tornos usadas para la venta (3,058)

turning diameter: 240 mmturning length: 530 mmcontrol: Siemens 810 D Powerline swing diameter: 560 mmx-travel: 207,5 mmz-travel: 530 mmturning speeds: 6000 U/min: 12 Stk. total power requirement: --- kWweight of the machine ca.: 6,1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 50390 €: 952.37 €: 500 mm: 1500 mm: 250 mm: 75 mm: 300 mm: 400 mm: 8 : 80 M: 3 : 25-100, 100-400, 500-2000 U/Min: 120 : 0.04 - 12 mm/U: 0.02 - 6 mm/U: 0.5 - 120 mm: 60-1/4 Gänge/: 0.125 - 30 : 240-1 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 11 kW: 3100 mm: 1250 mm: 1400 mm: 2800 kgdriven by variable speed control (3 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 250 mmspindle dead centerlongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length 1.000 mm € 49 250,00 turn ...

: neu : Bulgarien : 24940 €: 478.85 €: 325 mm: 750 mm: 165 mm: 32 mm: 190 mm: 200 mm: 5 : 4,5 M: 2 : 85-405, 470-2200 U/Min: 48 : 0.006 - 1.77 mm/U: 0.003 - 0.885 mm/U: 0.1 - 28 mm: 0.1 - 1.75 : 70 - 4 : 150 mm: 95 mm: 40 mm: 3 MK: 100 mm: 2.2 kW: 2150 mm: 950 mm: 1350 mm: 770 kgdriven by variable speed control (2 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 160 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.000 mm € 25.360,-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : Bulgarien : 40850 €: 780.24 €: 400 mm: 750 mm: 200 mm: 52 mm: 235 mm: 320 mm: 6 : 6 M: 4 : 18-98, 48-265, 144-790, 3 U/Min: 80 : 0.015 - 0.6 mm/U: 0.0075 - 0.3 mm/U: 40 : 0.25 - 7.5 mm: 120 - 4 Gänge/: 0.0625 - 1.875 : 235 mm: 110 mm: 50 mm: 4 MK: 100 mm: 7.5 kW: 1530 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 200 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length 1.000 mm € 41.580,-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

turning diameter: 430 mmturning length: 900 mmswing diameter: 800 mmworkpiece weight: 900 kgx-travel: 360 mmz-travel: 900 mmcontrol: Siemnens type: 840 D SE mmturning speeds: 2600 U/minSpindle capacity: 28/35 KWTorque: 175/875 NmTool bore: VDI 40 Tool changer: 16 power chuck: SMW BH D 400tail stock: Automatisch diameter of quill: 110 mmquill stroke: 100 mmquill:: MK 4 steady: SMW c-axis: live tooling: chip conveyor: coolant: total power requirement: 97 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 7,7x1,98x2,115 mClamping force control via differential pressure Autolok D050-200 D50-200 control Siemens 840D control with shop turn programming C axis for spindle including software option Transmit cylinder interpolationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: max. 450 mmchucking diameter: 400 mmcontrol: Siemens 840D (Index)Main spindle:: Max. rpm: 4.200 min/-1power capacity - main spindel: ( 35,5 / 56 ) kWmax. Torque: ( 340 / 550 ) NmC-Axis: 0,001 °turret:: number of toolpositions: 2x 12 posdriven statition: 2x 12 posworktool system: VDI 30 max. spindle speed driven tools: 6.000 U/min.power capacity - driven tools: 9,5 kWmax. Torque: 40%: 19 NmY - Axis: +/- 90 mmB-Axis: +270° / -90 °axis stroke:: x-axis: 730 mmz-axis: 340 mmy-axis: +/- 90 mmb-axis: +270° / -90 °feeds:: rapid traverse: X: 40 / Z: 30 m/minpallet changer:: numbers of pallets: 24 pos.size of pallet: 410 x 300 mmmax. workpiecediameter: 300 mmmax. workpiece weight: incl. Pallet: 25 kgChain width: 75 mmband speed: 7,5 m/mintotal power requirement: 56 kWweight of the machine ca.: 9,0 tdimensions of the machine ca.: 8,5 x 6,0 x 2,7 mDocuments: Chip conveyo ...

