otras máquinas para el procesado de metales usadas para la venta (11,381)

Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095

Weight approx. 12000-15000 kg, cutting capacity for steel 16 mm, cutting capacity for stainless steel 10-12 mm, adjustable back gauge

equipped with 4 castors

Height 690 mm, travel 4070 mm, incl. REXROTH MS2N07-C1BRN-CMSH1-NNNNE-NN 3-phase motor

MINT 15 pieces

Technical data Manufacturer: Kurt Brunner OHG – OBRU Type: SAHIM Commission No: 71447 Strip width: 200 mm Belt clamping range: 200 – 550 Pulling force: 150 kg Configuration Type: Motorized decoiler with round plate Line-up: Floor-standing unit with base plate Drive: Electric motor with gearbox Operation: Separate control housing with start/stop buttons

included: lattice box.

Included: Pallet and accessories

Leuze electronic SLS 78/2 SE-24V , AOPD , 4 IEC61496-1,-2 , Order no. 50021208

Manufacturer: Carl Müller Maschinenfabrik Manufacturer's location: Solingen-Kotten, Germany Machine Type: Mechanical Eccentric Press / Stamping & Forming Press Model: EPS Year of Make: 1967 Design & Area of Application • Stationary C-frame press in solid cast design • Application: Metal processing, industry, workshops, series and small series production • Typical applications: stamping, punching, cutting, bending, embossing and simple forming work Drive • Mechanical drive via electric motor • Power transmission by means of flywheel and eccentric mechanism • High repeatability with constant stroke movement Pressing force • Nominal pressing force: approx. 16 tons • Maximum pressing force: approx. 20 tons Pestle • Slide stroke: approx. 10–70 mm • Adjustability of the plunger: approx. 45 mm • Vertically guided press ram for precise power transmission Frame • R ...

Consisting of drills in different sizes and designs, some of which are unused, incl. pallet

Power: 750W

Consisting of 5x machine vices in different sizes and designs, incl. pallet

Technical data Manufacturer: Schroeder & Bauer Type: HB5 Year of Make: 1982 Machine No.: 5211 Operating voltage: 380 V Frequency: 50 Hz Power: 1.5 kW Rated current: 3.6 A Configuration Type: Industrial press (electric drive)

Thermo electra Type 2xPT100-3L , Art no. P155555552001 , Prodwk 45-2004

Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: CHIRON Type: FZ 12 KW HS Year of Make: 2007 Serial Number: 253-57 Machine Type: CNC Vertical Machining Center Control: Siemens Sinumerik 840D Powerline Operating voltage: 3/N/PE 400 V Frequency: 50/60 Hz Control voltage: 230/24 V Power: 51 kVA Rated current: 73 A Fuse: 80 A Machine weight: approx. 7,500 kg Travel X: approx. 550 mm Travel Y: approx. 300 – 400 mm Travel distance Z: approx. 425 mm Spindle speed: up to approx. 12,000 – 15,000 rpm (HS version) Configuration Siemens 840D CNC control Double clamping system / pendulum machining Automatic tool changer Chip conveyor Cooling lubricant system Extraction system (Handte, built in 2007) Hydraulic syst ...

Tool magazine and tool changer Magazine Type: Chain Tool stations 80 pieces With electrical defect Coolant pressure 50 bar 2 additional work tables 400mm x 500mm

Siemens Safety Relay 3SK1121-1AB40 - Made in Germany

WENGLOR TC55NA3 Reflex Sensor , 0718R/D/11/75868

SICK WS12L-2D410 2022025

Without clamping devices and supports, only the press Technical data Manufacturer: REIS GmbH & Co. Maschinenfabrik Type: EC 8-20D Year of Make: 1994 Machine Type: Hydraulic trimming press Press force: 200 kN Retraction force: 35 kN Max. stroke: 500 mm Installation height: 800 mm Speeds: Fast forward: 620 mm/s Pressing cycle: 90 mm/s Return: 540 mm/s Hydraulic pressure: max. 175 bar Fuel tank capacity: 355 l Pneumatics: min. 6 bar, connection R1/2" Motor power: 7.5 kW Connected load: 8 kVA Control voltage: 24 V Clamping surface: Table: 800 x 600 mm Plunger: 800 x 500 mm Dimensions (L x W x H): 1895 x 1400 x 3150 mm Weight: approx. 5000 kg Configuration Vertical construction Suitable for die casting deburring processes Documentation available Used machine

Consisting of clamping devices and tool holders in various sizes and designs, some with tools

SICK Optex VT 180-N410 Optic Electronic, 6 008 790 , 0426S 12563 , Made in Japan

Mostly equipped with tools With lattice box

Incl. case

Various tool holders, most of them with tools With lattice box