tornos usadas para la venta (2,807)

centre distance: 1000 mmturning diameter over bed: 420 mmturning diameter over bed slide: 235 turning length: 1000 mmspindle taper: DIN 55027 Gr. 6control: MANUALPlus 4110 spindle bore: 51 mmturning speed range: 3 - 3000 U/minfeed:: 5.000/10.000 mm / mindrive capacity - spindle motor: 11 kWtaper in tailstock-quill: MK 4 dia. of quill: 70 mmquill stroke: 110 mmcoolant: ja/yes voltage: 400 VNumber of working hours: 6.908 hweight of the machine ca.: 3 tdimensions of the machine ca.: 3,4 x 2 x 2,2 mBOEHRINGER DUS 400 ti CNC cycle-controlled lathe, built in 2006-Control system: Heidenhain ManualPlus 4110-11 kW AC main drive with 2-stage gearbox-Work area cover with chip guard door-Control panel mounted on the support, moves with the machine-Holding brake-Programmable cycles-4-position quick-change turret-Size 2 tool holder on fixed base-With 1 WD ‘/25’ tool holder-Tailstock-Rapid traverse ...

turning diameter: 65 mmturning length: 150 mmcontrol: Siemens 840D spindle passage: 75 mmturning length: 150 mmc-axis: 2x 0,001 °gripping station: 65 mmspeeds: 5000 U/minrapid traverse: 30 m/minturret (x-stations): 3x12 Number of axles: 10 St.number of toolholder-holes: 36 chip conveyor: ja / yes kWcoolant filtering unit: ja / yes kWNumber of working hours: 35000 htotal power requirement: 22 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 4,4 x 2 x 2,3 + Iemca mbar loader: Iemca Master 880 DMG Sprint 64 Linear CNC lathe, built in 2007, 10 axes, 2 spindles,3 turrets with Iemca Master 880 loading magazineAccessories:a large number of tool holdersin total 104 off, 24 of them are driven tool holderThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar material dia.: 32/38 mmspindle passage: 44 mmturning length: 320 mmturning speeds: 200-8000 U/minc-axis: 0,001 Gradgripping station: 32/38 mmturning length: 120 mmturning speeds: 200-8000 U/minc-axis: 0,001 0number of tools: 13 fixnumber of milling stations: 4+5 drivencontrol: Mitsubishi Meldas M70 Number of axles: 5+2 St.total power requirement: 7,5 kWweight of the machine ca.: 2850 kgdimensions of the machine ca.: 2,5 x 1,4 x 1,75 + FMB mbar loader: FMB turbo 3-36 fire distinguisher: Kraft & Bauer CNC sliding headstock machine Citizen L32-1M8, built 01/2019 with barloaderFMB turbo 3-36equipped with swarf & coolant tank, fire distiguisher.ON/OFF 29.564h (status 24.03.2026)Running hours 26.607h (status 24.03.2026)GBL function (standard)LFV function: noThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mmturning length: 230 mmcontrol: Fanuc total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mFanuc controlat each spindle is a 3-jaw chuck mounted2x 12-fold revolverchip conveyorcoolant deviceTechnische Daten: / technical detailsSchwingdurchmesser / rotary diameter 500 mmmax. Drehdurchmesser / max. turning diameter 400 mmmax. Drehlänge / max. turning length 230 mmX-Weg / X-travel 220 mmZ-Weg / Z-travel 230 mmmax. Drehzahl der Spindeln / max. spindle speed of the spindles 2000 UpM /rpmAnzahl der Revolverplätze / number of tool places 2x 12 Eilgang x, z / rapid feed x, z 30, 30 m/minAntriebsleistung Spindeln / drive capacity spindles 18,5/15 kWGewicht ca. / weight ca. 9400 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, acces ...

turning diameter: 330 mmturning length: 669 mmcontrol: Sinumerik 828D total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Sinumerik 828D12-fold revolver Sauter VDI40driven toolsC-axis3-jaw chuckTool Eyepart catcherchip conveyortail stockcoolant device with high pressure pumpbar loading device IemcaTechnische Daten / technical details:Umlaufdurchmesser über Bett / rotary diameter over bed 600 mmmax. Drehdurchmesser / max. turning diameter 330 mmmax. Drehlänge / max. turning length 669 mmX-Weg / X-travel 260 mmZ-Weg / Z-travel 762 mmDrehzahl / spindle speed 3400 UpM /rpmWerkzeugrevolver / turret head 12 fach /holesmax. Stangendurchmesser / max. bar diameter 75 mmEilgang X / rapid feed X 20 m/minEilgang Z / rapid feed Z 24 m/min.Gewicht der Maschine ca. / weight ca. 5700 kgT ...

