tornos usadas para la venta (2,944)

Auction-ID: A1-45225-22

: neu : Bulgarien : 77840 €: 1471.18 €: 760 mm: 3000 mm: 380 mm: 132 mm: 520 mm: 560 mm: 11 : 140 MK: 17 : 7,5 - 1015 1/min: 150 : 0.039 - 18 mm/U: 0.02 - 9 mm/U: 0.5 - 180 mm: 60 - 1/6 Gänge/: 0.125 - 45 : 410 mm: 150 mm: 105 mm: 6 MK: 225 mm: 15 kW: 4470 kgdriven by conventional transmission3-axes digital readoutquick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)3-jaw chuck Bison3295/DIN6350, Ø 400 mmspindle dead centerfour way rapid traverse devicefoot pedal brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocktailstock quill reducermechanized movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 63 970,00 turnin ...

turning diameter over bed: 520 mmturning diameter over slide rest: 260 mmturning length: 1600 mmturning diameter in the gap: - mmturning speeds: 14 - 710 U/mincentre height: 260 mmspindle bore: mmtotal power requirement: 11,0 KWweight of the machine ca.: 2,9 tdimensions of the machine ca.: 4,0 x 1,4 x 1,6 mLead screw lathe- 4-jaw chuck 315mm- Multifix tool post size B- Feed in top slide- Steady rest- Machine feet- Chip trayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diámetro de giro sobre la cama: 280 mm Diámetro de giro sobre el reposadeslizamiento: 170 mm Longitud de torneado: 600 mm Peso de la máquina aprox. 400 kg Paso del husillo: 26 mm Velocidades: 55-2000 U/mínimo Potencia requerida total: 1,4 kW Dimensiones de la máquina aprox: 1,5 x 0,8x 1,3 m Incluyendo soporte de rectificado EMCO SOD Incluyendo mandril EMCO de 4 mordazas Incluyendo patas de máquina Incluyendo cambios de engranaje Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning diameter: 100 mmturning length: 320 / 345 mmcontrol: Siemens 840 D swing diameter: 145 mmspindle distance: 580 mmslide I:: slide I - cross travel: (X1) 220 mmslide I - longitudial travel: (Z1) 320 mmy-axis: +/- 30 mmrapid traverse: (X/Y/Z) 30/15/30 m/minslide II:: slide II - cross travel: (X2) 120 mmslide II - longitudial travel: (Z2) 345 mmrapid traverse: (X/Z) 30 m/minSubspindle:: Travel subspindle: (Z3) 380 mmvertical stroke: (X3) 145 mmbar material dia.: max. 36 mmrapid traverse: (X/Z) 20/30 m/minpower capacity: (40/100 % ED) 26/21 kWspindle turning speed range: 40 - 7200 U/mintotal power requirement: 42 kVAweight of the machine ca.: 5,3 tdimensions of the machine ca.: mCNC turning and milling centre with Y-axis, 2 turrets, subspindle andbar feeder.A total of over 44,000 EUR has been invested in necessaryrepairs and maintenance over the last 5 years by DMG MORI (replaceme ...

turning diameter: 420 mmturning length: 650 mmcontrol: Okuma OSP-U100L spindle bore: 95 mmspindle turning speed range: 2800 U/mintravel -x axis: 300 mmtravel -z axis: 675 mmmain drive motor: 22/30 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: 2700 x 1900 x 1885 mmFirst put into operation 2001.Spindle hours: 16.653 hrs.- 12-station turret (VDI 40) with driven tool stations, 3,000 rpm, 5.5 kW- Internal extraction system by Hengst Filtration (year of manufacture 2023)- Touchsetter, tool measurement- C-axis (main spindle)- Tool breakage and wear monitoring- 3-jaw chuck, Kitagawa B210, Ø250- Tailstock- Coolant supply, also through the tool- IGF dialog programming- Chip conveyor (scraper)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3600 mmswing diameter: 4500 mmturning height: 1850 mmmax. workpiece weight: kgvertical adjustment of the crossrail: mmtravel -x axis: mmtravel -y axis: mmtravel -z axis: mmturning speed range: 0,6- 50 U/minpower capacity: kWmax. torque on the faceplate: weight of the machine ca.: 72 tdimensions: mverticale turning machine double coloumn - digital scale - double coloumn - 2x ram - movable cross slide - extra toolholder (four station) on the side of facing plateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diámetro de torneado sobre la cama: 330 mm Diámetro de giro sobre reposacabezas: 200 mm Longitud de torneado: 800 mm Consumo total de potencia: 3 kWweight de la máquina aprox. 800 kg Dimensiones de la máquina aprox: 1,9x0,7x1,2 Rango de velocidad de giro: 24-2800 U/min Accesorios 2 mandrillos rotatorios con mordazas de repuesto 5 soportes Multifix Conjunto de ruedas intercambiablesDiversas puntas y accesoriosLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

