trabajo con chapas de metal usadas para la venta (3,366)

: neu : ca. 10 Wochen ab Auftrags : Türkei : 59900 €: 1132.11 €: 2050 mm: 3 mm: 2 mm: 4 mm: Motorisch : 3350 mm: 2200 mm: 1900 mm: 3800 kg: 1000 mmCNC control with tabular programming- 15,6", touchscreen controller on swivel arm- tabular programming by entering the axes values- open or drop hemming function- multi radius bending function as by pressing or by bending- programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length- piece counter- autorisiation with password- 128GB HDD allows almost unlimited data storage- remote service connection via WLAN- detailled alarm, tool and paramter pageMotorized drive (servo motors) of the upper and bending beam (Z and Y axes)Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration,with ball rollers in the sheet metal insertsUp ...

sheet width: 2100 mmplate thickness: 8,0 mm STpre-bending: 6,0 mm STdiameter of upper rolls: 190 mmside roll diameter: 150 mmdiameter of lower rolls: 170 mmtotal power requirement: 3,0 kWweight of the machine ca.: 3.290 kg.dimensions of the machine ca.: 4042 x 1380 x 1254 mmFurnishing:- electro-hydraulic 4-roller bending machine- 2x driven main rollers (upper & lower roller)- with hydraulic conical bending device- Induction hardened rollers- including straightening function for welded pipes- Control unit / display with touch screen function digital position display for the two side rollers- mobile control panel- 2x bending speeds selectable- hydraulic folding bearing- Safety device (safety line with switch unit)- Pressure gauge / pressure indicator for the rollers- CE mark + declaration of conformity- Operation manualThe data for this ad was created with ModulMWS - the software solution  ...

tube diameter: 33,7 x 3,4 GAS mmtube diameter: 35,0 x 2,5 STAHL mmtube diameter: 35,0 x 1,5 EDELST mmbending radius min.: R10 - R 190 mmbending angle max.: 0 - 180 °tool taper: 6-kant 40 mmvoltage: 230 Vtotal power requirement: 0,9 kWweight of the machine ca.: 23,0 kgDescription:- MediBender 070 digital- with maximum bending performance for 35 x 2.5 mm steel tubes- Excellent bending quality with very tight bending radii. (from 2 x tube diameter) and bending angles between 0° and 180°- Easy to operate- High accuracy and reliability- Fast tool changes (within seconds)- Easy to transport- Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0007 : 217 €: 1 : 835 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 32 /minPunching force: 60 to throat: 250 mm: bis max. Ø 40x11 mm: 350x15 mm: 350x15 mmL-beam 90°: 120x120x10 mm: 45 mmsquare edge steel: 40 mm: 10 mm: Aufnahme bis max. 150x10 engine output: 5,5 kWweight: ca. 1600 kgBasic equipment:- Flat steel shears with knife set- Angle shears with knife set- Punch with quick release device for punches up to 40 mm- Support table for punching device- Triangular notching device- Support table for notching- bending station- Bending stamp with matrices V 40 and V 70- electrical contact stop (1 meter)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0039 : 180 €: 1 : 415 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 32 /minPunching force: 60 to throat: 500 mm: 40x11 mm: 350x15 mm: 350x15 mmL-beam 90°: 120x120x10 mm: 45 mmsquare edge steel: 40 mm: 10 mm: Aufnahme bis max. 150x10 engine output: 5,5 kWweight: 2012 kgBasic equipment:- Flat steel shears with knife set- Angle shears with knife set- Punch with quick release device for punches up to 40 mm- Support table for punching device- Triangular notching device- Support table for notching- bending station- Bending stamp with matrices V 40 and V 70- electrical contact stop (1 meter)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 35.0 tchamfer lenght: 1250 mmdistance between columns: 1095 mmstroke - stepless adjustable: 215 mmcolumn arm: 410 mmtable height: 800 mmdayligth: 455 mmworking feed: 10.0 mm/secreturn speed: 56.0 mm/secwork height max.: ca. 875 mmControl: DM 51 Number of working hours: ~ 13.300 hoil volume: 80.0 loperating pressure: max. 240 barvoltage: 380 Vtotal power requirement: 4.0 kWweight: 2500 kgrange L-W-H: 1700 x 1450 x 2250 mm- in checked conditions - machinevideo - https://www.youtube.com/watch?v=Gn6PZEMmnmYFeatures:- Robust CNC-controlled hydraulic press brake- With DELEM CNC control unit DM 51” Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Program + tool storage possible Swiveling control panel, front left- CNC electric motor-driven backgauge (X axis)- CNC electric motor-driven height adjustment of the stop (R axis)- 2x manually adjustabl ...