turning diameter over bed: 330 mmturning diameter over slide rest: 190 mmcentre distance: 650 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mturning length: mm3-jaw chuckMultifix tool holder devicetail stock coolant deviceTechnische Daten / technical details:Spitzenweite / center to center 650 mmDreh-Ø über Bett / turning diameter over bed 330 mmDreh-Ø über Schlitten / turning diameter over sledge 190 mmSpindelbohrung / spindle hole 36 mmDrehzahlbereich / spindle speed 30-2500 UpM /rpmAntriebsleistung / drive capacity 2,2 kWGewicht der Maschine ca. / weight ca. 600 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech ...

diámetro de torneado: 680 mm. Longitud de tornado: 600-635 mm. control: Siemens requerimiento total de potencia: kWpeso de la máquina, aprox. 6500 kg. Dimensiones de la máquina. Ca.: m. Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

diámetro de torneado: 340 mm. Longitud de vuelta: 500 mm. Control: OSP 7000L consumo total de potencia: kWpeso de la máquina, aprox. 4000 kg. Dimensiones de la máquina, aprox. m. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Maximum turning diameter: 2800 mmMaximum swing diameter: 3000 mmdiameter of spindle flange: 1100 mmcontrol: Siemens 840 D sl Table rpm: 230 1/minMaximum speed of driven tools: 6000 1/minx-travel: 2700 mmz-travel: 1000 mmFeed - X: 24 m/minfeed capacity - x: 22 kNtool taper: CAPTO C8 total power requirement: 200 kVAdimensions of the machine ca.: 10,4 x 6.3 x 5,7 mweight of the machine ca.: 120 tEquipment/Accessories: - 2 tool changers one with 25 positions and one with 41 positions- 2 x chip conveyors- Coolant system, 6 bar- High-pressure cooling, 70 bar - Knoll paper belt filter - 12-jaw balancing chuck, RÖHM - internal coolant supply- Hydraulic unit - Automatic door - Electric handwheel - Technical documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 420 mmturning length: 1350 mmspindle passage: 101 mmcontrol: Siemens SL 828D ShopTurnnumber of controlled axis: 4 turning speed range: 3000 U/minpower requirement: 22/18,5 kWrapid speed: 30 m/minnumber of tapers in turret head: 12/24 BMT 65number of driven tools in turret: 12 BMT 65Spindel speed of driven tools: 5000 U/minSpindelpower on driven tool: 7,5/5,5 kWy-axis: +/- 65 mmtail stock: MT-5 weight: 8,0 tdimensions: 5,7 x 2,3 x 2,32 mHeavy CNC- lathe with driven tools and Y- Axis in very good condition.First instalation: 03/2023 Appr. 5400 h Power on.- 2x 3-jaw chuck Ø 325 + 400 mm- some fixed tool holders- Tool pre- setter- chip conveyor- 4x driven tool holders- 2 + 2 driven toolholders with Capto C4- oildust collector- band filter system with appr. 1000 ltr.- hydr. steady moveable wit turret SMW Autoblock SLU-X3.1 (Ø 20- 165 mm)- 3 colour signal lamp- coolant gun- ...

turning diameter: 360 mmturning length: 1000 mmswing diameter over bed slide: 215 mmreus: 30 - 3000 U/minspindle bore: 38 mmfeed: längs 0,043 - 0,653 m/mintotal power requirement: 3,5 kWweight of the machine ca.: 1500 kgdimensions of the machine ca.: 1900 x 900 x 1300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 200 mmturning length: 393 mmcontrol: MSX 853 weight of the machine ca.: 3,5 ttotal power requirement: kWdimensions of the machine ca.: mMSX 853 cnc control3-jaw chuck diameter 210mm12-fold revolverC-axisdriven toolstail stockcoolant devicechip conveyorTechnische Daten: / technical detailsDrehdurchmesser / turning diameter 200 mmDrehlänge / turning lenght 393 mmX-Weg / X-travel 160 mmZ-Weg / Z-travel 450 mmmax. Drehzahl Spindel / max. spindle speed 50-3000 UpM /rpmEilgang X/Z / rapid feed X/Z 24/30 Anzahl der Revolverplätze / number of tool places 12 max. Stangendurchmesser / max. bar diameter 51 mmAntriebsleistung Spindel / drive capacity spindle 13,5 kWGewicht ca. / weight ca. 3500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of ...