Diámetro de torneado: 200 mm. Longitud de giro: 1000 mm. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning diameter: 300 mmturning length: 1700 mmswing diameter over bed slide: 600 mmtotal power requirement: 12,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 570 mmturning length: 1500 mmcontrol: Sinumerik 840 D SL swing diameter over face slide: 365 mmbed width: 360 mmspindle bore: 62 mmspindle turning speed range: 6 - 2500 U/mintransmission ratio: 2 rapid travel - longitudinal/face: 10 / 5 m/minmax. workpiece weight -without tailstock: 400 kgmax. workpiece weight between centres: 1000 kgmax.workpiece weight:each extra steadyrest: 300 kgtailstock quill diameter: 100 mmtailstock quill stroke: 190 mmpower capacity: (60/100 % ED) 25 / 20 kWmax. torque on the spindle: 1800 / 1400 Nmtotal power requirement: kWweight of the machine ca.: 5,2 tdimensions of the machine ca.: 4,33 x 2,15 x 2,00 mApprox. 3.300 spindle running hoursWith documentation, chip conveyor, steady-rest, accessories (see picture)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Torno CNC tipo CNC-MW28H-OS6 Mecanizado de llantas de hasta 28\" es posible Mandril manual con 6 mordazas Sistema automático de sondeo para detectar el contorno del borde Software para optimización y vuelcos desiguales Base de datos para archivar contornos de rueda Control automático de velocidad del eje Portaherramientas manual de 4 órdenes Ejes X y Z con servomotores Diseñado para el mecanizado húmedo de llantas de aleación Totalmente conformes con CE ---------------------------------------------------------------------- ---- Auction-ID: A1-44315-3

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 107970 €: 2040.63 €: 800 mm: 2000 mm: 400 mm: 315 mm: 560 mm: 560 mm: 318 M: 12 : 8 - 400 1/min: 152 : 0.039 - 15 mm/U: 0.02 - 7.5 mm/U: 76 : 0.5 - 150 mm: 60 - 1/5 Gänge/: 0.125 - 37.5 : 240 - 4/5 : 410 mm: 150 mm: 105 mm: 6 MK: 225 mm: 11 kW: 6100 kgTheir main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry.Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters.The clamping of the pipes with two universals and stands allows the processing of long pipes.These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities.Drive via gearboxElectrodynamic brake3-axis digital display FagorQuick-change tool holder Amestra type C, system like Multifix in ...

Tipo de máquina: torno CNC de torneado facial (torno de torneado frontal) Año de construcción: 1998 Control: Siemens Sinumerik 810D Área de trabajo: Eje X: 3000 mm Eje Z: 600 mm Aplicación: plásticos, aluminio, metales ligeros, madera Eléctrico: 230/400V – 50 Hz Vende el torno frontal de Irle con control de Siemens X 3000 mm Z 600 mm Para procesar plásticos, aluminio, metales ligeros, madera, etc. etcétera. Precio con factura + IVA desde el suelo del salón Desmontar y cargar uno mismo El desmantelamiento y el transporte pueden organizarse a cambio de un coste adicional Ver imágenes Sin garantía puede verse bajo el poder Auction-ID: A7-44547-1

Auction-ID: A7-44480-1

Auction-ID: A7-44325-446

Auction-ID: A7-44325-455

Datos técnicos Longitud máxima de giro: 1000mm Característica Valores típicos: Ø circulante sobre la cama aprox. 500 mmSobremarcha: ~8 m/min (X) · ~10 m/min (Z) Quill en la clavija: Ø 80 mm, impacto ~180 mm Conexión eléctrica: 3 fasesFusible principal: 25-80APotencia aparente nominal: 14-24-49 kVAElementos operativos importantes Botón de parada de emergencia para parada inmediata Arranque/parada del husillo y selección de velocidad Ajuste de ejes (X y Z) manualmente o mediante programa Selección de ciclos para control CNC MANUAL Inicio/parada de la pieza de alimentaciónCero puntos & Peso de viaje de referencia: aprox. 3.000 – 5.200 kg Auction-ID: A1-43917-2

Auction-ID: A1-43934-32

Auction-ID: A1-43934-22

Auction-ID: A7-44294-1

Auction-ID: A1-43934-37

Auction-ID: A7-44294-10

Auction-ID: A1-43934-16

Diámetro del swing aprox: d530 Distancia entre centros: 2000mm Diámetro del mandri: d250mm Sistema de medición Fuente de alimentación: 400V Auction-ID: A7-44233-4

TORNO CENTRAL KNUTH DL 550 / 1500 B con gran máquina giratoria Balanceo sobre la cama de diámetro 1100 mm Diámetro de la corredera transversal sobre la corredera transversal de 1590 mm Oscilación en la brecha de diámetro 1270 mm Diámetro del husillo 105 mm Ancho de la cama: 550 mm Longitud x ancho x altura: 3510 x 1590 x 1760 mm Peso: 5250 kg Auction-ID: A7-44495-4

