tornos usadas para la venta (3,110)

turning diameter: 255 mmturning length: 500 mmcontrol: FANUC 31i model B Drive tool: 18Kw spindle drive: 15/11 und 7,5/5,5 kWrapid traverse Z-axis: 20 m/minrapid motion - y-axis: 12 m/minrapid traverse X-axis: 16 m/minrapid traverse X-axis: 16 m/minspindle nose: A2-8/A2-6 bar material dia.: 66 mmcentre distance: 639 mmChip coveyor: swing dia.: 270 mmtotal power requirement: 65 kWweight of the machine ca.: 9,6 tdimensions of the machine ca.: 2,85 x 2,2 x 2,05 m-Two 12-station turrets (24 positions total), each with 12 driven tool stations-Y-axes on both turrets-Sub-spindle travel: 635 mm-Sub-spindle rapid traverse: 30 m/min-Travel – X (Turrets 1 & 2): 190 mm-Travel – Y (Turrets 1 & 2): ±40 mm-Travel – Z (Turrets 1 & 2): 500 mm-Spindle speeds – infinitely variable (S1 / S2): 4,000 / 5,000 rpm-Spindle bearing diameter: 120 / 100 mm, C-axis: 0.001°-Turret 1 stations / driven stat ...

turning diameter: 200 mmturning length: 393 mmcontrol: Siemens 810D total power requirement: kWweight of the machine ca.: 3200 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 2500 mmturning diameter over slide: 1800 mmturning length: 25000 mmcentre height: 1250 mmWerkstückgewicht max. ohne Lünette: 70000 kgspindle diameter in front bearing: 500 mmspindle turning speed range: 0,45 - 90 U/minfaceplate diameter: 2480 mmlongitudinal feeds:: 0,125 - 48 mm/Urapid traverse of slide: 3000 mm/minmetrical thread cutting: 1 - 22 mm/Uthreading WHITWORTH: 2 - 23 G/Control: Siemens 840 main drive motor: 80 kWtotal power requirement: kWweight of the machine ca.: 146,5 tdimensions of the machine ca.: 17,3 x 4,9 x 2,5 mUpgraded in 2007- Siemens 840D CNC control system- Faceplate- Support- Columnes- 4-way bed configurationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 4000 mmturning diameter over slide rest: 3500 mmturning length: 30000 mmcentre height: 2000 mmworkpiece weight: 160 tbed width: - mmbed height over floor: - spindle turning speed range: 0,5 - 80 U/minmain drive motor: - kWfaceplate diameter: - mmControl: Siemens 840D total power requirement: - kVAweight of the machine ca.: 160 t2006 modernized/Overhauled and equipped with:- 4-guides bedway- CNC Control Siemens 840D- Face Plate- Counter StayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-49836-29

Torno convencional de husillo de plomo y tensión del fabricante alemán Heidenreich & Harbeck (VDF), Hamburgo, torno clásico de fabricante de herramientas con cama endurecida y mecanismo de alimentación y corte de rosca. La máquina está equipada con un portaherramientas Multifix de cambio rápido (tipo B) y cuenta con una amplia gama de accesorios, incluyendo armario de herramientas y paquete de portatornados. Eléctrico: Voltaje de funcionamiento: 380 VCorriente de control: 220 VFrecuencia: 50 HzCorriente total: aprox. 4 AEquipamiento: Portaherramientas de cambio rápido Multifix tipo Bvarios portaportaherramientas rotatorios y portabrocasForkardt de 3 mordazas Ø200 mmArmario de herramientas clásico de alimentación VDF y caja roscada Auction-ID: A7-49942-600

Auction-ID: A1-49836-30

Incluyendo accesorios, que consisten en: entre otros. Amplia colección de dispositivos de sujeción 1 estante de almacenamiento con contenido, dimensiones (LxLxH) aprox: 1350x880x1100 mm Aproximadamente 11 portaherramientas (acopladores rápidos) 1 armario con contenido, dimensiones (LxLxH) aprox: 920x460x1080 mm Auction-ID: A1-49926-6

