12-fold revolver Sauter VDI40driven toolsC-axis3-jaw chuckTool Eyepart catcherchip conveyortail stockcoolant device with high pressure pumpbar loading device IemcaTechnische Daten / technical details:Umlaufdurchmesser über Bett / rotary diameter over bed 600 mmmax. Drehdurchmesser / max. turning diameter 330 mmmax. Drehlänge / max. turning length 669 mmX-Weg / X-travel 260 mmZ-Weg / Z-travel 762 mmDrehzahl / spindle speed 3400 UpM /rpmWerkzeugrevolver / turret head 12 fach /holesmax. Stangendurchmesser / max. bar diameter 75 mmEilgang X / rapid feed X 20 m/minEilgang Z / rapid feed Z 24 m/min.Gewicht der Maschine ca. / weight ca. 5700 kgT ...

turning diameter over bed: 380 mmturning diameter over slide rest: 190 mmturning length: 1000 mmbar capacity: 56 mmturning speed range: 25 - 2000 U/minspindle nose: A2-6 total power requirement: 4,0 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: LBH ca. 2,5 x 1,2 x 1,8 m- RÖHM 3 Jaw Chuck Ø 250 mm- MULTIFIX Holder - Size B - Tailstock- Coolant pump with reservoir- Various turning tool holders- Various small partsWorkshop machineOtherwise, the gearbox runs quietly and the guides have no scratches, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 7100 mmswing diameter: 8000 mmturning height: 5030 mmdistance between table and cross rail: 5495 mmworkpiece weight: 200 tfaceplate turning speed range: 0,3 - 19 U/minmain drive motor: 125 kWcross travel: 4400 mmswivel range of slides - vertical: +30 / -15 °Control: FANUC 18i-TB total power requirement: ca. 155 kWweight of the machine ca.: 291 tdimensions of the machine ca.: 8,6 x 17,6 x 8,3 m2003 Retrofit and change to CNC- CNC Control Fanuc 18i-TB--2-Axis simultanous (X- & Z)- Z-Axe with hydraulic balance- Digital Scale in X and Z Axis- 2 rams on crossrailThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 410 mmy-travel: 570 mmz-travel: 140 mmcontrol: Mazatrol Matrix Maximum working diameter: 545 mmMaximum working length: 519 mmmain spindle speed: 35 - 6000 U/mintool taper: Capto C6 rapid traverse y/x/z axis: 30/26/33 m/minPerformance/capacity:Max. swivel range: 545 mmMax. machining diameter: 545 mmMax. outside diameter for bar work: 51 mmMax. machining length: 519 mmMax. workpiece weight:-Chuck work: 150 kg -Bar work: 200 kgMain spindle:Spindle speed: 35-6000 rpmSpindle bore diameter: 61 mmMax. torque: 161 NmTailstock:Rapid traverse: 8 m/minTravel range (advance/return): 434/281 mmMilling head:Milling head type: Single spindle with ATCTool shank type: Capto C6Tool size: External turning tool: 20 mm Internal turning tool: 32 mm Milling tool: Max. 90 ? x 200 long mmMilling s ...

turning diameter over bed: 410 mmturning diameter over slide rest: 220 mmturning length: 1000 mmcentre height: 205 mm: mmspindle bore: 46 mmspindle turning speed range: 40 - 2000 U/mintotal power requirement: 22,0 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,42 x 1,3 x 1,55 mmLathes with:- Copying attachment- Forkardt 3-jaw chuck F250- Multifix tool post- Coolant system- Machine light- Chuck guard- Chip tray- Chip guard wall- Foot brakeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 240 mmturning length: 530 mmcontrol: Siemens 810 D Powerline swing diameter: 560 mmx-travel: 207,5 mmz-travel: 530 mmturning speeds: 6000 U/min: 12 Stk. total power requirement: --- kWweight of the machine ca.: 6,1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: max. 450 mmchucking diameter: 400 mmcontrol: Siemens 840D (Index)Main spindle:: Max. rpm: 4.200 min/-1power capacity - main spindel: ( 35,5 / 56 ) kWmax. Torque: ( 340 / 550 ) NmC-Axis: 0,001 °turret:: number of toolpositions: 2x 12 posdriven statition: 2x 12 posworktool system: VDI 30 max. spindle speed driven tools: 6.000 U/min.power capacity - driven tools: 9,5 kWmax. Torque: 40%: 19 NmY - Axis: +/- 90 mmB-Axis: +270° / -90 °axis stroke:: x-axis: 730 mmz-axis: 340 mmy-axis: +/- 90 mmb-axis: +270° / -90 °feeds:: rapid traverse: X: 40 / Z: 30 m/minpallet changer:: numbers of pallets: 24 pos.size of pallet: 410 x 300 mmmax. workpiecediameter: 300 mmmax. workpiece weight: incl. Pallet: 25 kgChain width: 75 mmband speed: 7,5 m/mintotal power requirement: 56 kWweight of the machine ca.: 9,0 tdimensions of the machine ca.: 8,5 x 6,0 x 2,7 mDocuments: Chip conveyo ...