: gebraucht : 2020 : 1658 : prompt, Zwischenverkauf v : Bulgarien : 26500 €: 1 : 22600 €: 400 mm: 1000 mm: 200 mm: 52 mm: 235 mm: 320 mm: 6 : 6 M: 12 : 50-2.240 1/min: 80 : 0.015 - 0.6 mm/U: 0.0075 - 0.3 mm/U: 40 : 0.25 - 7.5 mm: 120 - 4 Gänge/: 0.0625 - 1.875 : 235 mm: 110 mm: 50 mm: 4 MK: 100 mm: 4 kW: 2750 mm: 1100 mm: 1600 mm: 1540 kgThis machine is used in our workshop for repair work,therefore it has only been used very little so far.(New price € 36,070.00)driven by manual transmission3-axes digital readout Fagor 40iquick change toolpostMultifix Type Bwith4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 200 mmspindle noseNr. 6 DIN 55027four way rapid traverse devicespindle dead centercoolant equipment1 pce. flange plate for lathe chuckØ 200 mm1 adapter sleevefull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardl ...

Altura del centro de datos mecánico principal sobre la cama: 260 mmAncho central (distancia entre centros): 1500 mmDiámetro circunferencial sobre la cama: aprox. Ø 520mm Ancho de cama: aprox. 400mm Diámetro del husillo (pasaje) aprox. Ø 80mm Dimensión hasta el punto más alto: 1640, accesorios incluidos Auction-ID: A1-43917-6

: neu : Bulgarien : 133520 €: 2523.53 €: 1320 mm: 3000 mm: 625 mm: 155 mm: 940 mm: 700 mm: 15 : 160 M: 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min: 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 1/16 - 60 Gänge/: 0.125 - 120 : 685 mm: 270 mm: 125 mm: 6 MK: 260 mm: 30 kW: 8550 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 118 670,00 turning length4.000 mm € 141 700,00 turnin ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 107870 €: 2038.74 €: 800 mm: 2000 mm: 400 mm: 260 mm: 560 mm: 560 mm: 318 M: 12 : 8 - 400 1/min: 152 : 0.039 - 15 mm/U: 0.02 - 7.5 mm/U: 76 : 0.5 - 150 mm: 60 - 1/5 Gänge/: 0.125 - 37.5 : 240 - 4/5 : 410 mm: 150 mm: 105 mm: 6 MK: 225 mm: 11 kW: 6000 kgTheir main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry.Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters.The clamping of the pipes with two universals and stands allows the processing of long pipes.These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities.Drive via gearboxElectrodynamic brake3-axis digital display FagorQuick-change tool holder Amestra type C, system like Multifix in ...

faceplate diameter: 10000 mmswing diameter: 14000 mmturning height: 8000 mmControl: Siemens Sinumerik 840 D workpiece weight max.: 500 tfaceplate turning speed range: 0,2 - 35 U/mindrive motor: 300 kWram head dimension: 600 x 600 mmmax. ram stroke: 4000 mmmilling drive: 100 kWhob turning speeds: 3000 U/minrapid traverse x + z axis: 10 m/mintotal power requirement: - kWweight of the machine ca.: 350 tMachine has never been used and is still original, seaworthy packed andstored.equipped with:- CNC control Siemens Sinumerik 840 D- Hydrostatic axes- Hydrostatic table- Milling device- Hirth couplings for tool holderAcessories:• VERTICAL HEAD ISO50 BIG PLUS AD 8T5060164• VERTICAL HEAD ISO50 BIG PLUS AD 6000RPM 8T5060165• HORIZZONTAL HEAD ISO50 BIG PLUS 8T5060163• UNIVERSAL HEAD TU-50- ISO50 AD BIG PLUS 8T5060171• HEAD DANDREA UT-8-800-S 8T5060166• TOOL HOLDER DEVICE 8T1203783• T ...

turning diameter: 380 mmturning length: 580 mmswing dia.: 695 mmX-Axis movement: 234 mmY-Axis movement: 100 mmZ-Axis movement: 575 mmMinimum indexing C-Axis main Spindle: 0,0001 °Number of tools on turret: 12 Number of driven tools: 12 xSpindle speed driven tools: 4500 1/minSpindle motor driven tools: 5,5 / 3,7 kWTool type: Mazak VDI control: MATRIX NEXUS II Main Spindle:: Spindle Speed: 5000 1/minspindle motor: 26 / 22 kWspindle bore diameter: 76 mm2nd Spindle:: spindle turning speed range: 6000 U/minspindle motor: 11 / 7,5 kWspindle bore: 80 mmtotal power requirement: 43 kVAWeight: 5,5 tdimensions of the machine ca.: 2,8 x 2,1 x 1,9 m- Mazatrol Nexus II CNC control- Main and counter spindle- 12-station tool turret with driven tools and Y-axis- 3-jaw chuck-- Main: 8-- Counter: 6- Automatic presetting (Tool Eye).- Automatic workpiece catcher.- Side belt chip conveyor (Mayfran).- Enhan ...