control: Fanuc - - -: - - - - - -- - -: - - - - - -Vertical Turning Machine | EMAG - VL 4 with driven tools, equipped with a workpiece conveyor belt, a chip conveyor, and a coolant systemThe machine is in a well-maintained condition.Technical data of the machine will follow soon.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: VL4 | VL-4The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eje x: 332 mmz - eje: 625 mmcontrol: Fanuc Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning diameter: 1500 mmturning length: 4500 (5500) mmcontrol: Siemens 840 Dsl max. workpiece weight between centres: 6000 kgtotal power requirement: kWweight of the machine ca.: 40 tdimensions of the machine ca.: mCNC machine configured as a 4-way center lathe with full travel over the steady rests and superstructuresZ-axis travel (longitudinal slide) = 5000 mm (6000 mm with TAE3)X-axis travel (transverse cross slide) = 1000 mmY-axis travel (vertical movement) = 350 mmMaximum workpiece diameter = 1500 mmSwing diameter over cross slide = 1500 mmCenter distance = 4500 mm (5500 mm with TAE3)The cross slide and cross slide do not restrict the diameter range due to their lateral positioning on the lathe bed. Therefore, there is no associated diameter restriction over the cross slide/tool carrier.The cross slide unit, including the cross slide superstructure, can travel completely past the ...

turning diameter over bed: 660 mmturning diameter over slide rest: 450 mmturning length: 2000- 2880 mmthroat: Ø 1200 x 880 mmHeight of centres: 330 mmspindle passage: 85 mmturning speed range: 10- 700 U/mintail stock: MK 5 transmission ratio: 24 tool holder: Multifix C dimensions: 3,5/4,4 x 1,45 x 1,1 mweight of the machine ca.: 4,2 tkonv. lathe with movable bed for long gap.- movable bed 880 mm- swing Ø in gap: Ø 1400 mm- 3- jaw chuck Ø 315 mm- facing plate Ø 800 mm- facing plate Ø 500 mm- rapid travers- some tool holdersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 820 mmturning length: 6000 mmcontrol: Siemens Si 840 D sl total power requirement: 155 kWweight of the machine ca.: 65 tdimensions of the machine ca.: 16350 x 3700 x 3850 mPurchase price EUR 1.550.000Time recording from Feb. 2025Operating hours = 38601 hMain spindle = 1958 hMilling spindle = 1760 hCNC control Si 840D slWorking area 6000 mmWorking height 1390 mmSwing diameter over bed slide/bed 820 mmX-axis travel +850 -25 mmZ-axis travel 6820 mmC-axis, smallest increment +/-0.001°Workpiece spindleSpindle head according to DIN 55026 A15Bathing through 160 mmFront diameter Bearing 240mm2-stage gearbox, infinitely variable programmableDrive power at 100/60% duty cycle: 78/87kWSpeed ranges: 2Speed range I: 10-501 rpmSpeed range II: 10-1750 rpmTorque I, 60% duty cycle: 8000 NmTorque II, 60% duty cycle: 2308 NmC-axisHolding torque with backlash-free spindle brake: 3000 NmSpe ...

turning diameter: 720 mmturning length: 3000 mmcontrol: Siemens 805 turning diameter over slide: 430 mmturning speeds: 1800 U/mintailstock quill taper MT: 6 steady: 3 Stückmain drive motor: 36 kWz-axis: 3050 mmx-axis: 410 mmswing diameter over slide rest: 430 mmspindle motor: 28 kWworkpiece weight: 3000 kgspindle passage: 106 mm3-jaw-chuck diameter: 305 mmchip conveyor: faceplate: mmtotal power requirement: . kWweight of the machine ca.: 6 tdimensions of the machine ca.: 4x2,4x2 mSteady rest 1: Diameter: 120-300 mmSteady rest 2: Diameter: 220-400 mmSteady rest 3: Diameter: 350-500 mmChuck: Diameter: 315 mmMaximum workpiece weight: 3 t (with steady rest)The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m ...