turning diameter: max. 356 mmturning length: 705 mmcontrol: MSX 850 III MAPPS Mitsubishigreates pass round over bed: 923,8 mmSwing dia. over traverse guideway: 755 mmstandard turning dia.: 275 mmMain spindle:: max. spindle speed: 4.000 min/-1power capacity - main spindel: 18,5 / 15 kWspindle nose: JIS A2-8 spindle bearing diameter: 140 mmspindle bore: 91 mmmax. bar capacity: 80 mmchucking diameter: 305 mmC-Axis: 0,001 °Subspindle:: Spindle speed range subspindle: max. 6.000 min/-1power capacity - Sub spindle: 11 / 7,5 kWspindle nose: JIS A2-5 spindle bearing diameter: 85 mmspindle bore: 43 mmchucking diameter: 210 mmC-Axis: 0,001 °turret:: number of toolpositions: 12 pos.Number of driven toolspositions: 12 pos.Shank diameter: 26 mmDrill shank diameter: 50 mmSpindle speed - driven tool stations: max. 6.000 min -1turret change time: 0,25 sec.axis stroke:: x-axis: 260 mmz-axis: 795 mm ...

turning diameter: 210 mmturning length: 700 mmcontrol: Okuma OSP-E 100 L total power requirement: 35,7 kVAweight of the machine ca.: 7,1 tdimensions of the machine ca.: 2660 x 2000 x 2330 mCNC turning and milling center with C-axis and Y-axis,2 turrets, and subspindle.CNC control: Okuma OSP-E 100 LMaximum turning diameter: 210 mmSwing over bed: 400 mmDistance between spindle noses: 960 mmMain spindle:Spindle bore: 53 mmSpeed range: 50 to 6000 rpmMotor power: 11/7.5 kWSubspindle:Spindle nose: JIS A2-6Speed range: 38 to 5000 rpmMotor power: 11/7.5 kWZ-axis:Travel: 700 / 700 mm (ZA + ZB)Rapid traverse: 40000 mm/minW-axis:Travel: 940 mmRapid traverse: 40000 mm/minX-axis:Travel: 167 / 192 mm (XA + XB)Rapid traverse: 30000 mm/minY-axis:Travel: 92 mm (+50/-42 mm)Rapid traverse: 15000 mm/minC-axis:Indexing: 360° x 0.001°Rapid traverse: 400 rpmDisc turret:2 x 12 stationsTool holder mount: VDI 3 ...

turning diameter: 570 mmturning length: 2000 mmcontrol: num + CNC Keller centre height: 280 mmturning dia. over face-slide: 365 mmspindle bore: 62 mmspindle turning speed range: 3 - 2500 U/minspindle head: DIN 55 027 Gr. 8 cutting speed: Konstant 1 - 9999 m/minfeed in x - axis: 0,01 - 50 mm/Ufeed range Z-direction: 0,01 - 50 mm/Urapid travel - longitudinal/face: 10 / 5 m/minfeed power: x-Achse 7100 Nfeed power: z-Achse 12.500 Ntravel of cross-slide: 345 mmupper slide travel: 125 mmbed width: 360 mmtailstock quill diameter: 80 mmtailstock quill stroke: 190 mmtailstock taper MT: 5 max. workpiece weight -without tailstock: 400 kgmax. workpiece weight between centres: 1000 kgmax.workpiece weight:each extra steadyrest: 300 kgthreading metric: 0,1 - 400 mm/Stg.dimensions of machine L x W x H: 3,98 x 1,87 x 1,81 mtotal power requirement: kWweight of the machine ca.: tAccessories: 3-jaw ch ...