: gebraucht : WA0143 : 690 €: 1 : 3100 mm: 90 mm: 25 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 28 min.Punching force: 110 to: 40x20 mmflat steel: 600x15 oder 400x20 mmL-beam 90°: 160x160x16 mmL-beam 45°: 70x70x7 mm: 50 mmsquare edge steel: 50 mm: 13 mmthroat: 300 mmBasic equipment:- Complete set of blades for flat steel shears- Complete knife set for bar cutter- Complete knife set for angle steel shears- Compl. Standard punching device- Stamp quick release device for punches up to 40 mm diameter- Rectangle notch compl. with hold downs- Complete knife set below for rectangular notching- Upper tool for rectangular notching- Support table for flat material- Punching table with stop- Notch with stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

punching pressure: 28.0 tpunching cross-cut in cmm: 31 in 7.0 mm STthroat: 250 mmdayligth: 223 mmno. of strokes: 10 - 30 Hub/minoil volume: 32.0 ltr.work height max.: 1033 mmtotal power requirement: 3.0 kWweight of the machine ca.: 553 kgdimensions of the machine ca.: 730 x 540 x 1530 mFurnishing:- Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm- Free: LED lighting in the punching area- Swiveling scraper (plates exchangeable)- Various material support tables are available separately- Brace- 2-step foot switch, with double press for grain search function- electrical controls- Stroke length and stroke position continuously adjustable- integrated hydraulic unit with oil filling- Performance specifications apply to a material strength of 450 N/mm²- Main connection cable and plug for 16 amps are not included in ...

sheet width: 1250 mmplate thickness: 5,5 mmpre-bending: 5,0 mmroll length: 1280 mmmin. dia.: 210 mmroll diam. toproll: 140 mmweight: 1365 kgrange L-W-H: 2.020 x 900 x 1.200 mmStandard features:- Central rollers via electric motor, planetary reduction gear andGear drive driven- Swivel top roller- Main engine with brake device- Conical bending device- Mobile controller and foot pedal- CE mark / Declaration of ConformityAdditional equipment:- motorized rear roller adjustment- Digital display for back roller- induction hardened rollsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I - beam section - flat steel: 140 x 140 x 13 mmI-beam section - upend: 120 x 120 x 13 mmL-beam: 130 x 130 x 12 mmround bar steel: 85 mmbending capacity - flat iron: 125 25 mmflat steel: 65 x 65 mmincluding various rollers:Pipe Ø:219 mm (tool/roller Ø 535 mm)140 mm (tool/roller Ø 420 mm)273 mm (tool/roller Ø 520 mm)203mm168.3 mm (tool/roller Ø 500 mm)75 mm (tool/roller Ø 400 mm)49 mm (tool/roller Ø 420 mm)48.3 mm (tool/roller Ø 420 mm)22.5 mm (tool/roller Ø 420 mm)32/32.5 mm (tool/roller Ø 420 mm)60 mm (tool/roller Ø 420 mm)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 400 mmplate thickness: 4 mmweight of the machine ca.: 0.3 tdimensions of the machine ca.: 0.5x1x2.2 mwww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: 620 mmstroke: 0-100 mmhole diameter in sheet thickness: 40 in 20 mmno. of strokes: 49 Hub/minControl: total power requirement: 15 kWweight of the machine ca.: 3.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 6.5 mmthickness at Niro-steel: 5.0 mmangle adjustable from - to: 30 - 140 Gradno. of strokes: ca. 50 Hub/mintable:: 950 x 1030 mmblade length: 220 x 220 mmtotal power requirement: 4.0 kWweight: 800 kgrange L-W-H: 1100 x 950 x 1280 mm current new price approx. 20.000 euros good condition () special price on requestEquipment:- electro-hydraulic notching machine- multi-function machine with 2x work stations 1x notching, 1x unit for radius rounding including radius punching tools- manual angle adjustment 30 - 140 degrees 2x handwheels for angle adjustment- large / stable work table- 2x new angle stop, adjustable- automatic cutting gap adjustment- 1x freely movable foot switch- connection cable + 16A plug- cutting performance: 6.5 mm to 60° ST 5.0 mm to 60° VA 4.0 mm to 30° ST 3.0 mm to 30° VAThe data for this ad was created with ModulMWS - the software solution of LogoTe ...