bar material dia.: 20 mmspindle passage: 22 mmturning length: 170 mmturning speeds: 10.000 U/minpositive location each: C-Achse 0,001° Gradgripping station: 20 positive location each: 1° Gradturning speeds: 10.000 U/minnumber of tools: 7+4+8 number of milling stations: 3 control: Fanuc Oi-TD turning length: 170 mmNumber of axles: 5 St.spindle hours: 16.000 hNumber of working hours: 35.000 htotal power requirement: 11 kWweight of the machine ca.: 1900 kgdimensions of the machine ca.: 1,64 x 1,2 x 1,73 + SBF mbar loader: Robobar SBF 320e 3200mm Stangeparts conveyor: nein oil mist filter: ARO swiss type machine Tornos Delta 20/5, built 2011, with barloaderRobobar SBF 20eExcellent conditions,from precision engineeringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mmturning length: 230 mmcontrol: Fanuc total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mFanuc controlat each spindle is a 3-jaw chuck mounted2x 12-fold revolverchip conveyorcoolant deviceTechnische Daten: / technical detailsSchwingdurchmesser / rotary diameter 500 mmmax. Drehdurchmesser / max. turning diameter 400 mmmax. Drehlänge / max. turning length 230 mmX-Weg / X-travel 220 mmZ-Weg / Z-travel 230 mmmax. Drehzahl der Spindeln / max. spindle speed of the spindles 2000 UpM /rpmAnzahl der Revolverplätze / number of tool places 2x 12 Eilgang x, z / rapid feed x, z 30, 30 m/minAntriebsleistung Spindeln / drive capacity spindles 18,5/15 kWGewicht ca. / weight ca. 9400 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, acces ...

faceplate diameter: 4000 mmswing diameter: 4200 mmturning height: 2000 mmworkpiece weight: 50000 kgcross travel of ram-slide: 2300 mmslides vertical travel: 1250 mmswival range +/-: -15/+30 Gradfaceplate turning speed range: 0,5 - 55 U/minControl: Fagor 8055i CNC total power requirement: 182 kWweight of the machine ca.: 134 tdimensions of the machine ca.: 5920 x 10200 x 8400 mmMachine overhauled in 2008- CNC Control FAGOR 8055i- Tool C8- Chip ConveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 430 mmturning diameter over slide rest: 220 mmturning diameter in the gap: . mmturning length: . mmturning speeds: 12,5-1600 U/minbed width: 410 mm3-jaw chuck: 250 mmspindle passage: 550 mmcentre distance: 750 mmtotal power requirement: kWweight of the machine ca.: 2 tdimensions of the machine ca.: mNo. 65The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamT ...

: neu : Bulgarien : 53750 €: 1015.88 €: 630 mm: 2000 mm: 315 mm: 103 mm: 430 mm: 400 mm: 11 : 120 MK: 21 : 12,5 - 1250 1/min: 120 : 0.04 - 12 mm/U: 0.02 - 6 mm/U: 0.5 - 120 mm: 60 - 1/4 Gänge/: 0.125 - 30 : 240 - 1 : 315 mm: 90 mm: 90 mm: 5 MK: 230 mm: 11 kW: 3310 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 315 mmspindle dead centerlongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.000 mm € 50 880,00 turning length1.500 mm € 51 960,00 turning length3.000 mm € 58 400,00 turning length4.000 mm € 63 790,00 turning ...

number of spindles: 8 spindle passage: 36 mmturning length: 250 mmspindle bearing diameter: 358,2 mmbar material dia.: 36 mmbar length: 4000 mmlongitudinal slide -travel: 145 / 250 mmcross slide - travel: 80 mmspindle turning speed - stepless: 560 - 4000 U/minspindle motor: 28 kWTotal weight, approx.: 8500 kgdimensions of the machine ca.: 5850 x 1900 x 2580 mmxmmxmm- Beckhoff CNC control system (Win2000)- IEMCA 4m bar feeder (PRA52/P-Typ42)+ Hydraulic catch chute+ Mechanical end-piece chute with container+ Parts conveyor belt+ 3–4 bar oil connection+ 100 bar high-pressure connection+ 1 HYDAC hydraulic oil cooler+ 1 oil cooler for cutting oil+ 1 chip conveyor+ 1 magnetic roller for sludge removal+ 1 new air conditioning unit for control cabinet / year of manufacture 2025+ Feed block: new brass strips fitted in 2023, making the machine as good as new+ Spindle couplings 2nd, 4th and 6t ...