diámetro de torneado: 500 mm longitud de vuelta: 1000 mmcontrol: Heidenhain requerimiento total de potencia: kWweight de la máquina aprox: 3200 kg dimensiones de la máquina ca.: m Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Diámetro de torneado: - mmLongitud de tornado: - mmControl: Consumo total de potencia: kWpeso de la máquina ca.: tDimensiones de la máquina ca.: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning diameter: 570 mmturning length: 1000 mmcontrol: WEILER D3 swing diameter over slide rest: 325 mmSwing in gap: 600 mmlength of gap: 140 mmspindle bore: 83 mmspindle diameter in front bearing: 120 mmface stroke: 340 mmlongitudinal stroke: 1100 mmworkpiece weight max.: 1200 kgspindle turning speed - stepless: 1 - 2500 U/mintransmission ratio: 2 rapid travel - longitudinal/face: 10 / 5 m/minmain drive motor: (60/100 % ED) 20 / 17 kWtailstock quill diameter: 80 mmtailstock quill stroke: 200 mmtailstock quill taper MT: 5 weight of the machine ca.: 3,8 tdimensions of the machine ca.: 2,95 x 1,90 x 1,82 mSwitch-on hours (date 18. May 2026): 28.970 h Control WEILER D3 Chip conveyor 4-station toolholder PARAT with several inserts 3-jaw chuck SCHUNK ROTA-S plus 315-92The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 500 mmturning length: 1200 mmcontrol: Siemens 840D greates pass round over bed: 700 mmMain spindle:: turning speed range - main spindle: 20 - 5000 min/-1power capacity - main spindel: 25 /34 kWC-Axis: 0,0001 °spindle diameter: 65 mmmilling spindle: milling spindle motor: 23 / 13 kWmilling head speed: 12000 U/minb-axis: +/- 120 °axis stroke:: x-axis: 490 mmy-axis: +/- 100 mmz-axis: 1300 mmfeeds:: rapid traverse ( X / Y / Z ): 60 / 22,5 / 30 m/minfeed power: 5,6 / 5,6 / 7,4 kNnumber of toolpositions: 24 pos.tool taper: HSK A 63 total power requirement: - kWweight of the machine ca.: 15 tdimensions of the machine ca.: 6 x 3 x 2,3 mCNC turning and milling center - 5 axes simultaneous- CNC control Siemens 840D Ergo Line with ShopTurn- C-axis (0.0001°)- Milling head with B-axis- Y-axis- Coolant device/paper belt filter (through Spindle)- Chip conveyor- Tailstock- SMW A ...

max. turning diameter: 580 mmturning length: 1500 mmcontrol: OSP 7000 L greates pass round over bed: 610 mmswing diameter over slide rest: 580 mmMain spindle:: turning speed range - main spindle: 12 - 2.800 min/-1spindle bearing diameter: 150 mmspindle bore: 110 mmspindle nose: JIS A2-11 power capacity - main spindel: 37 (30) kWC-Axis: 0,001 °axis stroke:: x-axis: 598 mmy-axis: 230 (+110 / -120) mmz-axis: 1.660 mmfeeds:: rapid traverse: X / Y: 12.000 mm/minrapid traverse: Z: 20.000 mm/minrapid traverse: C: 100 min/-1cutting feed speed: X / Z / Y: 0,001 - 1.000 mm/Uturret:: type: H2 ATC number of toolpositions: 2 (1x L-Tool / 1x M-Tool) pos.driven statition: stufenlos / stepless Spindle speed - driven tool stations: 40 - 3.000 min -1tool shank height: 25 mmBoring bar shank diameter: 50 mmTailstock:: diameter of quill: 120 mmquill stroke: 170 mmtaper of center: MT 5 tool magazin:: n ...

Diámetro de torneado: 16 mm Paso del husillo: 16 mm Longitud de giro: 160 mm Control: GE FANUC Serie 18 I-T Rango de velocidad de giro: 8000 U/min. Giro rápido: 30 m/min. Potencia total: 2,2 kWweight de la máquina aprox. 2,1 tAccesorios: cargador de barras IEMCA, GENIUS 226-32 L, YOM 2002 (para diámetro de barra 2 - 26 mm y longitudes de barra 1500 - 3210 mm), Cinta de chips, refrigeranteLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