: 500 kNhole diameter in sheet thickness: Ø 27 in 13 / Ø 28 in 10 mmno. of strokes: 23 Hub/minthroat: 130 mmstroke: 30 mmtotal power requirement: 3 kWweight of the machine ca.: 295 kgOverall size: 1100x900x1550 mmStandard equipment:- punching tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 50 mmpre-bending: 40 mmdiameter of upper rolls: 540 mmdiameter of lower rolls: 500 mmside roll diameter: 440 mmengine output: 55 kWtotal power requirement: kWweight of the machine ca.: 40 tdimensions of the machine ca.: 6,7 x 3,0 x 3,0 mWith:Cone bending deviceInduction hardened rollsDigital readout for side rollsFully welded steel (St-52) frameSeparate moveable control panelBending speeds, slow and fastElectronic ParallelismAll rolls are mounted in spherical roller bearingsHydraulically opened/closed drop end controlled from control panelActivation of cone rolling function and position adjustment via buttons onthe control panelCentral rolls (top and bottom rolls) driven by hydraulic motors andplanetary gear reducersElectro – hydraulic calibrationOPTIONAL FEATURES AND ACCESSORIES:Center support: 21.468,75 €Side supports (left and right): 17.346,7 ...

sheet width: 4100 mmplate thickness: 8,0 mm STpre-bending: 6,0 mm STdiameter of upper rolls: 300 mmside roll diameter: 210 mmdiameter of lower rolls: 270 mmtotal power requirement: 7,5 kWweight of the machine ca.: 9.930 kg.dimensions of the machine ca.: 6532 x 1730 x 1489 mmFurnishing:- electro-hydraulic 4-roller bending machine- 2x driven main rollers (upper & lower roller)- with hydraulic conical bending device- Induction hardened rollers- including straightening function for welded pipes- Control unit / display with touch screen function digital position display for the two side rollers- mobile control panel- 2x bending speeds selectable- hydraulic folding bearing- Safety device (safety line with switch unit)- Pressure gauge / pressure indicator for the rollers- CE mark + declaration of conformity- Operation manualThe data for this ad was created with ModulMWS - the software solution  ...

puncher: 70.0 tsquare edge steel: 45.0 x 45.0 mmround bar steel: 45.0 mmL-beam: 150 x 150 x 13 mmhole punching press: capacity (dia. x thick.): Ø 27.0 x 20 mmshear: flat material: 450 x 15 / 300 x 20 mmthroat: 300 mmwork stroke: 70.0 mmwork height max.: 1095 mmtotal power requirement: 9.0 kWweight: 1925 kgrange L-W-H: 1800 x 1200 x 2000 mm current new price approx. 25.000 euros special price on requestEquipment:- electro-hydraulic profile steel shears with 4x work stations flat steel shears profile steel shears hole punch notching station- driven by two hydraulic cylinders- stepless stroke adjustment- support table at hole punching & notching station- material stripper- side storage options- 2x freely movable foot switches- operating instructions (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

punching pressure: 45.0 tpunch diameter: 22 in 15.0 mmpunch diameter: 38 in 8.0 mmround bar steel: 30.0 mmsquare edge steel: 25.0 L-beam: 100 x 10.0 mmshear: flat material: 300 x 12.0 mmadjustment of stroke: 0 - 55 mmwork height max.: 940 / 1140 mmstrokes per minute: 34 punch diameter: max. 110 mmvoltage: 400 Vtotal power requirement: 4.5 kWweight: 1245 kgdimensions: 1520 x 590 x 1700 mm In good condition () New price ~ 13.000 Euro Special price upon requestFeatures:- Robust electro-hydraulic profile steel shear- With multiple workstations: Punching station Flat steel shear Angle/profile steel shear Notching station- Continuously adjustable stroke- Very compact design- Support table at the notching and punching station- Side support surfaces- 1x freely movable foot switch- Central lubrication system- Connection cable + connectorThe data for this ad was created with ModulMWS - the softwa ...