turning diameter: 320 mmturning length: 600 mmcontrol: Fanuc Oi-TD spindle bore diameter: 74 mmnumber of controlled axis: 2 turning speed range: 3000 U/minrapid speed: 20 m/minnumber of tapers in turret head: 12 direkttail stock: Ja power requirement: 15 kWweight: 5,0 tdimensions: 3,7 x 1,6 x 2,0 mUsed CNC- Lahte 2 axis- 3 jaw chuck Ø 250 mm- chip conveyor- oil dust collector- Tool presetterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 280 mmturning length: 400 mmcontrol: Fanuc 18 T spindle bore diameter: 51 mmnumber of controlled axis: 2 turning speed range: 0 - 4000 U/minrapid speed: 30 m/minnumber of tapers in turret head: 12 VDI 40tail stock: Ja dimensions: 3,9 x 1,6 x 2,1 mweight: 4,0 tweight of the machine ca.: 3,9 tpower requirement: 15 kWUsed CNC- Lahte with box way, 2 axis- 3 jaw chuck Ø 200 mm- chip conveyor- oil dust collectorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 42 / 140 mmturning length: 170 mmcontrol: Mitsubishi Meldas turning speeds: 80-8.000 U/minc-axis: 0,001° turret (x-stations): 2x 12 (VDI 20) angetriebenturning speeds: 45-4.500 U/mingripping station: 42 mmspindle: 1 kWturning speeds: 60-6.000 U/minc-axis: 0,001° number of controlled axis: 8 collet unit: 48 DIN 6343 .Number of working hours: 10769 hchip conveyor: ja/yes Bj. 2018total power requirement: 7,5 / 11 kWweight of the machine ca.: 3,3 tdimensions of the machine ca.: 2,4 x 1,6 x 2,2 mCNC turning and milling machine CITIZEN BOLEY BE 42, year 2007Simultaneous working with 7 axes on main and pick-up spindlevery good condition, operating hours 21.999h (September 2024)Accessories:# Various tool holders:5x axiale driven tool holder# collet chuck for collets type 173E# additional coolant cooler# Knoll chip conveyor, year of construction 2018The Boley BE 42 is without  ...

turning diameter: 376 mmturning length: 1245 mmcontrol: FANUC i-Series turning diameter over bed: 376 mmx-travel: 230 mmz - travel: 1350 mmrapid travel x/y/z: 24/30 m/minmain spindle speeds:: 2800 spindle motor: 35 / 26 kWmax. torque on the spindle: 1613 Nmspindle passage: 102 mmtotal power requirement: 33,91 Kvaweight of the machine ca.: 7 tdimensions of the machine ca.: 4,6 x 2,11 x 2,3 mEquipped with:- Fanuc i-Series CNC control- C-axis- 3-jaw chuck, 304 mm diameter- 12-station tool turret- Tailstock- Chip conveyor- CEOnly 2,300 spindle hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diámetro de torneado: 1800 mm Longitud de giro: 600 mm control: Siemens 6 - Mandíbula Chuck: ? Diámetro del husillo: 130 mm nariz del husillo: DIN 55027 Größe 11 rango de velocidades de giro: 1 - 400 U/minmax. Par motor en el husillo: 9000 Potencia total requerida: 38 / 52 kWweight de la máquina aprox: 25 tDimensiones de la máquina aprox. 6x3x2,5 m Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

diámetro de torneado: 340 mm longitud de tornado: 1,135 mm. control: Sinumerik 840D Programa sobre: aprox. 22.000 diámetro de giro sobre la cama: 700 mm distancia al husillo: 1,470 mm, potencia total requerida: kWweight de la máquina, aprox. 14,5 tdimensiones de la máquina, aprox. 5,614 x 2,417 x 2,419 m. Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning length: 2000 mmgreates pass round over bed: 630 mmswing diameter over slide rest: 350 mmcontrol: Monforts Control System K bed width: 550 mmturning speed range: 2 - 1800 U/minspindle diameter in front bearing: 120 mmspindle head DIN 55027 - Size: 8 tool taper: RD2 PARATquill stroke: 210 mmspindle bore: 71 mmtotal power requirement: 30 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 4,90 x 2,10 x 2,00 mThree-jaw chuck / key bar / Ø250mmFour-jaw chuck3-jaw chuck for tailstock4-station tool post head PARATFixed steady rest, Ø smallFixed steady rest, Ø largeVarious chuck jaws, live centers, live centers, tool holdersChip conveyor with coolant pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Paso del husillo: 80 mm máx. diámetro de giro: máximo 395 mm. Longitud de giro: 750 mm. Control: System TX 8H máximo. Velocidad del husillo: 3,150 U/min. Torno CNC | TRAUB - TNA 400La máquina está en buen estado.- - - - - - #Tags:TNA400 | TNA-400Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

max. working diameter: 610 mmmax. working lenght: 1.522 mmtravel -x axis: 740 mmtravel -y axis: 410 mmtravel -z axis: 1.838 mmcontrol: MAZATROL Fusion 640M Pro b-axis: 240 °c-axis: 360 °number of spindle speeds: 4.000 U/minspindle bore: 88 mmmilling spindle turning speed range: 12.000 U/minnumbers of positions in the tool changer: 80 CNC Turning- and Milling Center | MAZAK - INTEGREX E-410HThe machine is in a well-maintained condition.The machine video from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: INTEGREXE41H | INTEGREX 410H | INTEGREX-E410 HThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle passage: 80 mmmax. turning diameter: 460 mmMax. Turning length: 1.000 mmcontrol: System TX 8F max. Spindle speed: 2.800 U/min.CNC lathe | TRAUB - TNA 500The machine is in a well-maintained condition.The machine videos from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags:TNA500 | TNA-500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.