Auction-ID: A7-49882-106

Auction-ID: A1-49836-6

Auction-ID: A1-48649-21

turning diameter over bed: 330 mmturning diameter over slide rest: 195 mmturning length: 750 mmcenter height over bed: 160 mmcentre distance: 650 mmdigital readout: 3 Achsen HEIDENHAINbed width: 205 mmspindle bore: 36 mmspindle taper: KK5 DIN 55027turning speed range: 48 - 2500 U/minpower requirement: 3,0 kW4-jaw-chuck diameter: 160 mmquick change toolholder: MULTIFIX Typ Ataper in tailstock-quill: MK 3 dia. of quill: 40 mmquill stroke: 100 mmvoltage: 400 Vtotal power requirement: 3,2 kWweight of the machine ca.: 680 kgdimensions of the machine ca.: 1,60 x 0,80 x 1,55 m- Serial-No.: 4432- HEIDENHAIN 3-axis digital readout- MULTIFIX quick-change tool holder- Collet chuck including collets Ø 8 - Ø 27 mm- Face plate Ø 250 mm- Quick-action drill chuck- Center pointThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-49836-54

Incluyendo DSL - AES-GAMMA 30 - Succión Auction-ID: A1-49926-7

Auction-ID: A1-48649-19

Incluyendo DSL - AES-GAMMA 30 - Extracción, Portaherramientas de lote mixto Auction-ID: A1-49926-8

Auction-ID: A1-49836-10

Auction-ID: A1-49836-55

- Distancia máxima entre puntos aprox. 6000 mm. - Volteo sobre bancada aprox. 740 mm. - Volteo sobre carro aprox. 420 mm. - Anchura de la bancada 510 mm. - Diámetro de paso de barra aprox. 80 mm. - 18 velocidades de giro desde 16 rpm hasta 1250 rpm. - Potencia del motor 18 KW. - Plato de 3 garras, diámetro 400 mm. - Visualizador digital de 2 ejes (X,Z) FAGOR 20i-T. - Equipado con 2 lunetas. - Condiciones de funcionamiento de esta máquina: sin comprobar. Auction-ID: A7-48839-23

- Distancia máxima entre puntos aprox. 1300 mm. - Volteo sobre bancada aprox. 500 mm. - Volteo sobre carro aprox. 240 mm. - Anchura de la bancada 420 mm. - Diámetro de paso de barra aprox. 50 mm. - 18 velocidades de giro. - Plato de 3 garras, diámetro 315 mm. - Visualizador digital de 2 ejes HEIDENHAIN. - Condiciones de funcionamiento de esta máquina: sin comprobar. Auction-ID: A7-48839-40

defectuoso incluyendo transportador de astillas BMF SPE 63/30 225-Z60 Auction-ID: A1-49926-59

Torno central GRAZIANO SAG210 Tipo: Torno central Fabricante: GRAZIANO Modelo: SAG210 Año de fabricación: 1995 Velocidad máxima: 1800 rpm Conexión eléctrica: 380 V Peso aproximado de la máquina: 2850 kg Dimensiones aproximadas (L x Anor x Ar): 3200 x 1600 x 1500 mm Balanceo sobre la cama: 500 mm Carro basculante: 280 mm Distancia entre centros: 1500 mm Funcionalidad no probada Este artículo se entrega cargado en camión. Los costes de desmantelamiento y carga se especifican como costes adicionales. Auction-ID: A1-49922-37

: gebraucht : 2011 : 010192 : prompt, Zwischenverkauf v : Deutschland : 24100 €: 1 : 320 mm: 650 mm: 160 mm: 40 mm: 192 mm: 205 mm: 5 : 5 MK: 16 : 48 - 2500 1/min: 24 : 0.02 - 0.63 mm/U: 0.006 - 0.2 mm/U: 0.25 - 8 mm: 80 - 2 Gänge/: 0.2 - 4 : 200 - 5 : 150 mm: 100 mm: 40 mm: 3 MK: 85 mm: 2,4 / 3 kW: 1582 mm: 715 mm: 1245 mm: 720 kgHeidenhain 3-axis digital readoutNEW Röhm 3-jaw chuck, 160 mm diameter, with internal and external jawsQuick-change tool post with one rectangular insert and one round insertQuick-release collet chuck with collets from 3 to 29 mm diameter (in 1 mm increments)Live centreDrill chuckChuck guardLead and feed screw guardMotor brakeCoolant systemMounting feetOperating instructions in German with CE declaration of conformityBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGH ...