faceplate diameter: 6300 mmswing diameter: 9700 mmturning height: 4900 mmram head dimension: 360 x 360 mmfaceplate turning speed range: 0,4 - 50 U/minworkpiece weight: 150 tmain drive motor: 71 kWControl: Siemens Sinumerik 840D total power requirement: 230 kVAweight of the machine ca.: - tdimensions of the machine ca.: - m2010 overhauled and modernised, new electric etc, equipped with:- Siemens Sinumerik 840D (2 Panels Left/right Side)- C-axis and milling spindle- 2 ram support on cross beam- milling spindle with 1000 rpm, 28kW (right ram)- Turning support (left ram)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter max. over bed cover: 570 mmswing diameter over face slide: 420 mmcontrol: Heidenhain CNC PILOT longitudinal stroke: 635 mmface stroke: 220 spindle bore: 79 mmcentre distance: 1000 mmchucking diameter: 250 mmtailstock taper MT: 4 feed speed longitudal: 0,025-24.000 mm/min.feed speed face: 0,025-20.000 mm/min.power feed longitudinal: 7.000 NFeed Force Face: 3.500 Ntotal power requirement: 44 weight of the machine ca.: 5,7 tdimensions of the machine ca.: 7,5 x 4,0 x 1,7 mAccessories: - 3 clamping jaws - various tool holdersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diámetro de la placa frontal: máximo 1000 mm. Par motor en el husillo: 900 Potencia total requerida: 17 kWweight de la máquina aprox. 6,1 tdimensiones de la máquina aprox: mUn torno de torneado vertical con raíl transversal fijo Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

control: FANUC Series 31i Model 5 turning diameter: 540 mmturning length: 1040 mmc-axis: indexing: 0.001 °turning speeds: -5000 U/mintool taper: ASA A2-6 Top turret tool hodler:: 12 y-travel: 170 (+/- 85) mmrapid traverse X-axis: 36 / 24 m/minrapid traverse Z-axis: 36 / 26 m/minOverall size: 8000 x 3000 x 3000 mmweight of the machine ca.: 12000 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 450 mmturning length: 380 mmcontrol: Seicos 40L Multi max. machining diameter: 340 mmBar feed: 51 mmturning speed range - spindle: 30 ~ 5.000 U/mindrive capacity - spindle motor: 11 / 7,5 kWspindle nose: A2-6 spindle bore: 59 mmbearing diameter: 100 mmtravel -x axis: 215 mmtravel -z axis: 400 mmturret (x-stations): 16 feed: 0,001 ~ 500 mm/minrapid traverse: X/Z: 30 m/minShank diameter: 25 x 25 mmDrill shank diameter: 40 mmtail stock: taper of center: MK 5 tailstock adjustment: 300 mmtotal power requirement: 23 kVAweight of the machine ca.: 4,6 tdimensions of the machine ca.: 5,5 x 2,8 x 2,2 mDocuments: Chip conveyor: Tailstock: Signal-Light: Parts removal: tool setter: work light: tool holders: (Revolver / Turret) CNC LatheHITACHI SEIKI - HiTec-Turn HT 20 RIIIThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 640 mmswing diameter over face slide: 435 mmcontrol: Siemens SINUMERIK 810D pl turning speed range: 3 - 2.500 U/mincentre distance: 1.500 mmspindle bore: 70 mmspindle diameter in front bearing: 100 mmLathe - cycle-controlled | VDF-BOERHRINGER - DUS 630 tiThe machine is in good condition and can be inspected under power at any time.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DUS630ti | DUS 630ti | DUS 630 tiThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 480 mmturning diameter over slide rest: 260 mmturning length: 1500 mmturning diameter in the gap: - mmturning speeds: 90 - 1120 U/mincentre height: 240 mmspindle bore: 52 mmtotal power requirement: 7,5 KWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 3,0 x 1,3 x 1,5 mEngine Lathe- 3-jaw chuck (200 mm)- Quick-change tool post- Steady rest- Machine lamp- Chip tray- Center pointThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diámetro de torneado: 465 mm. Longitud de tortuda: 1050 mm. Control: Heidenhain eje x: 300 mm, consumo total de potencia: kWpeso de la máquina, aprox. 7600 kg. Dimensiones de la máquina ca.: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Diámetro de torneado: - mmLongitud de giro: - mmControl: - Consumo total de potencia: - kWweight de la máquina aprox.: - tDimensiones de la máquina ca.: - mEn nombre del clienteLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.