: gebraucht : 2023 : 9691 : prompt, Zwischenverkauf v : Türkei : 24600 €: 1 : 85 mm: 247 mm: 3 : 7.5 kW: 80x20 mm / 500 mm, 30x10 : 120x30 mm / 650 mm, 50x10 : 50x50 mm / 500 mm, 30x30 : Ø 50 mm / 500 mm, Ø 20 mm : Ø 100x2,5 mm / 1.300 mm, : 80x40x4 mm : 70x70x4 mm : 80x8 mm / 1.200 mm, 30x3 : 80x8 mm / 800 mm, 30x3 mm : 1580 mm: 1200 mm: 1410 mm: 2350 kgdemo machine / mint conditionnet price3 driven rolls (hydromotor and planetary gear)strong welded steel constructionlower rolls hydr. adjustabledigital read-out for lower rolls positionsplane rollslateral rolls (forward-backward hydraulic, rest manual)horizontal and vertical operationControl console forfor- andbackward drivemachine and equipment according to theCE regulationsINCL. OPTION: CONTINUOUS SPEEDWE HAVE MORE THAN 235 REFERENCES!BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum se ...

sheet width: 2100 mmplate thickness: 6 mmpre-bending: 4 mmupper roll diameter: 160 mmlower roll diameter: 140 mmside roll diameter: 120 mmtotal power requirement: 2,2 kWOverall size: 4140x1040x1140 mmweight of the machine ca.: 2.350 kgAccessories / equipment:- Conical bending device- induction hardened rolls- digital display for side rollers- Machine made of steel construction- Separate control panel- two speeds- all rollers on ball bearings- Folding and support bearing from the top roller is actuated from the control panel.When the folding bearing is opened, the roller moves automatically upwards.- Conical adjustment of the rollers via control panel- Central rollers are via hydraulic motor and rotary reduction geardriven. (Top and bottom rollers)- CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 3 mmpressure: ? ttotal power requirement: 3,5 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1,3 x 0,9 x 1,1 mNo. 3549Notching machine BOSCHERT K 30 / 120 MINI No. 1Working area: Table 800 x 450Drive: 3,5Foot switchTable 800 x 450 mm with T-slots 45° / 90° / 180° swivel 120° (2 x60°)Space requirement approx. 1300 x 900 x 1100 mmWeight approx. 850 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mmplate thickness: 3,3 mmpre-bending: 3,0 mmroll diameter: 90 mmmin. dia.: 130 mmtotal power requirement: 1,1 kwweight of the machine ca.: 570 kgdimensions of the machine ca.: 2100 x 800 x 1130 mmDomestic equipments:- Asymmetrical 3-roll round bending machine with motor drive- Upper roller swung out- Conical bending device- Main engine with brake deviceAdditional equipment:- motorized rear roller adjustment- Digital display for back roller- induction hardened rollsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4100 mmplate thickness: 35 mmpre-bending: 28 mmupper roll diameter: 540 mmlower roll diameter: 541 mmside roll diameter: 440 mmtotal power requirement: 37 kWweight of the machine ca.: 48.100 kgMachine dimensions approx.: 7670x3000x2930 mmAccessories / equipment:- Conical bending device- induction hardened rolls- digital display for side rollers- Machine made of steel construction- Separate control panel- two speeds- all rollers on ball bearings- Folding and support bearing from the top roller is actuated from the control panel.When the folding bearing is opened, the roller moves automatically upwards.- Conical adjustment of the rollers via control panel- Central rollers are via hydraulic motor and rotary reduction geardriven. (Top and bottom rollers)- CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 6,0 mmthickness at Niro-steel: 4,0 mmdistance between columns: 3100 mmno. of strokes: 18 Hub/mindown holder: 14 Stückoil volume: 150 ltr.cutting angle: 1,2 °control: CYBELEC CybTouchtotal power requirement: 11,0 kWweight: 6300 kgrange L-W-H: 4.000 x 2.100 x 1.640 mm--------------------------------------------------electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment-------------------------------------------------- Furnishing:- CNC electr. / hydraulic swing cut shears- CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting- motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.travel ...

: gebraucht : WA0102 : 292 €: 1 : 835 mm: 80 mm: 25 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2020 mmplate thickness: 2.0 mmdistance between columns: 2100 mmangle adjustable from - to: 130 Gradtotal power requirement: manuell weight of the machine ca.: 1850 kg.range L-W-H: 3100 x 725 x 1350 mm Exhibition machine - like NEW not yet in use () Special price on requestEquipment:- heavy/manual swivel bending machine, with counterweight- long service life thanks to robust welded steel construction- universally applicable for metalworking shops and craft businesses- quick and easy bending process using a bow handle- all bearings and guides in a stable design- easy adjustment of the upper beam for efficient work- manual adjustment of the lower beam- manually adjustable angle fixed stop with analogue degree displayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0147 : 890 €: 1 : 3050 mm: 105 mm: 85 mm(screwed 5x from above)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.