: gebraucht : 2001 : 010191 : prompt, Zwischenverkauf v : Deutschland : 22100 €: 1 : 320 mm: 650 mm: 160 mm: 40 mm: 192 mm: 205 mm: 5 : 5 MK: 16 : 48 - 2500 1/min: 24 : 0.02 - 0.63 mm/U: 0.006 - 0.2 mm/U: 0.25 - 8 mm: 80 - 2 Gänge/: 0.2 - 4 : 200 - 5 : 150 mm: 100 mm: 40 mm: 3 MK: 85 mm: 2,4 / 3 kW: 1582 mm: 715 mm: 1245 mm: 720 kgHeidenhain 3-axis digital readoutNEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jawsQuick-change tool post with one rectangular insert and one round insertQuick-release collet chuck with collets from 3 to 30,5 mmLive centreDrill chuckChuck guardLead and feed screw guardMotor brakeCoolant systemMounting feetOperating instructions in German with CE declaration of conformityBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and funct ...

: gebraucht : 1992 : 010190 : prompt, Zwischenverkauf v : 17900 €: 1 : 320 mm: 650 mm: 160 mm: 40 mm: 192 mm: 205 mm: 5 : 5 MK: 16 : 48 - 2500 1/min: 24 : 0.02 - 0.63 mm/U: 0.006 - 0.2 mm/U: 0.25 - 8 mm: 0.2 - 4 : 150 mm: 100 mm: 40 mm: 3 MK: 85 mm: 2,4 / 3 kW: 1582 mm: 715 mm: 1245 mm: 680 kgHeidenhain 3-axis digital readoutNEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jawsQuick-change tool post with one rectangular insert and one round insertQuick-release collet chuck with various collets from 1 to 27 mmLive centreDrill chuckChuck guardLead and feed screw guardMotor brakeCoolant systemMounting feetOperating instructions in GermanBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live te ...

turning diameter: 300 mmturning length: 284 mmcontrol: Fanuc x-axis: 170 mmz-travel: 335 mmtotal power requirement: kWweight of the machine ca.: 3200 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 65 mmMax. Turning length: 450 mmSpindle diameter in forward position: 110 mmcontrol: System TX8 I number of spindle speeds: 4.000 U/minCNC lathe | TNC 42/65 - 2007 equipped with bar loader.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: TNC65 | TNC-65 |TNC 42-65 | TNC 42/65The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 170 mmMax. Turning length: 120 mmbar capacity: 52 mmcontrol: FANUC MSX-501 travel -x1 axis: 140 mmtravel -x2 axis: 140 mmtravel -z1 axis: 450 mmtravel -z2 axis: 410 mmtravel -y axis: +/- 40 mmtravel - b axis (spindle 2): 525 mmspeeds station 1: 60 - 6000 U/minspindle bore 1: 62 mmspeeds station 2: 60 - 6000 U/minspindle bore 2: 62 mmdriven tools turning speeds: 6.000 U/minCNC Turning- and Milling Center | ZT 1500 Y - 2005 equipped with 2 turrets for driven tools, Y-axis and bar loader.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: ZT1500Y | ZT-1500 Y | ZT 1500Y | ZT-1500-YThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 210 mmx-travel: 400 mmz-travel: 200 mmcontrol: FANUC Series 32i Model A weight of the machine ca.: ~ 5.500 kgVertical Turning Machine | EMAG - VL 3 + VL 3The machine is in a well-maintained condition.Please note that the technical details were added from comparable machines.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: VL3 | VL-3The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 210 mmx-travel: 400 mmz-travel: 200 mmcontrol: SIEMENS SINUMERIK 840D sl weight of the machine ca.: ~ 5.500 kgVertical Turning Machine | EMAG - VL 3 + VL 3 YThe machine is in a well-maintained condition.Please note that the technical details were added from comparable machines.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: VL3 | VL-3The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.