turning diameter: 300 mmturning length: 1700 mmswing diameter over bed slide: 600 mmtotal power requirement: 12,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 10000 mmswing diameter: 14000 mmturning height: 8000 mmControl: Siemens Sinumerik 840 D workpiece weight max.: 500 tfaceplate turning speed range: 0,2 - 35 U/mindrive motor: 300 kWram head dimension: 600 x 600 mmmax. ram stroke: 4000 mmmilling drive: 100 kWhob turning speeds: 3000 U/minrapid traverse x + z axis: 10 m/mintotal power requirement: - kWweight of the machine ca.: 350 tMachine has never been used and is still original, seaworthy packed andstored.equipped with:- CNC control Siemens Sinumerik 840 D- Hydrostatic axes- Hydrostatic table- Milling device- Hirth couplings for tool holderAcessories:• VERTICAL HEAD ISO50 BIG PLUS AD 8T5060164• VERTICAL HEAD ISO50 BIG PLUS AD 6000RPM 8T5060165• HORIZZONTAL HEAD ISO50 BIG PLUS 8T5060163• UNIVERSAL HEAD TU-50- ISO50 AD BIG PLUS 8T5060171• HEAD DANDREA UT-8-800-S 8T5060166• TOOL HOLDER DEVICE 8T1203783• T ...

turning diameter: 380 mmturning length: 580 mmswing dia.: 695 mmX-Axis movement: 234 mmY-Axis movement: 100 mmZ-Axis movement: 575 mmMinimum indexing C-Axis main Spindle: 0,0001 °Number of tools on turret: 12 Number of driven tools: 12 xSpindle speed driven tools: 4500 1/minSpindle motor driven tools: 5,5 / 3,7 kWTool type: Mazak VDI control: MATRIX NEXUS II Main Spindle:: Spindle Speed: 5000 1/minspindle motor: 26 / 22 kWspindle bore diameter: 76 mm2nd Spindle:: spindle turning speed range: 6000 U/minspindle motor: 11 / 7,5 kWspindle bore: 80 mmtotal power requirement: 43 kVAWeight: 5,5 tdimensions of the machine ca.: 2,8 x 2,1 x 1,9 m- Mazatrol Nexus II CNC control- Main and counter spindle- 12-station tool turret with driven tools and Y-axis- 3-jaw chuck-- Main: 8-- Counter: 6- Automatic presetting (Tool Eye).- Automatic workpiece catcher.- Side belt chip conveyor (Mayfran).- Enhan ...

turning diameter: 500 mmturning length: 1200 mmcontrol: Siemens 840D greates pass round over bed: 700 mmMain spindle:: turning speed range - main spindle: 20 - 5000 min/-1power capacity - main spindel: 25 /34 kWmax. Torque: NmC-Axis: 0,0001 °spindle diameter: 67 mmmilling spindle: milling spindle motor: 13 / 22 milling head speed: 12000 U/minb-axis: +/- 110 °axis stroke:: x-axis: 450 mmy-axis: +/- 100 mmz-axis: 1300 mmfeeds:: rapid traverse ( X / Y / Z ): 60 / 22,5 / 30 m/minfeed power: 5,6 / 5,6 / 7,4 kNturret:: number of toolpositions: 24 pos.tool taper: Capto max. chucking diameter: 250 mmtail stock: tailstock quill taper MT: 5 tailstock adjustment: 1200 mmtotal power requirement: 65 kVAweight of the machine ca.: 8 tdimensions of the machine ca.: 6 x 2,7 x 2,1 mCNC - Turning and milling centre - 5 axes simultaneous- CNC control Siemens 840D SolutionLine with ShopTurn- C-axis  ...

turning diameter: 340 mmturning length: 950 mmcontrol: OSP P300L turning diameter over bed: 580 mmturning dia. over face-slide: 470 mmWorkingspindle:: power capacity - main spindel: 22/15 kWturning speed range - main spindle: 45 - 5000 U/minspindle diameter: 120 mmspindle bore: 80 mmmax. bar capacity: 72 mmspindle head: JIS A2-6 spindle cone: 82 x 2° Torque: 350 Nmtravel -z axis: 1010 mmfeed per revolution: 0,001 - 1.000 mmrapid traverse: 30 m/minx - axis: travel -x axis: 260 mmfeed per revolution: 0,001 - 1.000 mmrapid traverse: 25 m/minC-Axis: 0,001 °Rapids C - Axes: 200 min -1rapid traverse: 12 m/miny-axis: 120 mmtotal power requirement: 31,7 kVAweight of the machine ca.: 4,6 tdimensions of the machine ca.: 2,2 x 1,8 x 1,8 mâ½ing and milling centreequipped with:- CNC control OSP P300L- NC tailstock- 12-position turret with driven tool station (BMT 60) 6000 rpm- C, Y-axis- Chip ...

diámetro de torneado: 540 mm. Longitud de tornado: 1520 mm. Control: Fanuc 18i-TB consumo total de potencia: kWpeso de la máquina, aprox. 15500 kg. Dimensiones de la máquina. Ca.: m. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.